Help needed about building snd_dummy with the dummy.c in skypopen
Hi, I am trying to follow this wiki: http://wiki.freeswitch.org/wiki/Skypiax_Skype_Endpoint_and_Trunk to setup FS and Skypopen on Ubuntu 8.04(64bit server inside virualbox). There is one step asks me to build snd_dummy: http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#ALSA_and_t... The section is like below: Ubuntu, Debian Note, Ubuntu may have alsa sound drivers installed at /lib/modules/<your kernel version>/ubuntu/sound/..., you may need to remove the dir to allow modprobe search from the default place: /lib/modules/<your kernel verision>/kernel/sound/ (don't forget to rerun /sbin/depmod after removing the old sound directory. Eg: /sbin/depmod -a 2.6.24-24-server). ./configure --with-redhat=no \ --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer \ --with-card-options=all make && make install After the first *make && make install*, copy mod_skypopen/configs/alsa/dummy.c to alsa-driver-1.0.20sound/drivers/dummy.c . make && make install #again :) The problem is after I did all of them, when I entered modprobe snd_dummy, it always crashed and returned as "killed" on my terminal, I could see it dumped out a huge block or data(numbers, etc) on the host but don't understand the meaning. While if I used the original dummy.c inside alsa-driver-1.0.20, it worked fine. Besides, the default ubuntu installation doesn't include kernal dev and source, so I did one more step(or it cannot build alsa). Did anyone try the same and get it working? Thanks! Jian
Maybe is a problem with virtualbox. Also, is known that fs+mod_skypopen+skype clients does not works in virtualbox. Try it on a real (hardware) machine. Or (but is less popular) in a xen like virtual machine. -giovanni On Thu, Oct 21, 2010 at 4:21 PM, Jian Ren <renjian@gmail.com> wrote:
Hi, I am trying to follow this wiki: http://wiki.freeswitch.org/wiki/Skypiax_Skype_Endpoint_and_Trunk to setup FS and Skypopen on Ubuntu 8.04(64bit server inside virualbox).
There is one step asks me to build snd_dummy: http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#ALSA_and_t... The section is like below:
Ubuntu, Debian
Note, Ubuntu may have alsa sound drivers installed at /lib/modules/<your kernel version>/ubuntu/sound/..., you may need to remove the dir to allow modprobe search from the default place: /lib/modules/<your kernel verision>/kernel/sound/ (don't forget to rerun /sbin/depmod after removing the old sound directory. Eg: /sbin/depmod -a 2.6.24-24-server).
./configure --with-redhat=no \ --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer \ --with-card-options=all make && make install
After the first make && make install, copy mod_skypopen/configs/alsa/dummy.c to alsa-driver-1.0.20sound/drivers/dummy.c .
make && make install #again :)
The problem is after I did all of them, when I entered modprobe snd_dummy, it always crashed and returned as "killed" on my terminal, I could see it dumped out a huge block or data(numbers, etc) on the host but don't understand the meaning. While if I used the original dummy.c inside alsa-driver-1.0.20, it worked fine. Besides, the default ubuntu installation doesn't include kernal dev and source, so I did one more step(or it cannot build alsa).
Did anyone try the same and get it working?
Thanks! Jian
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
Tried under VMPlayer, got the same problem, will try real machine later. Attached is the screen shot. Thanks! Jian On Thu, Oct 21, 2010 at 4:45 PM, Giovanni Maruzzelli <gmaruzz@gmail.com>wrote:
Maybe is a problem with virtualbox. Also, is known that fs+mod_skypopen+skype clients does not works in virtualbox.
Try it on a real (hardware) machine.
Or (but is less popular) in a xen like virtual machine.
-giovanni
On Thu, Oct 21, 2010 at 4:21 PM, Jian Ren <renjian@gmail.com> wrote:
Hi, I am trying to follow this wiki: http://wiki.freeswitch.org/wiki/Skypiax_Skype_Endpoint_and_Trunk to setup FS and Skypopen on Ubuntu 8.04(64bit server inside virualbox).
There is one step asks me to build snd_dummy:
http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#ALSA_and_t...
The section is like below:
Ubuntu, Debian
Note, Ubuntu may have alsa sound drivers installed at /lib/modules/<your kernel version>/ubuntu/sound/..., you may need to remove the dir to allow modprobe search from the default place: /lib/modules/<your kernel verision>/kernel/sound/ (don't forget to rerun /sbin/depmod after removing the old sound directory. Eg: /sbin/depmod -a 2.6.24-24-server).
./configure --with-redhat=no \ --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer \ --with-card-options=all make && make install
After the first make && make install, copy mod_skypopen/configs/alsa/dummy.c to alsa-driver-1.0.20sound/drivers/dummy.c .
make && make install #again :)
The problem is after I did all of them, when I entered modprobe snd_dummy, it always crashed and returned as "killed" on my terminal, I could see it dumped out a huge block or data(numbers, etc) on the host but don't understand the meaning. While if I used the original dummy.c inside alsa-driver-1.0.20, it worked fine. Besides, the default ubuntu installation doesn't include kernal dev and source, so I did one more step(or it cannot build alsa).
Did anyone try the same and get it working?
Thanks! Jian
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, I tried real machine. Got different error: FATAL: Error inserting snd_dummy(/lib/modules/2.6.24-26-server/kernel/sound/drivers/snd-dummy.ko): Unknown symbol in module, or unknown parameter (see demsg). Then if I type demsg, got the attached screen. Please help. Thanks! On Fri, Oct 22, 2010 at 11:33 AM, Jian Ren <renjian@gmail.com> wrote:
Tried under VMPlayer, got the same problem, will try real machine later. Attached is the screen shot.
Thanks! Jian
On Thu, Oct 21, 2010 at 4:45 PM, Giovanni Maruzzelli <gmaruzz@gmail.com>wrote:
Maybe is a problem with virtualbox. Also, is known that fs+mod_skypopen+skype clients does not works in virtualbox.
Try it on a real (hardware) machine.
Or (but is less popular) in a xen like virtual machine.
-giovanni
On Thu, Oct 21, 2010 at 4:21 PM, Jian Ren <renjian@gmail.com> wrote:
Hi, I am trying to follow this wiki: http://wiki.freeswitch.org/wiki/Skypiax_Skype_Endpoint_and_Trunk to setup FS and Skypopen on Ubuntu 8.04(64bit server inside virualbox).
There is one step asks me to build snd_dummy:
http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#ALSA_and_t...
The section is like below:
Ubuntu, Debian
Note, Ubuntu may have alsa sound drivers installed at /lib/modules/<your kernel version>/ubuntu/sound/..., you may need to remove the dir to allow modprobe search from the default place: /lib/modules/<your kernel verision>/kernel/sound/ (don't forget to rerun /sbin/depmod after removing the old sound directory. Eg: /sbin/depmod -a 2.6.24-24-server).
./configure --with-redhat=no \ --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer \ --with-card-options=all make && make install
After the first make && make install, copy mod_skypopen/configs/alsa/dummy.c to alsa-driver-1.0.20sound/drivers/dummy.c .
make && make install #again :)
The problem is after I did all of them, when I entered modprobe snd_dummy, it always crashed and returned as "killed" on my terminal, I could see it dumped out a huge block or data(numbers, etc) on the host but don't understand the meaning. While if I used the original dummy.c inside alsa-driver-1.0.20, it worked fine. Besides, the default ubuntu installation doesn't include kernal dev and source, so I did one more step(or it cannot build alsa).
Did anyone try the same and get it working?
Thanks! Jian
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Ok, I found out the new error was caused by missing of 32bit compatibility libraries, after I ran this: apt-get -y install ia32-libs lib32asound2 libc6-i386 lib32gcc1 \ lib32stdc++6 lib32ncurses5 lib32z1 Now I am getting exactly the same problem as if under virtualBox or VMPlayer. So it's not a VM problem. Please help! Thanks! Jian On Sat, Oct 23, 2010 at 10:19 PM, Jian Ren <renjian@gmail.com> wrote:
Hi, I tried real machine. Got different error: FATAL: Error inserting snd_dummy(/lib/modules/2.6.24-26-server/kernel/sound/drivers/snd-dummy.ko): Unknown symbol in module, or unknown parameter (see demsg). Then if I type demsg, got the attached screen. Please help.
Thanks!
On Fri, Oct 22, 2010 at 11:33 AM, Jian Ren <renjian@gmail.com> wrote:
Tried under VMPlayer, got the same problem, will try real machine later. Attached is the screen shot.
Thanks! Jian
On Thu, Oct 21, 2010 at 4:45 PM, Giovanni Maruzzelli <gmaruzz@gmail.com>wrote:
Maybe is a problem with virtualbox. Also, is known that fs+mod_skypopen+skype clients does not works in virtualbox.
Try it on a real (hardware) machine.
Or (but is less popular) in a xen like virtual machine.
-giovanni
On Thu, Oct 21, 2010 at 4:21 PM, Jian Ren <renjian@gmail.com> wrote:
Hi, I am trying to follow this wiki: http://wiki.freeswitch.org/wiki/Skypiax_Skype_Endpoint_and_Trunk to setup FS and Skypopen on Ubuntu 8.04(64bit server inside virualbox).
There is one step asks me to build snd_dummy:
http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#ALSA_and_t...
The section is like below:
Ubuntu, Debian
Note, Ubuntu may have alsa sound drivers installed at /lib/modules/<your kernel version>/ubuntu/sound/..., you may need to remove the dir to allow modprobe search from the default place: /lib/modules/<your kernel verision>/kernel/sound/ (don't forget to rerun /sbin/depmod after removing the old sound directory. Eg: /sbin/depmod -a 2.6.24-24-server).
./configure --with-redhat=no \ --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer \ --with-card-options=all make && make install
After the first make && make install, copy mod_skypopen/configs/alsa/dummy.c to alsa-driver-1.0.20sound/drivers/dummy.c .
make && make install #again :)
The problem is after I did all of them, when I entered modprobe snd_dummy, it always crashed and returned as "killed" on my terminal, I could see it dumped out a huge block or data(numbers, etc) on the host but don't understand the meaning. While if I used the original dummy.c inside alsa-driver-1.0.20, it worked fine. Besides, the default ubuntu installation doesn't include kernal dev and source, so I did one more step(or it cannot build alsa).
Did anyone try the same and get it working?
Thanks! Jian
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Sun, Oct 24, 2010 at 11:28 PM, Jian Ren <renjian@gmail.com> wrote:
Ok, I found out the new error was caused by missing of 32bit compatibility libraries, after I ran this:
apt-get -y install ia32-libs lib32asound2 libc6-i386 lib32gcc1 \ lib32stdc++6 lib32ncurses5 lib32z1
Btw, in the wiki is written about the 32bit libraries. If you follow the wiki, it works. I've done that many times. After you have installed ALSA, you need to reboot the machine, or to rmmod all the snd* modules from the kernel, before to modprobe snd-dummy -giovanni
Now I am getting exactly the same problem as if under virtualBox or VMPlayer. So it's not a VM problem. Please help! Thanks! Jian
On Sat, Oct 23, 2010 at 10:19 PM, Jian Ren <renjian@gmail.com> wrote:
Hi, I tried real machine. Got different error: FATAL: Error inserting snd_dummy(/lib/modules/2.6.24-26-server/kernel/sound/drivers/snd-dummy.ko): Unknown symbol in module, or unknown parameter (see demsg). Then if I type demsg, got the attached screen. Please help. Thanks!
On Fri, Oct 22, 2010 at 11:33 AM, Jian Ren <renjian@gmail.com> wrote:
Tried under VMPlayer, got the same problem, will try real machine later. Attached is the screen shot.
Thanks! Jian
On Thu, Oct 21, 2010 at 4:45 PM, Giovanni Maruzzelli <gmaruzz@gmail.com> wrote:
Maybe is a problem with virtualbox. Also, is known that fs+mod_skypopen+skype clients does not works in virtualbox.
Try it on a real (hardware) machine.
Or (but is less popular) in a xen like virtual machine.
-giovanni
On Thu, Oct 21, 2010 at 4:21 PM, Jian Ren <renjian@gmail.com> wrote:
Hi, I am trying to follow this wiki: http://wiki.freeswitch.org/wiki/Skypiax_Skype_Endpoint_and_Trunk to setup FS and Skypopen on Ubuntu 8.04(64bit server inside virualbox).
There is one step asks me to build snd_dummy:
http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#ALSA_and_t... The section is like below:
Ubuntu, Debian
Note, Ubuntu may have alsa sound drivers installed at /lib/modules/<your kernel version>/ubuntu/sound/..., you may need to remove the dir to allow modprobe search from the default place: /lib/modules/<your kernel verision>/kernel/sound/ (don't forget to rerun /sbin/depmod after removing the old sound directory. Eg: /sbin/depmod -a 2.6.24-24-server).
./configure --with-redhat=no \ --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer \ --with-card-options=all make && make install
After the first make && make install, copy mod_skypopen/configs/alsa/dummy.c to alsa-driver-1.0.20sound/drivers/dummy.c .
make && make install #again :)
The problem is after I did all of them, when I entered modprobe snd_dummy, it always crashed and returned as "killed" on my terminal, I could see it dumped out a huge block or data(numbers, etc) on the host but don't understand the meaning. While if I used the original dummy.c inside alsa-driver-1.0.20, it worked fine. Besides, the default ubuntu installation doesn't include kernal dev and source, so I did one more step(or it cannot build alsa).
Did anyone try the same and get it working?
Thanks! Jian
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
On Sun, Oct 24, 2010 at 11:32 PM, Giovanni Maruzzelli <gmaruzz@gmail.com> wrote:
After you have installed ALSA, you need to reboot the machine, or to rmmod all the snd* modules from the kernel, before to modprobe snd-dummy
Hello Jian, I can assure you that the process works, many many people do it and works. So, we need to find the error. 1) are you sure you have moved away the correct sound modules directory? check with "uname -a" to know which kernel are you using, and then move away the sound directory under the correct kernel directory (you may have more than one kernel and modules installed) 2) you really have to move that directory away, not rename it in place 3) are you sure the ALSA drivers were correctly maked and installed? Also, don't do the depmod on the command line if you are unsure you are using the correct kernel in command line (make install will do the depmod for you, the second one is just a little redundant) 4) if still fails to modprobe: a) find all the sound directories under the kernel you are actually using and move them away or delete them b) delete the /usr/src/alsa-drivers directory c) do the tar xjf again on the alsa-driver archive you downloaded d) do configure - make - make install - overwrite the dummy.c with my dummy.c - make - make install e) reboot f) modprobe snd-dummy Let me know how it goes. -giovanni
Now I am getting exactly the same problem as if under virtualBox or VMPlayer. So it's not a VM problem. Please help! Thanks! Jian
On Sat, Oct 23, 2010 at 10:19 PM, Jian Ren <renjian@gmail.com> wrote:
Hi, I tried real machine. Got different error: FATAL: Error inserting snd_dummy(/lib/modules/2.6.24-26-server/kernel/sound/drivers/snd-dummy.ko): Unknown symbol in module, or unknown parameter (see demsg). Then if I type demsg, got the attached screen. Please help. Thanks!
On Fri, Oct 22, 2010 at 11:33 AM, Jian Ren <renjian@gmail.com> wrote:
Tried under VMPlayer, got the same problem, will try real machine later. Attached is the screen shot.
Thanks! Jian
On Thu, Oct 21, 2010 at 4:45 PM, Giovanni Maruzzelli <gmaruzz@gmail.com> wrote:
Maybe is a problem with virtualbox. Also, is known that fs+mod_skypopen+skype clients does not works in virtualbox.
Try it on a real (hardware) machine.
Or (but is less popular) in a xen like virtual machine.
-giovanni
On Thu, Oct 21, 2010 at 4:21 PM, Jian Ren <renjian@gmail.com> wrote:
Hi, I am trying to follow this wiki: http://wiki.freeswitch.org/wiki/Skypiax_Skype_Endpoint_and_Trunk to setup FS and Skypopen on Ubuntu 8.04(64bit server inside virualbox).
There is one step asks me to build snd_dummy:
http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#ALSA_and_t... The section is like below:
Ubuntu, Debian
Note, Ubuntu may have alsa sound drivers installed at /lib/modules/<your kernel version>/ubuntu/sound/..., you may need to remove the dir to allow modprobe search from the default place: /lib/modules/<your kernel verision>/kernel/sound/ (don't forget to rerun /sbin/depmod after removing the old sound directory. Eg: /sbin/depmod -a 2.6.24-24-server).
./configure --with-redhat=no \ --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer \ --with-card-options=all make && make install
After the first make && make install, copy mod_skypopen/configs/alsa/dummy.c to alsa-driver-1.0.20sound/drivers/dummy.c .
make && make install #again :)
The problem is after I did all of them, when I entered modprobe snd_dummy, it always crashed and returned as "killed" on my terminal, I could see it dumped out a huge block or data(numbers, etc) on the host but don't understand the meaning. While if I used the original dummy.c inside alsa-driver-1.0.20, it worked fine. Besides, the default ubuntu installation doesn't include kernal dev and source, so I did one more step(or it cannot build alsa).
Did anyone try the same and get it working?
Thanks! Jian
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
Problem found and solved. There are two dummy.c under alsa-driver-1.0.20, I overwrote the one under drivers, which is the wrong one. Based on the wiki, it should be the one under alsa-driver-1.0.20/sound/drivers. Besides, I need to reboot after rebuilding the new dummy.c. Thank Giovanni for helping me out. Jian On Sun, Oct 24, 2010 at 5:32 PM, Giovanni Maruzzelli <gmaruzz@gmail.com>wrote:
On Sun, Oct 24, 2010 at 11:28 PM, Jian Ren <renjian@gmail.com> wrote:
Ok, I found out the new error was caused by missing of 32bit compatibility libraries, after I ran this:
apt-get -y install ia32-libs lib32asound2 libc6-i386 lib32gcc1 \ lib32stdc++6 lib32ncurses5 lib32z1
Btw, in the wiki is written about the 32bit libraries.
If you follow the wiki, it works. I've done that many times.
After you have installed ALSA, you need to reboot the machine, or to rmmod all the snd* modules from the kernel, before to modprobe snd-dummy
-giovanni
Now I am getting exactly the same problem as if under virtualBox or VMPlayer. So it's not a VM problem. Please help! Thanks! Jian
On Sat, Oct 23, 2010 at 10:19 PM, Jian Ren <renjian@gmail.com> wrote:
Hi, I tried real machine. Got different error: FATAL: Error inserting
snd_dummy(/lib/modules/2.6.24-26-server/kernel/sound/drivers/snd-dummy.ko):
Unknown symbol in module, or unknown parameter (see demsg). Then if I type demsg, got the attached screen. Please help. Thanks!
On Fri, Oct 22, 2010 at 11:33 AM, Jian Ren <renjian@gmail.com> wrote:
Tried under VMPlayer, got the same problem, will try real machine
later.
Attached is the screen shot.
Thanks! Jian
On Thu, Oct 21, 2010 at 4:45 PM, Giovanni Maruzzelli < gmaruzz@gmail.com> wrote:
Maybe is a problem with virtualbox. Also, is known that fs+mod_skypopen+skype clients does not works in virtualbox.
Try it on a real (hardware) machine.
Or (but is less popular) in a xen like virtual machine.
-giovanni
On Thu, Oct 21, 2010 at 4:21 PM, Jian Ren <renjian@gmail.com> wrote:
Hi, I am trying to follow this wiki: http://wiki.freeswitch.org/wiki/Skypiax_Skype_Endpoint_and_Trunk to setup FS and Skypopen on Ubuntu 8.04(64bit server inside virualbox).
There is one step asks me to build snd_dummy:
http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#ALSA_and_t...
The section is like below:
Ubuntu, Debian
Note, Ubuntu may have alsa sound drivers installed at /lib/modules/<your kernel version>/ubuntu/sound/..., you may need to remove the dir to allow modprobe search from the default place: /lib/modules/<your kernel verision>/kernel/sound/ (don't forget to rerun /sbin/depmod after removing the old sound directory. Eg: /sbin/depmod -a 2.6.24-24-server).
./configure --with-redhat=no \ --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer \ --with-card-options=all make && make install
After the first make && make install, copy mod_skypopen/configs/alsa/dummy.c to alsa-driver-1.0.20sound/drivers/dummy.c .
make && make install #again :)
The problem is after I did all of them, when I entered modprobe snd_dummy, it always crashed and returned as "killed" on my terminal, I could see it dumped out a huge block or data(numbers, etc) on the host but don't understand the meaning. While if I used the original dummy.c inside alsa-driver-1.0.20, it worked fine. Besides, the default ubuntu installation doesn't include kernal dev and source, so I did one more step(or it cannot build alsa).
Did anyone try the same and get it working?
Thanks! Jian
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
participants (2)
-
Giovanni Maruzzelli
-
Jian Ren