Hello I solved the nobody problem after setting the following param: <action application="set" data="sip_h_referred-by=${sip_from_user}@ ${sip_from_host}"/> We are using proxy-refer param because with proxy-refer each leg of the transfer has different callid. With different callids its easier to manage legs and its also good for billing. But my other question is still valid. Is it a good idea to use proxy-refer like this in a single Freeswitch setup. Thanks Huseyin On Thu, Sep 17, 2015 at 9:29 AM, huseyin kalyoncu <hkalyoncu@gmail.com> wrote:

Hello

Let me ask another one. Is it a good idea to use proxy-refer param in a single freeswitch setup environment?

Thanks

huseyin

On Wed, Sep 16, 2015 at 8:43 PM, huseyin kalyoncu <hkalyoncu@gmail.com> wrote:

...

Hello,

When i set proxy-refer=true on the sip profile;

Attended & blind transfers from uas to Freeswitch show strange debug outputs like this:

[DEBUG] sofia.c:8848 sofia/main/nobody@freeswitch_ip receiving invite from proxy_ip:5060 version: 1.4.20 64bit

Freeswitch shows transfer target as nobody on all incoming transfers. But when i check with tcpdump, i see all Invite (also Refer) packets have correct from & to fields. Is this normal behaviour or do i have a config problem?

007 calls 009, then 009 calls 002 and makes a attended transfer. All bridging done on Freeswitch. Call is successful but Freeswitch shows empty user for transfer target in the cdr:

from to calltime reason "009","002","2015-09-16 16:40:28","PICKED_OFF" "007","009","2015-09-16 16:40:16","NORMAL_CLEARING" "009","","2015-09-16 16:40:38","NORMAL_CLEARING"

Freeswitch version 1.4.20 running on debian jessie.

Thanks

Huseyin