FreeSWITCH Weekly News and Notes
Hello again! Another busy week in the land of FreeSWITCH. As you know we have been doing some work on the FreeSWITCH project's infrastructure. We are happy to report that this work is essentially complete. Thank you for your patience in this process. We've experienced intermittent outages but thanks to the efforts of Brian West and Raymond Chandler these have been kept to a minimum. We also thank Ken Rice for his hard work during this time. His knowledge and experience have been invaluable. Last week we had a very interesting discussion<http://wiki.freeswitch.org/wiki/FS_weekly_2012_10_17>from Chad Engler about his nodesl <https://github.com/englercj/node-esl> library - a connector between node.js and ESL <http://wiki.freeswitch.org/wiki/Esl>. Chad describes himself as a Web developer learning the telephony side of things. However, we were all impressed with how much knowledge he had with using ESL given the relatively short amount of time he's been working with it. This week<http://wiki.freeswitch.org/wiki/FS_weekly_2012_10_24>we will be looking in on some Windows-centric ways of handling real-time data and related PBX items. The following week, on October 31, we will be hearing from our friends over at Redshift Networks<http://www.redshiftnetworks.com/>. They will be giving us close-up look at some of the worldwide SIP attacks that are being perpetrated against FreeSWITCH and other IP telephony servers. On a personal note I would like to thank everyone who volunteered to be a technical reviewer of the new edition of the FreeSWITCH book<https://www.packtpub.com/freeswitch-1-0-6-build-robust-high-performance-telephony-systems/book>. I was overwhelmed with just how many people who are willing to volunteer their time. Packt Publishing will be contacting those who've been selected for this important job. This is a great community and we are all glad to be a part of it. Take care and have a great week. -- Michael S Collins ClueCon Team http://www.cluecon.com 877-7-4ACLUE
On Mon, Oct 22, 2012 at 2:05 PM, Michael Collins <marketing@cluecon.com> wrote:
The following week, on October 31, we will be hearing from our friends over at Redshift Networks. They will be giving us close-up look at some of the worldwide SIP attacks that are being perpetrated against FreeSWITCH and other IP telephony servers.
Are there attacks in the wild that are specifically targeting FreeSWITCH? Something more than the typical friendly-scanner? Gabe
On Mon, Oct 22, 2012 at 2:04 PM, Gabriel Gunderson <gabe@gundy.org> wrote:
On Mon, Oct 22, 2012 at 2:05 PM, Michael Collins <marketing@cluecon.com> wrote:
The following week, on October 31, we will be hearing from our friends over at Redshift Networks. They will be giving us close-up look at some of the worldwide SIP attacks that are being perpetrated against FreeSWITCH and other IP telephony servers.
Are there attacks in the wild that are specifically targeting FreeSWITCH? Something more than the typical friendly-scanner?
Tune in on October 31st to find out! :D -MC
Gabe
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org
Just wondering what the state of mod_skinny is? We are currently attempting to move away from using Cisco UMC, and have most things working with Asterisk using the 3rd party chan_sccp-b driver. We are stuck at the moment using SCCP phones so the skinny protocol is a must (we are looking to move to SIP at later date). I have downloaded and installed FreeSWITCH v1.2.3 via tarball, and I was able to get my phones (7971-G) to register, but I have not be able to make any calls. I was able to install a SIP softphone and was able to call into the skinny phones, but currently I am unable to make outbound calls. If this functionality of mod_skinny is working I would appreciate some help in figuring out where I have errored at in my dialplan or skinny setup. Machine setup HP DL320 RAM: 2 gig OS: CentOS 6.0 x86_64 FreeSWITCH v1.2.4 Jacob Miles Software Engineer jacob.e.miles@l-3com.com
I just tested in the past weekend and 79xx works for me. I have no cisco right now, just hope this message helps. -- Seven Du Sent with Sparrow (http://www.sparrowmailapp.com/?sig) On Tuesday, October 23, 2012 at 7:29 AM, Jacob.E.Miles@l-3com.com wrote:
Just wondering what the state of mod_skinny is? We are currently attempting to move away from using Cisco UMC, and have most things working with Asterisk using the 3rd party chan_sccp-b driver. We are stuck at the moment using SCCP phones so the skinny protocol is a must (we are looking to move to SIP at later date).
I have downloaded and installed FreeSWITCH v1.2.3 via tarball, and I was able to get my phones (7971-G) to register, but I have not be able to make any calls. I was able to install a SIP softphone and was able to call into the skinny phones, but currently I am unable to make outbound calls. If this functionality of mod_skinny is working I would appreciate some help in figuring out where I have errored at in my dialplan or skinny setup.
Machine setup HP DL320 RAM: 2 gig OS: CentOS 6.0 x86_64 FreeSWITCH v1.2.4
Jacob Miles Software Engineer jacob.e.miles@l-3com.com (mailto:jacob.e.miles@l-3com.com)
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org (mailto:FreeSWITCH-users@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
The last time I used mod_skinny was more than a year ago. If you use Cisco-only SCCP phones it should work without any problems. The problem I ran into was a mix between SCCP and SIP (Cisco and Aasta). The codec negotiation was the problem as far as I can remember. Regards Erik Certhon ABC Westland 555 Tel: +31 174 22 50 80 P.O. Box 90 Fax: +31 174 22 50 81 2685 ZH Poeldijk erik.dekkers@certhon.com The Netherlands www.certhon.com DISCLAIMER All our quotations, all orders and all contracts are subject to the AVAG-CONDITIONS. Op alle offertes, opdrachten en overeenkomsten zijn de AVAG-verkoopvoorwaarden van toepassing. -----Oorspronkelijk bericht----- Van: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] Namens Jacob.E.Miles@L-3Com.com Verzonden: dinsdag 23 oktober 2012 1:30 Aan: FreeSWITCH Users Help Onderwerp: [Freeswitch-users] State of mod_skinny? Just wondering what the state of mod_skinny is? We are currently attempting to move away from using Cisco UMC, and have most things working with Asterisk using the 3rd party chan_sccp-b driver. We are stuck at the moment using SCCP phones so the skinny protocol is a must (we are looking to move to SIP at later date). I have downloaded and installed FreeSWITCH v1.2.3 via tarball, and I was able to get my phones (7971-G) to register, but I have not be able to make any calls. I was able to install a SIP softphone and was able to call into the skinny phones, but currently I am unable to make outbound calls. If this functionality of mod_skinny is working I would appreciate some help in figuring out where I have errored at in my dialplan or skinny setup. Machine setup HP DL320 RAM: 2 gig OS: CentOS 6.0 x86_64 FreeSWITCH v1.2.4 Jacob Miles Software Engineer jacob.e.miles@l-3com.com _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (6)
-
Erik Dekkers
-
Gabriel Gunderson
-
Jacob.E.Miles＠L-3Com.com
-
Michael Collins
-
Michael Collins
-
Seven Du