I git cloned libyuv from the FreeSWITCH repos into OS X. The official libyuv google doc states I need the google chromium utilities. But searching the web I see FreeSWITCH folks are just using “make”. There is no configure file but make seems to work. But make install fails since it does not know the target directories. The question is: Do I need the chromium utilities to build the FreeSWITCH libyuv version or can I just use make/make install and how to specify targets. I know it’s OS X (BSD) but Linux should be close enough. Thanks, Mario G
You don't need the utilities, I'm going to have to go through and figure out what all i needed to do manually and how I did it and write it up for you... I'll try to do this soon.
On Oct 8, 2015, at 2:44 PM, Mario <mario_fs@mgtech.com> wrote:
I git cloned libyuv from the FreeSWITCH repos into OS X. The official libyuv google doc states I need the google chromium utilities. But searching the web I see FreeSWITCH folks are just using “make”. There is no configure file but make seems to work. But make install fails since it does not know the target directories. The question is:
Do I need the chromium utilities to build the FreeSWITCH libyuv version or can I just use make/make install and how to specify targets. I know it’s OS X (BSD) but Linux should be close enough. Thanks, Mario G _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks I look forward to it since I am closer to 1.6! Mario G
On Oct 8, 2015, at 12:50 PM, Michael Jerris <mike@jerris.com> wrote:
You don't need the utilities, I'm going to have to go through and figure out what all i needed to do manually and how I did it and write it up for you... I'll try to do this soon.
On Oct 8, 2015, at 2:44 PM, Mario <mario_fs@mgtech.com> wrote:
I git cloned libyuv from the FreeSWITCH repos into OS X. The official libyuv google doc states I need the google chromium utilities. But searching the web I see FreeSWITCH folks are just using “make”. There is no configure file but make seems to work. But make install fails since it does not know the target directories. The question is:
Do I need the chromium utilities to build the FreeSWITCH libyuv version or can I just use make/make install and how to specify targets. I know it’s OS X (BSD) but Linux should be close enough. Thanks, Mario G _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
https://hub.docker.com/r/bettervoice/freeswitch-container/ Thomas Quintana Chief Technology Officer Phone: 1 (512) 677-6200 Website: http://www.bettervoice.com On Thu, Oct 8, 2015 at 3:54 PM, Mario <mario_fs@mgtech.com> wrote:
Thanks I look forward to it since I am closer to 1.6! Mario G
On Oct 8, 2015, at 12:50 PM, Michael Jerris <mike@jerris.com> wrote:
You don't need the utilities, I'm going to have to go through and figure out what all i needed to do manually and how I did it and write it up for you... I'll try to do this soon.
On Oct 8, 2015, at 2:44 PM, Mario <mario_fs@mgtech.com> wrote:
I git cloned libyuv from the FreeSWITCH repos into OS X. The official libyuv google doc states I need the google chromium utilities. But searching the web I see FreeSWITCH folks are just using “make”. There is no configure file but make seems to work. But make install fails since it does not know the target directories. The question is:
Do I need the chromium utilities to build the FreeSWITCH libyuv version or can I just use make/make install and how to specify targets. I know it’s OS X (BSD) but Linux should be close enough. Thanks, Mario G
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
what does this have to do with this thread? On Thursday, October 8, 2015, Thomas Quintana <thomas@bettervoice.com> wrote:
https://hub.docker.com/r/bettervoice/freeswitch-container/
Thomas Quintana Chief Technology Officer Phone: 1 (512) 677-6200 Website: http://www.bettervoice.com
On Thu, Oct 8, 2015 at 3:54 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote:
Thanks I look forward to it since I am closer to 1.6! Mario G
On Oct 8, 2015, at 12:50 PM, Michael Jerris <mike@jerris.com <javascript:_e(%7B%7D,'cvml','mike@jerris.com');>> wrote:
You don't need the utilities, I'm going to have to go through and figure out what all i needed to do manually and how I did it and write it up for you... I'll try to do this soon.
On Oct 8, 2015, at 2:44 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote:
I git cloned libyuv from the FreeSWITCH repos into OS X. The official libyuv google doc states I need the google chromium utilities. But searching the web I see FreeSWITCH folks are just using “make”. There is no configure file but make seems to work. But make install fails since it does not know the target directories. The question is:
Do I need the chromium utilities to build the FreeSWITCH libyuv version or can I just use make/make install and how to specify targets. I know it’s OS X (BSD) but Linux should be close enough. Thanks, Mario G
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it.
On Oct 8, 2015, at 6:31 PM, Michael Jerris <mike@jerris.com> wrote:
what does this have to do with this thread?
On Thursday, October 8, 2015, Thomas Quintana <thomas@bettervoice.com <mailto:thomas@bettervoice.com>> wrote: https://hub.docker.com/r/bettervoice/freeswitch-container/ <https://hub.docker.com/r/bettervoice/freeswitch-container/>
Thomas Quintana Chief Technology Officer Phone: 1 (512) 677-6200 Website: http://www.bettervoice.com <http://www.bettervoice.com/>
On Thu, Oct 8, 2015 at 3:54 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote: Thanks I look forward to it since I am closer to 1.6! Mario G
On Oct 8, 2015, at 12:50 PM, Michael Jerris <mike@jerris.com <javascript:_e(%7B%7D,'cvml','mike@jerris.com');>> wrote:
You don't need the utilities, I'm going to have to go through and figure out what all i needed to do manually and how I did it and write it up for you... I'll try to do this soon.
On Oct 8, 2015, at 2:44 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote:
I git cloned libyuv from the FreeSWITCH repos into OS X. The official libyuv google doc states I need the google chromium utilities. But searching the web I see FreeSWITCH folks are just using “make”. There is no configure file but make seems to work. But make install fails since it does not know the target directories. The question is:
Do I need the chromium utilities to build the FreeSWITCH libyuv version or can I just use make/make install and how to specify targets. I know it’s OS X (BSD) but Linux should be close enough. Thanks, Mario G _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git 510 cd libyuv 512 make 514 sudo make install just did on my machine and it worked fine?
On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com> wrote:
I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it.
On Oct 8, 2015, at 6:31 PM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
what does this have to do with this thread?
On Thursday, October 8, 2015, Thomas Quintana <thomas@bettervoice.com <mailto:thomas@bettervoice.com>> wrote: https://hub.docker.com/r/bettervoice/freeswitch-container/ <https://hub.docker.com/r/bettervoice/freeswitch-container/>
Thomas Quintana Chief Technology Officer Phone: 1 (512) 677-6200 Website: http://www.bettervoice.com <http://www.bettervoice.com/>
On Thu, Oct 8, 2015 at 3:54 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote: Thanks I look forward to it since I am closer to 1.6! Mario G
On Oct 8, 2015, at 12:50 PM, Michael Jerris <mike@jerris.com <javascript:_e(%7B%7D,'cvml','mike@jerris.com');>> wrote:
You don't need the utilities, I'm going to have to go through and figure out what all i needed to do manually and how I did it and write it up for you... I'll try to do this soon.
On Oct 8, 2015, at 2:44 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote:
I git cloned libyuv from the FreeSWITCH repos into OS X. The official libyuv google doc states I need the google chromium utilities. But searching the web I see FreeSWITCH folks are just using “make”. There is no configure file but make seems to work. But make install fails since it does not know the target directories. The question is:
Do I need the chromium utilities to build the FreeSWITCH libyuv version or can I just use make/make install and how to specify targets. I know it’s OS X (BSD) but Linux should be close enough. Thanks, Mario G _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula. I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further.
On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com> wrote:
509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> 510 cd libyuv 512 make 514 sudo make install
just did on my machine and it worked fine?
On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it.
On Oct 8, 2015, at 6:31 PM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
what does this have to do with this thread?
On Thursday, October 8, 2015, Thomas Quintana <thomas@bettervoice.com <mailto:thomas@bettervoice.com>> wrote: https://hub.docker.com/r/bettervoice/freeswitch-container/ <https://hub.docker.com/r/bettervoice/freeswitch-container/>
Thomas Quintana Chief Technology Officer Phone: 1 (512) 677-6200 Website: http://www.bettervoice.com <http://www.bettervoice.com/>
On Thu, Oct 8, 2015 at 3:54 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote: Thanks I look forward to it since I am closer to 1.6! Mario G
On Oct 8, 2015, at 12:50 PM, Michael Jerris <mike@jerris.com <javascript:_e(%7B%7D,'cvml','mike@jerris.com');>> wrote:
You don't need the utilities, I'm going to have to go through and figure out what all i needed to do manually and how I did it and write it up for you... I'll try to do this soon.
On Oct 8, 2015, at 2:44 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote:
I git cloned libyuv from the FreeSWITCH repos into OS X. The official libyuv google doc states I need the google chromium utilities. But searching the web I see FreeSWITCH folks are just using “make”. There is no configure file but make seems to work. But make install fails since it does not know the target directories. The question is:
Do I need the chromium utilities to build the FreeSWITCH libyuv version or can I just use make/make install and how to specify targets. I know it’s OS X (BSD) but Linux should be close enough. Thanks, Mario G _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
not sure what you mean by the one in support lib. If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file
On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com> wrote:
Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula.
I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further.
On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> 510 cd libyuv 512 make 514 sudo make install
just did on my machine and it worked fine?
On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it.
On Oct 8, 2015, at 6:31 PM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
what does this have to do with this thread?
On Thursday, October 8, 2015, Thomas Quintana <thomas@bettervoice.com <mailto:thomas@bettervoice.com>> wrote: https://hub.docker.com/r/bettervoice/freeswitch-container/ <https://hub.docker.com/r/bettervoice/freeswitch-container/>
Thomas Quintana Chief Technology Officer Phone: 1 (512) 677-6200 Website: http://www.bettervoice.com <http://www.bettervoice.com/>
On Thu, Oct 8, 2015 at 3:54 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote: Thanks I look forward to it since I am closer to 1.6! Mario G
On Oct 8, 2015, at 12:50 PM, Michael Jerris <mike@jerris.com <javascript:_e(%7B%7D,'cvml','mike@jerris.com');>> wrote:
You don't need the utilities, I'm going to have to go through and figure out what all i needed to do manually and how I did it and write it up for you... I'll try to do this soon.
On Oct 8, 2015, at 2:44 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote:
I git cloned libyuv from the FreeSWITCH repos into OS X. The official libyuv google doc states I need the google chromium utilities. But searching the web I see FreeSWITCH folks are just using “make”. There is no configure file but make seems to work. But make install fails since it does not know the target directories. The question is:
Do I need the chromium utilities to build the FreeSWITCH libyuv version or can I just use make/make install and how to specify targets. I know it’s OS X (BSD) but Linux should be close enough. Thanks, Mario G _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git? I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv.
On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com> wrote:
not sure what you mean by the one in support lib.
If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file
On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula.
I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further.
On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> 510 cd libyuv 512 make 514 sudo make install
just did on my machine and it worked fine?
On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it.
On Oct 8, 2015, at 6:31 PM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
what does this have to do with this thread?
On Thursday, October 8, 2015, Thomas Quintana <thomas@bettervoice.com <mailto:thomas@bettervoice.com>> wrote: https://hub.docker.com/r/bettervoice/freeswitch-container/ <https://hub.docker.com/r/bettervoice/freeswitch-container/>
Thomas Quintana Chief Technology Officer Phone: 1 (512) 677-6200 Website: http://www.bettervoice.com <http://www.bettervoice.com/>
On Thu, Oct 8, 2015 at 3:54 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote: Thanks I look forward to it since I am closer to 1.6! Mario G
On Oct 8, 2015, at 12:50 PM, Michael Jerris <mike@jerris.com <javascript:_e(%7B%7D,'cvml','mike@jerris.com');>> wrote:
You don't need the utilities, I'm going to have to go through and figure out what all i needed to do manually and how I did it and write it up for you... I'll try to do this soon.
> On Oct 8, 2015, at 2:44 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote: > > I git cloned libyuv from the FreeSWITCH repos into OS X. The official libyuv google doc states I need the google chromium utilities. But searching the web I see FreeSWITCH folks are just using “make”. There is no configure file but make seems to work. But make install fails since it does not know the target directories. The question is: > > Do I need the chromium utilities to build the FreeSWITCH libyuv version or can I just use make/make install and how to specify targets. I know it’s OS X (BSD) but Linux should be close enough. Thanks, > Mario G > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> > http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> > > Official FreeSWITCH Sites > http://www.freeswitch.org <http://www.freeswitch.org/> > http://confluence.freeswitch.org <http://confluence.freeswitch.org/> > http://www.cluecon.com <http://www.cluecon.com/> > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> > http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com> wrote:
What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git? <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?> These are the same, just one has my user id in the url
I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv.
You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that.
On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
not sure what you mean by the one in support lib.
If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file
On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula.
I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further.
On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> 510 cd libyuv 512 make 514 sudo make install
just did on my machine and it worked fine?
On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it.
FINALLY! I got libyuv installed into /usr/local, also flite, libvpx, and opus. And lua and libsndfile from homebrew. Freeswitch 1.7 master built and came up! BTW, the previous problem I had was dumb, I had to do a new git clone of FS and it found libyuv in /usr/local. Thanks for the guidance! Now for thorough testing then updating the Applescript FS installer and wiki pages. Mario G
On Oct 13, 2015, at 2:58 PM, Michael Jerris <mike@jerris.com> wrote:
On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git? <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?> These are the same, just one has my user id in the url
I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv.
You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that.
On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
not sure what you mean by the one in support lib.
If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file
On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula.
I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further.
On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> 510 cd libyuv 512 make 514 sudo make install
just did on my machine and it worked fine?
On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Does homebrew use /usr/local ? I thought they had their own lib prefix that we could make a recope for and install it there by their policy so the eventual fs hombrew package would just fit in. On Tuesday, October 13, 2015, Mario <mario_fs@mgtech.com> wrote:
FINALLY! I got libyuv installed into /usr/local, also flite, libvpx, and opus. And lua and libsndfile from homebrew. Freeswitch 1.7 master built and came up! BTW, the previous problem I had was dumb, I had to do a new git clone of FS and it found libyuv in /usr/local.
Thanks for the guidance! Now for thorough testing then updating the Applescript FS installer and wiki pages. Mario G
On Oct 13, 2015, at 2:58 PM, Michael Jerris <mike@jerris.com <javascript:_e(%7B%7D,'cvml','mike@jerris.com');>> wrote:
On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote:
What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?
These are the same, just one has my user id in the url
I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv.
You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that.
On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com <javascript:_e(%7B%7D,'cvml','mike@jerris.com');>> wrote:
not sure what you mean by the one in support lib.
If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file
On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote:
Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula.
I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further.
On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <javascript:_e(%7B%7D,'cvml','mike@jerris.com');>> wrote:
509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git 510 cd libyuv 512 make 514 sudo make install
just did on my machine and it worked fine?
On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <javascript:_e(%7B%7D,'cvml','mario_fs@mgtech.com');>> wrote:
I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ ☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>* ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900 https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA
Homebrew puts everything in /usr/local. In fact, if you follow the wiki you can actually delete the whole /usr/local to remove everything except Xcode and start over again since /usr/local is not used by OS X. I would like to make a homebrew formula called freeswitch-support which would install all prereqs. This would allow anyone to later install whatever version of FS they want. Then, it would be simple to add a freeswitch formula (which I see someone already started) that would simply invoked freeswitch-support and install the current production version. I am stumbling learning hombrew formulas but hope to I can figure them out. BTW, I am updating the wiki today for 1.6, working in the Applescript installer right now. Mario G
On Oct 13, 2015, at 10:20 PM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
Does homebrew use /usr/local ? I thought they had their own lib prefix that we could make a recope for and install it there by their policy so the eventual fs hombrew package would just fit in.
On Tuesday, October 13, 2015, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote: FINALLY! I got libyuv installed into /usr/local, also flite, libvpx, and opus. And lua and libsndfile from homebrew. Freeswitch 1.7 master built and came up! BTW, the previous problem I had was dumb, I had to do a new git clone of FS and it found libyuv in /usr/local.
Thanks for the guidance! Now for thorough testing then updating the Applescript FS installer and wiki pages. Mario G
On Oct 13, 2015, at 2:58 PM, Michael Jerris <mike@jerris.com <>> wrote:
On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com <>> wrote:
What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git? <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?> These are the same, just one has my user id in the url
I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in <http://pc.in/> files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv.
You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that.
On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com <>> wrote:
not sure what you mean by the one in support lib.
If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file
On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <>> wrote:
Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula.
I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further.
On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <>> wrote:
509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> 510 cd libyuv 512 make 514 sudo make install
just did on my machine and it worked fine?
> On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <>> wrote: > > I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it. >
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
If you look at the top of the Makefile in libyuv: PREFIX:=/usr EXEC_PREFIX:=$(PREFIX) LIBDIR:=$(PREFIX)/lib/ INCDIR:=$(PREFIX)/include/ you can override these on the make line: PREFIX=/usr/local make install <--- something like this... this should allow you to make a homebrew recipe without having to patch anything
On Oct 14, 2015, at 12:40 PM, Mario G <mario_fs@mgtech.com> wrote:
Homebrew puts everything in /usr/local. In fact, if you follow the wiki you can actually delete the whole /usr/local to remove everything except Xcode and start over again since /usr/local is not used by OS X.
I would like to make a homebrew formula called freeswitch-support which would install all prereqs. This would allow anyone to later install whatever version of FS they want. Then, it would be simple to add a freeswitch formula (which I see someone already started) that would simply invoked freeswitch-support and install the current production version. I am stumbling learning hombrew formulas but hope to I can figure them out.
BTW, I am updating the wiki today for 1.6, working in the Applescript installer right now. Mario G
On Oct 13, 2015, at 10:20 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote:
Does homebrew use /usr/local ? I thought they had their own lib prefix that we could make a recope for and install it there by their policy so the eventual fs hombrew package would just fit in.
On Tuesday, October 13, 2015, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote: FINALLY! I got libyuv installed into /usr/local, also flite, libvpx, and opus. And lua and libsndfile from homebrew. Freeswitch 1.7 master built and came up! BTW, the previous problem I had was dumb, I had to do a new git clone of FS and it found libyuv in /usr/local.
Thanks for the guidance! Now for thorough testing then updating the Applescript FS installer and wiki pages. Mario G
On Oct 13, 2015, at 2:58 PM, Michael Jerris <mike@jerris.com <>> wrote:
On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com <>> wrote:
What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git? <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?> These are the same, just one has my user id in the url
I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in <http://pc.in/> files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv.
You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that.
On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com <>> wrote:
not sure what you mean by the one in support lib.
If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file
On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <>> wrote:
Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula.
I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further.
> On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <>> wrote: > > 509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> > 510 cd libyuv > 512 make > 514 sudo make install > > just did on my machine and it worked fine? > >> On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <>> wrote: >> >> I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it. >>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks, I tried that but there is a problem with the chmod commands at the bottom of makefile. I simply added perl commands to the Applescript Installer that modifies the makefile to remove the -m 755, etc. and it works fine so far. Right now, the Applescript installer is a way better method to install than homebrew.
On Oct 14, 2015, at 10:40 AM, Michael Jerris <mike@jerris.com> wrote:
If you look at the top of the Makefile in libyuv:
PREFIX:=/usr EXEC_PREFIX:=$(PREFIX) LIBDIR:=$(PREFIX)/lib/ INCDIR:=$(PREFIX)/include/
you can override these on the make line:
PREFIX=/usr/local make install <--- something like this...
this should allow you to make a homebrew recipe without having to patch anything
On Oct 14, 2015, at 12:40 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Homebrew puts everything in /usr/local. In fact, if you follow the wiki you can actually delete the whole /usr/local to remove everything except Xcode and start over again since /usr/local is not used by OS X.
I would like to make a homebrew formula called freeswitch-support which would install all prereqs. This would allow anyone to later install whatever version of FS they want. Then, it would be simple to add a freeswitch formula (which I see someone already started) that would simply invoked freeswitch-support and install the current production version. I am stumbling learning hombrew formulas but hope to I can figure them out.
BTW, I am updating the wiki today for 1.6, working in the Applescript installer right now. Mario G
On Oct 13, 2015, at 10:20 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote:
Does homebrew use /usr/local ? I thought they had their own lib prefix that we could make a recope for and install it there by their policy so the eventual fs hombrew package would just fit in.
On Tuesday, October 13, 2015, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote: FINALLY! I got libyuv installed into /usr/local, also flite, libvpx, and opus. And lua and libsndfile from homebrew. Freeswitch 1.7 master built and came up! BTW, the previous problem I had was dumb, I had to do a new git clone of FS and it found libyuv in /usr/local.
Thanks for the guidance! Now for thorough testing then updating the Applescript FS installer and wiki pages. Mario G
On Oct 13, 2015, at 2:58 PM, Michael Jerris <mike@jerris.com <>> wrote:
On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com <>> wrote:
What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git? <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?> These are the same, just one has my user id in the url
I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in <http://pc.in/> files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv.
You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that.
On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com <>> wrote:
not sure what you mean by the one in support lib.
If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file
> On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <>> wrote: > > Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula. > > I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further. > > >> On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <>> wrote: >> >> 509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> >> 510 cd libyuv >> 512 make >> 514 sudo make install >> >> just did on my machine and it worked fine? >> >>> On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <>> wrote: >>> >>> I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it. >>>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Get me the details of what commands failed so we can just fix the Makefile instead of hacking it during build.
On Oct 14, 2015, at 3:52 PM, Mario G <mario_fs@mgtech.com> wrote:
Thanks, I tried that but there is a problem with the chmod commands at the bottom of makefile. I simply added perl commands to the Applescript Installer that modifies the makefile to remove the -m 755, etc. and it works fine so far. Right now, the Applescript installer is a way better method to install than homebrew.
On Oct 14, 2015, at 10:40 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
If you look at the top of the Makefile in libyuv:
PREFIX:=/usr EXEC_PREFIX:=$(PREFIX) LIBDIR:=$(PREFIX)/lib/ INCDIR:=$(PREFIX)/include/
you can override these on the make line:
PREFIX=/usr/local make install <--- something like this...
this should allow you to make a homebrew recipe without having to patch anything
On Oct 14, 2015, at 12:40 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Homebrew puts everything in /usr/local. In fact, if you follow the wiki you can actually delete the whole /usr/local to remove everything except Xcode and start over again since /usr/local is not used by OS X.
I would like to make a homebrew formula called freeswitch-support which would install all prereqs. This would allow anyone to later install whatever version of FS they want. Then, it would be simple to add a freeswitch formula (which I see someone already started) that would simply invoked freeswitch-support and install the current production version. I am stumbling learning hombrew formulas but hope to I can figure them out.
BTW, I am updating the wiki today for 1.6, working in the Applescript installer right now. Mario G
On Oct 13, 2015, at 10:20 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote:
Does homebrew use /usr/local ? I thought they had their own lib prefix that we could make a recope for and install it there by their policy so the eventual fs hombrew package would just fit in.
On Tuesday, October 13, 2015, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote: FINALLY! I got libyuv installed into /usr/local, also flite, libvpx, and opus. And lua and libsndfile from homebrew. Freeswitch 1.7 master built and came up! BTW, the previous problem I had was dumb, I had to do a new git clone of FS and it found libyuv in /usr/local.
Thanks for the guidance! Now for thorough testing then updating the Applescript FS installer and wiki pages. Mario G
On Oct 13, 2015, at 2:58 PM, Michael Jerris <mike@jerris.com <>> wrote:
On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com <>> wrote:
What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git? <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?> These are the same, just one has my user id in the url
I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in <http://pc.in/> files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv.
You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that.
> On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com <>> wrote: > > not sure what you mean by the one in support lib. > > If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file > >> On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <>> wrote: >> >> Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula. >> >> I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further. >> >> >>> On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <>> wrote: >>> >>> 509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> >>> 510 cd libyuv >>> 512 make >>> 514 sudo make install >>> >>> just did on my machine and it worked fine? >>> >>>> On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <>> wrote: >>>> >>>> I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it. >>>>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
homebrew use /usr/local/Cellar/blah and link to /usr/local e.g. you can do brew link/unlink ffmpeg then it can be find or hiddend from the default place. On Thu, Oct 15, 2015 at 5:16 AM, Michael Jerris <mike@jerris.com> wrote:
Get me the details of what commands failed so we can just fix the Makefile instead of hacking it during build.
On Oct 14, 2015, at 3:52 PM, Mario G <mario_fs@mgtech.com> wrote:
Thanks, I tried that but there is a problem with the chmod commands at the bottom of makefile. I simply added perl commands to the Applescript Installer that modifies the makefile to remove the -m 755, etc. and it works fine so far. Right now, the Applescript installer is a way better method to install than homebrew.
On Oct 14, 2015, at 10:40 AM, Michael Jerris <mike@jerris.com> wrote:
If you look at the top of the Makefile in libyuv:
PREFIX:=/usr EXEC_PREFIX:=$(PREFIX) LIBDIR:=$(PREFIX)/lib/ INCDIR:=$(PREFIX)/include/
you can override these on the make line:
PREFIX=/usr/local make install <--- something like this...
this should allow you to make a homebrew recipe without having to patch anything
On Oct 14, 2015, at 12:40 PM, Mario G <mario_fs@mgtech.com> wrote:
Homebrew puts everything in /usr/local. In fact, if you follow the wiki you can actually delete the whole /usr/local to remove everything except Xcode and start over again since /usr/local is not used by OS X.
I would like to make a homebrew formula called freeswitch-support which would install all prereqs. This would allow anyone to later install whatever version of FS they want. Then, it would be simple to add a freeswitch formula (which I see someone already started) that would simply invoked freeswitch-support and install the current production version. I am stumbling learning hombrew formulas but hope to I can figure them out.
BTW, I am updating the wiki today for 1.6, working in the Applescript installer right now. Mario G
On Oct 13, 2015, at 10:20 PM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
Does homebrew use /usr/local ? I thought they had their own lib prefix that we could make a recope for and install it there by their policy so the eventual fs hombrew package would just fit in.
On Tuesday, October 13, 2015, Mario <mario_fs@mgtech.com> wrote:
FINALLY! I got libyuv installed into /usr/local, also flite, libvpx, and opus. And lua and libsndfile from homebrew. Freeswitch 1.7 master built and came up! BTW, the previous problem I had was dumb, I had to do a new git clone of FS and it found libyuv in /usr/local.
Thanks for the guidance! Now for thorough testing then updating the Applescript FS installer and wiki pages. Mario G
On Oct 13, 2015, at 2:58 PM, Michael Jerris <mike@jerris.com> wrote:
On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com> wrote:
What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?
These are the same, just one has my user id in the url
I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv.
You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that.
On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com> wrote:
not sure what you mean by the one in support lib.
If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file
On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com> wrote:
Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula.
I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further.
On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com> wrote:
509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git 510 cd libyuv 512 make 514 sudo make install
just did on my machine and it worked fine?
On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com> wrote:
I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>*
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900
https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- About: http://about.me/dujinfang Blog: http://www.dujinfang.com Proj: http://www.freeswitch.org.cn
The lines that failed are the ones with -755 and -644. My script works fine and just makes the 3 changes below. I documented it in the wiki but may simplify it further. Since it’s unique to OS X it should be fine. Especially if people use the script (which I plan to upload by this weekend after I handle nasm below). If it becomes easier I will update the wiki and script. 3 changes made to libyuv makefile: PREFIX from /usr to /usr/local Removes -m 755 in all lines Removes -m 644 in all lines BTW, LIBVPX needs an updated “nasm” on 10.9 and 10.10, not on 10.11. I added to the 10.9 wik (in progress)i but need to automate it in the installer script. Should be done by this weekend.
On Oct 14, 2015, at 2:16 PM, Michael Jerris <mike@jerris.com> wrote:
Get me the details of what commands failed so we can just fix the Makefile instead of hacking it during build.
On Oct 14, 2015, at 3:52 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Thanks, I tried that but there is a problem with the chmod commands at the bottom of makefile. I simply added perl commands to the Applescript Installer that modifies the makefile to remove the -m 755, etc. and it works fine so far. Right now, the Applescript installer is a way better method to install than homebrew.
On Oct 14, 2015, at 10:40 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
If you look at the top of the Makefile in libyuv:
PREFIX:=/usr EXEC_PREFIX:=$(PREFIX) LIBDIR:=$(PREFIX)/lib/ INCDIR:=$(PREFIX)/include/
you can override these on the make line:
PREFIX=/usr/local make install <--- something like this...
this should allow you to make a homebrew recipe without having to patch anything
On Oct 14, 2015, at 12:40 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Homebrew puts everything in /usr/local. In fact, if you follow the wiki you can actually delete the whole /usr/local to remove everything except Xcode and start over again since /usr/local is not used by OS X.
I would like to make a homebrew formula called freeswitch-support which would install all prereqs. This would allow anyone to later install whatever version of FS they want. Then, it would be simple to add a freeswitch formula (which I see someone already started) that would simply invoked freeswitch-support and install the current production version. I am stumbling learning hombrew formulas but hope to I can figure them out.
BTW, I am updating the wiki today for 1.6, working in the Applescript installer right now. Mario G
On Oct 13, 2015, at 10:20 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote:
Does homebrew use /usr/local ? I thought they had their own lib prefix that we could make a recope for and install it there by their policy so the eventual fs hombrew package would just fit in.
On Tuesday, October 13, 2015, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote: FINALLY! I got libyuv installed into /usr/local, also flite, libvpx, and opus. And lua and libsndfile from homebrew. Freeswitch 1.7 master built and came up! BTW, the previous problem I had was dumb, I had to do a new git clone of FS and it found libyuv in /usr/local.
Thanks for the guidance! Now for thorough testing then updating the Applescript FS installer and wiki pages. Mario G
On Oct 13, 2015, at 2:58 PM, Michael Jerris <mike@jerris.com <>> wrote:
> On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com <>> wrote: > > What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git? <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?> These are the same, just one has my user id in the url
> > I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in <http://pc.in/> files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv.
You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that.
> >> On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com <>> wrote: >> >> not sure what you mean by the one in support lib. >> >> If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file >> >>> On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <>> wrote: >>> >>> Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula. >>> >>> I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further. >>> >>> >>>> On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <>> wrote: >>>> >>>> 509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> >>>> 510 cd libyuv >>>> 512 make >>>> 514 sudo make install >>>> >>>> just did on my machine and it worked fine? >>>> >>>>> On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <>> wrote: >>>>> >>>>> I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it. >>>>>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
can you give me the exact command you run without modifying anything and the error you are getting please?
On Oct 15, 2015, at 1:41 PM, Mario G <mario_fs@mgtech.com> wrote:
The lines that failed are the ones with -755 and -644. My script works fine and just makes the 3 changes below. I documented it in the wiki but may simplify it further. Since it’s unique to OS X it should be fine. Especially if people use the script (which I plan to upload by this weekend after I handle nasm below). If it becomes easier I will update the wiki and script.
3 changes made to libyuv makefile: PREFIX from /usr to /usr/local Removes -m 755 in all lines Removes -m 644 in all lines
BTW, LIBVPX needs an updated “nasm” on 10.9 and 10.10, not on 10.11. I added to the 10.9 wik (in progress)i but need to automate it in the installer script. Should be done by this weekend.
On Oct 14, 2015, at 2:16 PM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
Get me the details of what commands failed so we can just fix the Makefile instead of hacking it during build.
On Oct 14, 2015, at 3:52 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Thanks, I tried that but there is a problem with the chmod commands at the bottom of makefile. I simply added perl commands to the Applescript Installer that modifies the makefile to remove the -m 755, etc. and it works fine so far. Right now, the Applescript installer is a way better method to install than homebrew.
On Oct 14, 2015, at 10:40 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
If you look at the top of the Makefile in libyuv:
PREFIX:=/usr EXEC_PREFIX:=$(PREFIX) LIBDIR:=$(PREFIX)/lib/ INCDIR:=$(PREFIX)/include/
you can override these on the make line:
PREFIX=/usr/local make install <--- something like this...
this should allow you to make a homebrew recipe without having to patch anything
On Oct 14, 2015, at 12:40 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Homebrew puts everything in /usr/local. In fact, if you follow the wiki you can actually delete the whole /usr/local to remove everything except Xcode and start over again since /usr/local is not used by OS X.
I would like to make a homebrew formula called freeswitch-support which would install all prereqs. This would allow anyone to later install whatever version of FS they want. Then, it would be simple to add a freeswitch formula (which I see someone already started) that would simply invoked freeswitch-support and install the current production version. I am stumbling learning hombrew formulas but hope to I can figure them out.
BTW, I am updating the wiki today for 1.6, working in the Applescript installer right now. Mario G
On Oct 13, 2015, at 10:20 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote:
Does homebrew use /usr/local ? I thought they had their own lib prefix that we could make a recope for and install it there by their policy so the eventual fs hombrew package would just fit in.
On Tuesday, October 13, 2015, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote: FINALLY! I got libyuv installed into /usr/local, also flite, libvpx, and opus. And lua and libsndfile from homebrew. Freeswitch 1.7 master built and came up! BTW, the previous problem I had was dumb, I had to do a new git clone of FS and it found libyuv in /usr/local.
Thanks for the guidance! Now for thorough testing then updating the Applescript FS installer and wiki pages. Mario G
> On Oct 13, 2015, at 2:58 PM, Michael Jerris <mike@jerris.com <>> wrote: > > >> On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com <>> wrote: >> >> What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git? <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?> > These are the same, just one has my user id in the url > >> >> I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in <http://pc.in/> files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv. > > You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that. > >> >>> On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com <>> wrote: >>> >>> not sure what you mean by the one in support lib. >>> >>> If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file >>> >>>> On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <>> wrote: >>>> >>>> Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula. >>>> >>>> I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further. >>>> >>>> >>>>> On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <>> wrote: >>>>> >>>>> 509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> >>>>> 510 cd libyuv >>>>> 512 make >>>>> 514 sudo make install >>>>> >>>>> just did on my machine and it worked fine? >>>>> >>>>>> On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <>> wrote: >>>>>> >>>>>> I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it. >>>>>> > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <> > http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> > > Official FreeSWITCH Sites > http://www.freeswitch.org <http://www.freeswitch.org/> > http://confluence.freeswitch.org <http://confluence.freeswitch.org/> > http://www.cluecon.com <http://www.cluecon.com/> > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> > http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Remove the perl commands to avoid any modification: cd /usr/local/src git clone https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> cd libyuv perl -pi -e s{PREFIX:=/usr}{PREFIX:=/usr/local} /usr/local/src/libyuvx/makefile perl -pi -e s{" -m 755 "}{" "} /usr/local/src/libyuvx/makefile perl -pi -e s{" -m 644 "}{" "} /usr/local/src/libyuvx/makefile ./configure --prefix=/usr/local make make install
On Oct 15, 2015, at 11:12 AM, Michael Jerris <mike@jerris.com> wrote:
can you give me the exact command you run without modifying anything and the error you are getting please?
On Oct 15, 2015, at 1:41 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
The lines that failed are the ones with -755 and -644. My script works fine and just makes the 3 changes below. I documented it in the wiki but may simplify it further. Since it’s unique to OS X it should be fine. Especially if people use the script (which I plan to upload by this weekend after I handle nasm below). If it becomes easier I will update the wiki and script.
3 changes made to libyuv makefile: PREFIX from /usr to /usr/local Removes -m 755 in all lines Removes -m 644 in all lines
BTW, LIBVPX needs an updated “nasm” on 10.9 and 10.10, not on 10.11. I added to the 10.9 wik (in progress)i but need to automate it in the installer script. Should be done by this weekend.
On Oct 14, 2015, at 2:16 PM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
Get me the details of what commands failed so we can just fix the Makefile instead of hacking it during build.
On Oct 14, 2015, at 3:52 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Thanks, I tried that but there is a problem with the chmod commands at the bottom of makefile. I simply added perl commands to the Applescript Installer that modifies the makefile to remove the -m 755, etc. and it works fine so far. Right now, the Applescript installer is a way better method to install than homebrew.
On Oct 14, 2015, at 10:40 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
If you look at the top of the Makefile in libyuv:
PREFIX:=/usr EXEC_PREFIX:=$(PREFIX) LIBDIR:=$(PREFIX)/lib/ INCDIR:=$(PREFIX)/include/
you can override these on the make line:
PREFIX=/usr/local make install <--- something like this...
this should allow you to make a homebrew recipe without having to patch anything
On Oct 14, 2015, at 12:40 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Homebrew puts everything in /usr/local. In fact, if you follow the wiki you can actually delete the whole /usr/local to remove everything except Xcode and start over again since /usr/local is not used by OS X.
I would like to make a homebrew formula called freeswitch-support which would install all prereqs. This would allow anyone to later install whatever version of FS they want. Then, it would be simple to add a freeswitch formula (which I see someone already started) that would simply invoked freeswitch-support and install the current production version. I am stumbling learning hombrew formulas but hope to I can figure them out.
BTW, I am updating the wiki today for 1.6, working in the Applescript installer right now. Mario G
> On Oct 13, 2015, at 10:20 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote: > > Does homebrew use /usr/local ? I thought they had their own lib prefix that we could make a recope for and install it there by their policy so the eventual fs hombrew package would just fit in. > > On Tuesday, October 13, 2015, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote: > FINALLY! I got libyuv installed into /usr/local, also flite, libvpx, and opus. And lua and libsndfile from homebrew. Freeswitch 1.7 master built and came up! BTW, the previous problem I had was dumb, I had to do a new git clone of FS and it found libyuv in /usr/local. > > Thanks for the guidance! Now for thorough testing then updating the Applescript FS installer and wiki pages. > Mario G > > >> On Oct 13, 2015, at 2:58 PM, Michael Jerris <mike@jerris.com <>> wrote: >> >> >>> On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com <>> wrote: >>> >>> What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git? <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?> >> These are the same, just one has my user id in the url >> >>> >>> I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in <http://pc.in/> files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv. >> >> You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that. >> >>> >>>> On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com <>> wrote: >>>> >>>> not sure what you mean by the one in support lib. >>>> >>>> If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file >>>> >>>>> On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <>> wrote: >>>>> >>>>> Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula. >>>>> >>>>> I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further. >>>>> >>>>> >>>>>> On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <>> wrote: >>>>>> >>>>>> 509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> >>>>>> 510 cd libyuv >>>>>> 512 make >>>>>> 514 sudo make install >>>>>> >>>>>> just did on my machine and it worked fine? >>>>>> >>>>>>> On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <>> wrote: >>>>>>> >>>>>>> I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it. >>>>>>> >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <> >> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org <http://www.freeswitch.org/> >> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> >> http://www.cluecon.com <http://www.cluecon.com/> >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> >> http://www.freeswitch.org <http://www.freeswitch.org/> > > > -- > Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ > > ☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> > ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+> > > ClueCon Weekly Development Call > ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900 > > https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> > https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA> > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> > > Official FreeSWITCH Sites > http://www.freeswitch.org <http://www.freeswitch.org/> > http://confluence.freeswitch.org <http://confluence.freeswitch.org/> > http://www.cluecon.com <http://www.cluecon.com/> > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> > http://www.freeswitch.org <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Whoops typo, there is no ./configure for libyuv…
On Oct 15, 2015, at 3:47 PM, Mario G <mario_fs@mgtech.com> wrote:
Remove the perl commands to avoid any modification: cd /usr/local/src git clone https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> cd libyuv perl -pi -e s{PREFIX:=/usr}{PREFIX:=/usr/local} /usr/local/src/libyuvx/makefile perl -pi -e s{" -m 755 "}{" "} /usr/local/src/libyuvx/makefile perl -pi -e s{" -m 644 "}{" "} /usr/local/src/libyuvx/makefile ./configure --prefix=/usr/local make make install
On Oct 15, 2015, at 11:12 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
can you give me the exact command you run without modifying anything and the error you are getting please?
On Oct 15, 2015, at 1:41 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
The lines that failed are the ones with -755 and -644. My script works fine and just makes the 3 changes below. I documented it in the wiki but may simplify it further. Since it’s unique to OS X it should be fine. Especially if people use the script (which I plan to upload by this weekend after I handle nasm below). If it becomes easier I will update the wiki and script.
3 changes made to libyuv makefile: PREFIX from /usr to /usr/local Removes -m 755 in all lines Removes -m 644 in all lines
BTW, LIBVPX needs an updated “nasm” on 10.9 and 10.10, not on 10.11. I added to the 10.9 wik (in progress)i but need to automate it in the installer script. Should be done by this weekend.
On Oct 14, 2015, at 2:16 PM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
Get me the details of what commands failed so we can just fix the Makefile instead of hacking it during build.
On Oct 14, 2015, at 3:52 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote:
Thanks, I tried that but there is a problem with the chmod commands at the bottom of makefile. I simply added perl commands to the Applescript Installer that modifies the makefile to remove the -m 755, etc. and it works fine so far. Right now, the Applescript installer is a way better method to install than homebrew.
On Oct 14, 2015, at 10:40 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
If you look at the top of the Makefile in libyuv:
PREFIX:=/usr EXEC_PREFIX:=$(PREFIX) LIBDIR:=$(PREFIX)/lib/ INCDIR:=$(PREFIX)/include/
you can override these on the make line:
PREFIX=/usr/local make install <--- something like this...
this should allow you to make a homebrew recipe without having to patch anything
> On Oct 14, 2015, at 12:40 PM, Mario G <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote: > > Homebrew puts everything in /usr/local. In fact, if you follow the wiki you can actually delete the whole /usr/local to remove everything except Xcode and start over again since /usr/local is not used by OS X. > > I would like to make a homebrew formula called freeswitch-support which would install all prereqs. This would allow anyone to later install whatever version of FS they want. Then, it would be simple to add a freeswitch formula (which I see someone already started) that would simply invoked freeswitch-support and install the current production version. I am stumbling learning hombrew formulas but hope to I can figure them out. > > BTW, I am updating the wiki today for 1.6, working in the Applescript installer right now. > Mario G > >> On Oct 13, 2015, at 10:20 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote: >> >> Does homebrew use /usr/local ? I thought they had their own lib prefix that we could make a recope for and install it there by their policy so the eventual fs hombrew package would just fit in. >> >> On Tuesday, October 13, 2015, Mario <mario_fs@mgtech.com <mailto:mario_fs@mgtech.com>> wrote: >> FINALLY! I got libyuv installed into /usr/local, also flite, libvpx, and opus. And lua and libsndfile from homebrew. Freeswitch 1.7 master built and came up! BTW, the previous problem I had was dumb, I had to do a new git clone of FS and it found libyuv in /usr/local. >> >> Thanks for the guidance! Now for thorough testing then updating the Applescript FS installer and wiki pages. >> Mario G >> >> >>> On Oct 13, 2015, at 2:58 PM, Michael Jerris <mike@jerris.com <>> wrote: >>> >>> >>>> On Oct 13, 2015, at 5:46 PM, Mario <mario_fs@mgtech.com <>> wrote: >>>> >>>> What I meant was was is the difference between the libyuv in https://freeswitch.org/stash/scm/sd/libyuv.git <https://freeswitch.org/stash/scm/sd/libyuv.git> and https://mikej@freeswitch.org/stash/scm/sd/libyuv.git? <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git?> >>> These are the same, just one has my user id in the url >>> >>>> >>>> I installed libyuv into /usr/local which is where I installed flite. Freeswitch make finds flite fine but not lubyuv. I modified libyuv makefile, .pc and .pc.in <http://pc.in/> files from /usr to /usr/local. The objective is I don’t want it in OS X system directories, should not need SUDO, and removal is easy. Can’t figure out why FS finds flite in /usr/local but not libyuv. >>> >>> You would have to take a look at the configure code for detection. I know libyuv needs pkg-config. You might be able to come up with some small patches for that makefile to make it possible to pass the prefix in as a var so we don't need to hack the files to build like that. >>> >>>> >>>>> On Oct 13, 2015, at 9:37 AM, Michael Jerris <mike@jerris.com <>> wrote: >>>>> >>>>> not sure what you mean by the one in support lib. >>>>> >>>>> If you are installing to a different locations, it will put the .pc file for pkg-config in that alt location too, then you either need to symlink that pc file to the places pkg-config looks in or something to get pkg-config to see that file >>>>> >>>>>> On Oct 13, 2015, at 12:27 PM, Mario <mario_fs@mgtech.com <>> wrote: >>>>>> >>>>>> Thank you, a question: How does this differ from the one in the support lib? The URL will go into the wiki and possibly a homebrew formula. >>>>>> >>>>>> I was able to make install it into /usr/local instead of /usr but freeswitch still does not find it. Will look into it further. >>>>>> >>>>>> >>>>>>> On Oct 12, 2015, at 10:48 AM, Michael Jerris <mike@jerris.com <>> wrote: >>>>>>> >>>>>>> 509 git clone https://mikej@freeswitch.org/stash/scm/sd/libyuv.git <https://mikej@freeswitch.org/stash/scm/sd/libyuv.git> >>>>>>> 510 cd libyuv >>>>>>> 512 make >>>>>>> 514 sudo make install >>>>>>> >>>>>>> just did on my machine and it worked fine? >>>>>>> >>>>>>>> On Oct 12, 2015, at 1:39 PM, Mario <mario_fs@mgtech.com <>> wrote: >>>>>>>> >>>>>>>> I got nowhere this weekend trying to compile libyuv on OS X so will wait for Michael’s magic. I am also looking into making the new prereqs homebrew formulas and want to see if it’s possible for libyuv. If so, I was thinking of doing a homebrew formula called “freeswitch-support/prereqs” with everything in it. >>>>>>>> >>> >>> _________________________________________________________________________ >>> Professional FreeSWITCH Consulting Services: >>> consulting@freeswitch.org <> >>> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> >>> >>> Official FreeSWITCH Sites >>> http://www.freeswitch.org <http://www.freeswitch.org/> >>> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> >>> http://www.cluecon.com <http://www.cluecon.com/> >>> >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users@lists.freeswitch.org <> >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> >>> http://www.freeswitch.org <http://www.freeswitch.org/> >> >> >> -- >> Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ >> >> ☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> >> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+> >> >> ClueCon Weekly Development Call >> ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900 >> >> https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> >> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA> >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> >> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org <http://www.freeswitch.org/> >> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> >> http://www.cluecon.com <http://www.cluecon.com/> >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> >> http://www.freeswitch.org <http://www.freeswitch.org/> > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> > > Official FreeSWITCH Sites > http://www.freeswitch.org <http://www.freeswitch.org/> > http://confluence.freeswitch.org <http://confluence.freeswitch.org/> > http://www.cluecon.com <http://www.cluecon.com/> > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (6)
-
Anthony Minessale
-
Mario
-
Mario G
-
Michael Jerris
-
Seven Du
-
Thomas Quintana