That's a PCMU ptime parameter. It looks like your clients are now sending with a ptime of 30, where FS is expecting a ptime of 20. This isn't something that would have changed in FS as far as I know. FS should still default to a PCMU ptime of 20. It's likely your clients are no longer sending an option for ptime of 20. Do you have a sip trace?

I'm not so sure about that. There was another thread on this list a few days ago where someone also was having problems due to ptime. They showed a log file from an older version of FS and a newer one. The older version switched from the expected ptime to the one FS was requesting while the newer version ignored that codec option. It did look like a behaviour change. -Steve On 23 April 2013 04:57, William King <william.king@quentustech.com> wrote:

That's a PCMU ptime parameter. It looks like your clients are now sending with a ptime of 30, where FS is expecting a ptime of 20.

This isn't something that would have changed in FS as far as I know. FS should still default to a PCMU ptime of 20. It's likely your clients are no longer sending an option for ptime of 20. Do you have a sip trace?

Let me know if you need more assistance.

William King Senior Engineer Quentus Technologies, INC 1037 NE 65th St Suite 273 Seattle, WA 98115 Main: (877) 211-9337 Office: (206) 388-4772 Cell: (253) 686-5518 william.king@quentustech.com

On 04/22/2013 08:48 PM, Sean Devoy wrote:

...

Hi All,

I do truly hope someone responds before morning when my customers get back to work.

I did a make current and it went swell!

I rebooted, everything registered, looked great – BUT …

Everything everyone dials gets codec mismatches and then [INCOMPATIBLE_DESTINATION]

The codecs look like this:

2013-04-22 23:42:02.138488 [DEBUG] switch_core_media.c:2597

Audio Codec Compare [PCMU:0:8000:*30*:64000]/[PCMU:0:8000:*20*:64000]

But I don’t know how to set that parameter in in FS or on the devices!

Any help greatly appreciated.

Sean

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

I am sorry, I don’t know what that means or how to check. Nor do I know how to find my codec vars. It seems to me I used to see a message that said “Asynch ptime not allowed changing our end to 20 (or 30)” Anyway, please tell me how to find out if transcoding is disabled and if I want it to be. I didn’t want to change anything just get a bug fix for dtmf error. I THANK YOU for your time From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Tuesday, April 23, 2013 12:20 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] URGENT HELP! Customers cant make any calls -after MAKE CURRENT Do you have transcoding disabled? On 4/22/13 11:13 PM, "Luis Daniel Lucio Quiroz" <luis.daniel.lucio@gmail.com> wrote: Just guessing, try reload mod_spandsp Post your codec vars also El abr 22, 2013 11:52 p.m., "Sean Devoy" <sdevoy@bizfocused.com> escribió: Hi All, I do truly hope someone responds before morning when my customers get back to work. I did a make current and it went swell! I rebooted, everything registered, looked great – BUT … Everything everyone dials gets codec mismatches and then [INCOMPATIBLE_DESTINATION] The codecs look like this: 2013-04-22 23:42:02.138488 [DEBUG] switch_core_media.c:2597 Audio Codec Compare [PCMU:0:8000:30:64000]/[PCMU:0:8000:20:64000] But I don’t know how to set that parameter in in FS or on the devices! Any help greatly appreciated. Sean _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _____ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch

reload mod_spandsp +OK Reloading XML +OK module unloaded +OK module loaded 2013-04-23 00:41:10.518612 [INFO] mod_enum.c:872 ENUM Reloaded 2013-04-23 00:41:10.518612 [INFO] switch_time.c:1173 Timezone reloaded 530 definitions 2013-04-23 00:41:10.518612 [DEBUG] switch_loadable_module.c:848 Write lock interface 'modem' to wait for existing references. 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:856 Deleting Endpoint 'modem' 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 6 ADPCM (IMA) 16000hz 10ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 6 ADPCM (IMA) 16000hz 20ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 6 ADPCM (IMA) 16000hz 30ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 6 ADPCM (IMA) 16000hz 40ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 6 ADPCM (IMA) 16000hz 50ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 6 ADPCM (IMA) 16000hz 60ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 10ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 20ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 30ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 40ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 50ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 60ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 70ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 80ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 90ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 100ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 110ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec DVI4 5 ADPCM (IMA) 8000hz 120ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 10ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 20ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 30ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 40ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 50ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 60ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 70ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 80ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 90ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 100ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 110ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 120ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 10ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 20ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 30ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 40ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 50ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 60ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 70ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 80ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 90ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 100ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 110ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-16 124 G.726 16k 8000hz 120ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 10ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 20ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 30ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 40ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 50ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 60ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 70ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 80ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 90ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 100ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 110ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 120ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 10ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 20ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 30ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 40ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 50ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 60ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 70ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 80ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 90ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 100ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 110ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-24 123 G.726 24k 8000hz 120ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 10ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 20ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 30ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 40ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 50ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 60ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 70ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 80ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 90ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 100ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 110ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 120ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 10ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 20ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 30ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 40ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 50ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 60ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 70ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 80ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 90ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 100ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 110ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-32 122 G.726 32k 8000hz 120ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 10ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 20ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 30ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 40ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 50ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 60ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 70ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 80ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 90ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 100ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 110ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 120ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 10ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 20ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 30ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 40ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 50ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 60ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 70ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 80ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 90ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 100ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 110ms 2013-04-23 00:41:10.518612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G726-40 121 G.726 40k 8000hz 120ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G722 9 G.722 16000hz 10ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G722 9 G.722 16000hz 20ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G722 9 G.722 16000hz 30ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G722 9 G.722 16000hz 40ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G722 9 G.722 16000hz 50ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec G722 9 G.722 16000hz 60ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec GSM 3 GSM 8000hz 20ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec GSM 3 GSM 8000hz 40ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec GSM 3 GSM 8000hz 60ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec GSM 3 GSM 8000hz 80ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec GSM 3 GSM 8000hz 100ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec GSM 3 GSM 8000hz 120ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:882 Deleting Codec LPC 7 LPC-10 8000hz 90ms 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 't38_gateway' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 't38_gateway' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'rxfax' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'rxfax' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'txfax' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'txfax' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'spandsp_stop_dtmf' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'spandsp_stop_dtmf' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'spandsp_start_dtmf' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'spandsp_start_dtmf' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'spandsp_stop_inject_tdd' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'spandsp_stop_inject_tdd' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'spandsp_inject_tdd' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'spandsp_inject_tdd' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'spandsp_stop_detect_tdd' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'spandsp_stop_detect_tdd' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'spandsp_detect_tdd' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'spandsp_detect_tdd' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'spandsp_send_tdd' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'spandsp_send_tdd' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'spandsp_start_fax_detect' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'spandsp_start_fax_detect' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'spandsp_stop_fax_detect' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'spandsp_stop_fax_detect' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'start_tone_detect' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'start_tone_detect' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:938 Deleting Application 'stop_tone_detect' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:940 Write lock interface 'stop_tone_detect' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:991 Deleting API Function 'start_tone_detect' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:993 Write lock interface 'start_tone_detect' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:991 Deleting API Function 'stop_tone_detect' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:993 Write lock interface 'stop_tone_detect' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:991 Deleting API Function 'start_tdd_detect' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:993 Write lock interface 'start_tdd_detect' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:991 Deleting API Function 'stop_tdd_detect' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:993 Write lock interface 'stop_tdd_detect' to wait for existing references. 2013-04-23 00:41:10.538612 [NOTICE] switch_loadable_module.c:991 Deleting API Function 'uuid_send_tdd' 2013-04-23 00:41:10.538612 [DEBUG] switch_loadable_module.c:993 Write lock interface 'uuid_send_tdd' to wait for existing references. 2013-04-23 00:41:10.538612 [CONSOLE] switch_loadable_module.c:1816 Stopping: mod_spandsp 2013-04-23 00:41:10.538612 [NOTICE] switch_event.c:1970 Event Binding deleted for mod_spandsp:RELOADXML 2013-04-23 00:41:10.538612 [NOTICE] switch_event.c:1970 Event Binding deleted for mod_spandsp:CUSTOM 2013-04-23 00:41:10.538612 [DEBUG] mod_spandsp_fax.c:227 FAX timer thread ended. 2013-04-23 00:41:10.538612 [CONSOLE] switch_loadable_module.c:1836 mod_spandsp unloaded. 2013-04-23 00:41:10.538612 [DEBUG] mod_spandsp_fax.c:192 FAX timer thread started. 2013-04-23 00:41:10.558605 [DEBUG] mod_spandsp.c:780 mod_spandsp loaded, using spandsp library version [20120902 163333] 2013-04-23 00:41:10.558605 [CONSOLE] switch_loadable_module.c:1350 Successfully Loaded [mod_spandsp] 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:146 Adding Endpoint 'modem' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 6 ADPCM (IMA) 16000hz 10ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 6 ADPCM (IMA) 16000hz 20ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 6 ADPCM (IMA) 16000hz 30ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 6 ADPCM (IMA) 16000hz 40ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 6 ADPCM (IMA) 16000hz 50ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 6 ADPCM (IMA) 16000hz 60ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 10ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 20ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 30ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 40ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 50ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 60ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 70ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 80ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 90ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 100ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 110ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec DVI4 5 ADPCM (IMA) 8000hz 120ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 10ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 20ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 30ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 40ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 50ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 60ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 70ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 80ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 90ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 100ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 110ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-16 124 G.726 16k (AAL2) 8000hz 120ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 10ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 20ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 30ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 40ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 50ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 60ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 70ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 80ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 90ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 100ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 110ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-16 124 G.726 16k 8000hz 120ms 16000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 10ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 20ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 30ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 40ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 50ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 60ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 70ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 80ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 90ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 100ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 110ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-24 123 G.726 24k (AAL2) 8000hz 120ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 10ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 20ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 30ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 40ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 50ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 60ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 70ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 80ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 90ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 100ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 110ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-24 123 G.726 24k 8000hz 120ms 24000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 10ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 20ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 30ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 40ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 50ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 60ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 70ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 80ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 90ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 100ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 110ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-32 122 G.726 32k (AAL2) 8000hz 120ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 10ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 20ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 30ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 40ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 50ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 60ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 70ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 80ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 90ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 100ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 110ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-32 122 G.726 32k 8000hz 120ms 32000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 10ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 20ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 30ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 40ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 50ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 60ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 70ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 80ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 90ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 100ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 110ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec AAL2-G726-40 121 G.726 40k (AAL2) 8000hz 120ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 10ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 20ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 30ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 40ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 50ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 60ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 70ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 80ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 90ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 100ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 110ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G726-40 121 G.726 40k 8000hz 120ms 40000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G722 9 G.722 16000hz 10ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G722 9 G.722 16000hz 20ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G722 9 G.722 16000hz 30ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G722 9 G.722 16000hz 40ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G722 9 G.722 16000hz 50ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec G722 9 G.722 16000hz 60ms 64000bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec GSM 3 GSM 8000hz 20ms 13200bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec GSM 3 GSM 8000hz 40ms 13200bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec GSM 3 GSM 8000hz 60ms 13200bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec GSM 3 GSM 8000hz 80ms 13200bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec GSM 3 GSM 8000hz 100ms 13200bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec GSM 3 GSM 8000hz 120ms 13200bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:187 Adding Codec LPC 7 LPC-10 8000hz 90ms 2400bps 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 't38_gateway' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'rxfax' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'txfax' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'spandsp_stop_dtmf' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'spandsp_start_dtmf' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'spandsp_stop_inject_tdd' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'spandsp_inject_tdd' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'spandsp_stop_detect_tdd' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'spandsp_detect_tdd' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'spandsp_send_tdd' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'spandsp_start_fax_detect' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'spandsp_stop_fax_detect' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'start_tone_detect' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:254 Adding Application 'stop_tone_detect' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:298 Adding API Function 'start_tone_detect' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:298 Adding API Function 'stop_tone_detect' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:298 Adding API Function 'start_tdd_detect' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:298 Adding API Function 'stop_tdd_detect' 2013-04-23 00:41:10.558605 [NOTICE] switch_loadable_module.c:298 Adding API Function 'uuid_send_tdd' From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Tuesday, April 23, 2013 12:20 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] URGENT HELP! Customers cant make any calls -after MAKE CURRENT Do you have transcoding disabled? On 4/22/13 11:13 PM, "Luis Daniel Lucio Quiroz" <luis.daniel.lucio@gmail.com> wrote: Just guessing, try reload mod_spandsp Post your codec vars also El abr 22, 2013 11:52 p.m., "Sean Devoy" <sdevoy@bizfocused.com> escribió: Hi All, I do truly hope someone responds before morning when my customers get back to work. I did a make current and it went swell! I rebooted, everything registered, looked great – BUT … Everything everyone dials gets codec mismatches and then [INCOMPATIBLE_DESTINATION] The codecs look like this: 2013-04-22 23:42:02.138488 [DEBUG] switch_core_media.c:2597 Audio Codec Compare [PCMU:0:8000:30:64000]/[PCMU:0:8000:20:64000] But I don’t know how to set that parameter in in FS or on the devices! Any help greatly appreciated. Sean _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _____ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch

I wish I knew how, I have version FreeSWITCH Version 1.5.1b+git~20130422T213105Z~2d96d7c165 (git 2d96d7c 2013-04-22 21:31:05Z) I would love to get back to the stable branch -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of covici@ccs.covici.com Sent: Tuesday, April 23, 2013 12:47 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] URGENT HELP! Customers cant make any calls -after MAKE CURRENT If you go back to the previous version of fs, does it work again? Luis Daniel Lucio Quiroz <luis.daniel.lucio@gmail.com> wrote:

Just guessing, try reload mod_spandsp

Post your codec vars also El abr 22, 2013 11:52 p.m., "Sean Devoy" <sdevoy@bizfocused.com> escribió:

...

Hi All,****

** **

I do truly hope someone responds before morning when my customers get back to work.****

** **

I did a make current and it went swell!****

** **

I rebooted, everything registered, looked great – BUT …****

** **

Everything everyone dials gets codec mismatches and then [INCOMPATIBLE_DESTINATION]****

** **

The codecs look like this:****

2013-04-22 23:42:02.138488 [DEBUG] switch_core_media.c:2597 ****

Audio Codec Compare [PCMU:0:8000:*30*:64000]/[PCMU:0:8000:*20*:64000]****

** **

But I don’t know how to set that parameter in in FS or on the devices!****

** **

Any help greatly appreciated.****

** **

Sean****

** **

____________________________________________________________________ _____ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-u sers http://www.freeswitch.org

---------------------------------------------------- Alternatives:

---------------------------------------------------- ______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org

-- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici@ccs.covici.com _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

In the root directory of your copy of the git repo, you can do the following: git branch -a <-- this will list out all the available branches git checkout name_of_branch <-- this will set you to the most recent commit to the given branch. You can also specify the specific hash for a given commit as well here too. Please note that I personally *never* use make current, and instead make a completely new build every time I compile. But that's just me... YMMV... -Yossi On 04/23/2013 12:11 AM, Sean Devoy wrote:

Thank GOD for backups - never forget Jesus saves (and does backups regularly)!

NEVERMIND - I am back to where I started.

I would very much like to know the commands to get me over to the stable branch.

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

Try to add something like PCMU@8000h@*30i* to conf/vars.xml to this part: ----- this is mine --- <X-PRE-PROCESS cmd="set" data="global_codec_prefs=PCMA,PCMU,GSM,speex@8000h @20i"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMA,PCMU,G729,speex@8000h@20i"/> ----- 2013/4/23 Sean Devoy <sdevoy@bizfocused.com>

I wish I knew how, I have version FreeSWITCH Version 1.5.1b+git~20130422T213105Z~2d96d7c165 (git 2d96d7c 2013-04-22 21:31:05Z)

I would love to get back to the stable branch

-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of covici@ccs.covici.com Sent: Tuesday, April 23, 2013 12:47 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] URGENT HELP! Customers cant make any calls -after MAKE CURRENT

If you go back to the previous version of fs, does it work again?

Luis Daniel Lucio Quiroz <luis.daniel.lucio@gmail.com> wrote:

...

Just guessing, try reload mod_spandsp

Post your codec vars also El abr 22, 2013 11:52 p.m., "Sean Devoy" <sdevoy@bizfocused.com> escribió:

...

Hi All,****

** **

I do truly hope someone responds before morning when my customers get back to work.****

** **

I did a make current and it went swell!****

** **

I rebooted, everything registered, looked great – BUT …****

** **

Everything everyone dials gets codec mismatches and then [INCOMPATIBLE_DESTINATION]****

** **

The codecs look like this:****

2013-04-22 23:42:02.138488 [DEBUG] switch_core_media.c:2597 ****

Audio Codec Compare [PCMU:0:8000:*30*:64000]/[PCMU:0:8000:*20*:64000]****

** **

But I don’t know how to set that parameter in in FS or on the devices!****

** **

Any help greatly appreciated.****

** **

Sean****

** **

____________________________________________________________________ _____ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-u sers http://www.freeswitch.org

---------------------------------------------------- Alternatives:

---------------------------------------------------- ______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org

-- Your life is like a penny. You're going to lose it. The question is: How do you spend it?

John Covici covici@ccs.covici.com

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

There seems to be a possible behavior change between head a stable with this. I opened a potential bug report to discuss this with the team. http://jira.freeswitch.org:8080/browse/FS-5331 -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/URGENT-HELP-Customers-cant-mak... Sent from the freeswitch-users mailing list archive at Nabble.com.

Its always been defaulted to 20 if you only put PCMU in the codec list. That hasn't changed. -- Brian West brian@freeswitch.org FreeSWITCH Solutions, LLC PO BOX PO BOX 2531 Brookfield, WI 53008-2531 Twitter: @FreeSWITCH_Wire T: +1.918.420.9266 | F: +1.918.420.9267 | M: +1.918.424.WEST iNUM: +883 5100 1420 9266 ISN: 410*543 On Apr 23, 2013, at 8:53 AM, Sergey Okhapkin <sos@sokhapkin.dyndns.org> wrote:

It looks like PCMU in codec list now means PCMU@20i instead of expected PCMU@anyi

Sean, I posted message about this workaround 10 hours ago. You didn't see it? Dmitry. 2013/4/23 Sean Devoy <sdevoy@bizfocused.com>

Ha, Sergey where were you at midnight last night?****

I now understand the issue, and even what ptime is, and your fix would have worked perfectly.****

** **

Linksys and Cisco devices all seem to default to RTP Packet Size: 0.030and FS defaults to 0.020 (20ms). The difference is that the current head does not automatically adjust so I needed to specify the 30ms Codecs in defaults. The codecs are loaded, just not identified as valid defaults.** **

** **

Thank you to everyone who helped or at least tried.****

Sean****

** **

*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Sergey Okhapkin *Sent:* Tuesday, April 23, 2013 9:53 AM

*To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] URGENT HELP! Customers cant make any calls -after MAKE CURRENT****

** **

As a workaround I added "PCMU@8000h@30i,G729@8000h@30i" to global_codec_prefs.

It looks like PCMU in codec list now means PCMU@20*i* instead of expected PCMU@any*i*****

On 04/23/13 09:34, Jeff Lenk wrote:****

There seems to be a possible behavior change between head a stable with this.****

I opened a potential bug report to discuss this with the team.****

http://jira.freeswitch.org:8080/browse/FS-5331****

** **

** **

** **

--****

View this message in context: http://freeswitch-users.2379917.n2.nabble.com/URGENT-HELP-Customers-cant-mak...

Sent from the freeswitch-users mailing list archive at Nabble.com.****

** **

_________________________________________________________________________****

Professional FreeSWITCH Consulting Services:****

consulting@freeswitch.org****

http://www.freeswitchsolutions.com****

** **

FreeSWITCH-powered IP PBX: The CudaTel Communication Server****

http://www.cudatel.com****

** **

Official FreeSWITCH Sites****

http://www.freeswitch.org****

http://wiki.freeswitch.org****

http://www.cluecon.com****

** **

FreeSWITCH-users mailing list****

FreeSWITCH-users@lists.freeswitch.org****

http://lists.freeswitch.org/mailman/listinfo/freeswitch-users****

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users****

http://www.freeswitch.org****

** **

** **

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

How to instruct freeswitch to accept (and transcode) any ptime on leg a, but offer 20ms only on leg b of bridge? On 04/23/13 12:02, Anthony Minessale wrote:

Dunno, this sort of make me feel guilty from trying to develop software. We have been making regular announcements for 2 solid months that large changes are rolling into master.

This is a problem I would love to solve. Where can we put messages so everyone in the community sees them? The list, twitter, our homepage, weekly conf call all seem to fail me.

On Tue, Apr 23, 2013 at 10:48 AM, Dmitry Lysenko <dvl36.ripe.nick@gmail.com <mailto:dvl36.ripe.nick@gmail.com>> wrote:

Sean, I posted message about this workaround 10 hours ago. You didn't see it?

Dmitry.

2013/4/23 Sean Devoy <sdevoy@bizfocused.com <mailto:sdevoy@bizfocused.com>>

Ha, Sergey where were you at midnight last night?

I now understand the issue, and even what ptime is, and your fix would have worked perfectly.

Linksys and Cisco devices all seem to default to RTP Packet Size: 0.030and FS defaults to 0.020 (20ms). The difference is that the current head does not automatically adjust so I needed to specify the 30ms Codecs in defaults. The codecs are loaded, just not identified as valid defaults.

Thank you to everyone who helped or at least tried.

Sean

*From:*freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Sergey Okhapkin *Sent:* Tuesday, April 23, 2013 9:53 AM

*To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] URGENT HELP! Customers cant make any calls -after MAKE CURRENT

As a workaround I added "PCMU@8000h@30i,G729@8000h@30i" to global_codec_prefs.

It looks like PCMU in codec list now means PCMU@20*i* instead of expected PCMU@any*i*

On 04/23/13 09:34, Jeff Lenk wrote:

There seems to be a possible behavior change between head a stable with this.

I opened a potential bug report to discuss this with the team.

http://jira.freeswitch.org:8080/browse/FS-5331

--

View this message in context: http://freeswitch-users.2379917.n2.nabble.com/URGENT-HELP-Customers-cant-mak...

Sent from the freeswitch-users mailing list archive at Nabble.com.

_________________________________________________________________________

Professional FreeSWITCH Consulting Services:

consulting@freeswitch.org <mailto:consulting@freeswitch.org>

http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server

http://www.cudatel.com

Official FreeSWITCH Sites

http://www.freeswitch.org

http://wiki.freeswitch.org

http://www.cluecon.com

FreeSWITCH-users mailing list

FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>

http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users

http://www.freeswitch.org

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch

FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

Welcome to telephony! Glad to hear that you learned about ptime and a few other tricks. There are plenty of new things to learn when it comes to VoIP and FreeSWITCH. Keep up the good work. -MC P.S. - you'd better get a sandbox/test server if you're going to be putting 1.5.x into production. On Tue, Apr 23, 2013 at 9:50 AM, Sean Devoy <sdevoy@bizfocused.com> wrote:

Sorry Dmitry. I probably did, but 10 hours ago I didn’t understand what ptime was or how to add more default codecs. It’s not just that I didn’t understand the problem, I didn’t understand how to do the fixes that were proposed. I do certainly appreciate you help.****

** **

There are so many new things for me in SIP/FS/VOIP, I am learning though. Thanks for your patients.****

** **

Sean****

** **

** **

** **

*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Dmitry Lysenko *Sent:* Tuesday, April 23, 2013 11:49 AM

*To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] URGENT HELP! Customers cant make any calls -after MAKE CURRENT****

** **

Sean, I posted message about this workaround 10 hours ago. You didn't see it?****

** **

Dmitry.****

** **

2013/4/23 Sean Devoy <sdevoy@bizfocused.com>****

Ha, Sergey where were you at midnight last night?****

I now understand the issue, and even what ptime is, and your fix would have worked perfectly.****

****

Linksys and Cisco devices all seem to default to RTP Packet Size: 0.030and FS defaults to 0.020 (20ms). The difference is that the current head does not automatically adjust so I needed to specify the 30ms Codecs in defaults. The codecs are loaded, just not identified as valid defaults.** **

****

Thank you to everyone who helped or at least tried.****

Sean****

****

*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Sergey Okhapkin *Sent:* Tuesday, April 23, 2013 9:53 AM****

*To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] URGENT HELP! Customers cant make any calls -after MAKE CURRENT****

****

As a workaround I added "PCMU@8000h@30i,G729@8000h@30i" to global_codec_prefs.****

It looks like PCMU in codec list now means PCMU@20*i* instead of expected PCMU@any*i*****

On 04/23/13 09:34, Jeff Lenk wrote:****

There seems to be a possible behavior change between head a stable with this.****

I opened a potential bug report to discuss this with the team.****

http://jira.freeswitch.org:8080/browse/FS-5331****

****

****

****

--****

View this message in context: http://freeswitch-users.2379917.n2.nabble.com/URGENT-HELP-Customers-cant-mak...

Sent from the freeswitch-users mailing list archive at Nabble.com.****

****

_________________________________________________________________________****

Professional FreeSWITCH Consulting Services:****

consulting@freeswitch.org****

http://www.freeswitchsolutions.com****

****

FreeSWITCH-powered IP PBX: The CudaTel Communication Server****

http://www.cudatel.com****

****

Official FreeSWITCH Sites****

http://www.freeswitch.org****

http://wiki.freeswitch.org****

http://www.cluecon.com****

****

FreeSWITCH-users mailing list****

FreeSWITCH-users@lists.freeswitch.org****

http://lists.freeswitch.org/mailman/listinfo/freeswitch-users****

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users****

http://www.freeswitch.org****

****

****

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org****

** **

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org

OK. I just began to doubt that my messages reached the maillist. Dmitry. 2013/4/23 Sean Devoy <sdevoy@bizfocused.com>

Sorry Dmitry. I probably did, but 10 hours ago I didn’t understand what ptime was or how to add more default codecs. It’s not just that I didn’t understand the problem, I didn’t understand how to do the fixes that were proposed. I do certainly appreciate you help.****

** **

There are so many new things for me in SIP/FS/VOIP, I am learning though. Thanks for your patients.****

** **

Sean****

** **

** **

** **

*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Dmitry Lysenko *Sent:* Tuesday, April 23, 2013 11:49 AM

*To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] URGENT HELP! Customers cant make any calls -after MAKE CURRENT****

** **

Sean, I posted message about this workaround 10 hours ago. You didn't see it?****

** **

Dmitry.****

** **

2013/4/23 Sean Devoy <sdevoy@bizfocused.com>****

Ha, Sergey where were you at midnight last night?****

I now understand the issue, and even what ptime is, and your fix would have worked perfectly.****

****

Linksys and Cisco devices all seem to default to RTP Packet Size: 0.030and FS defaults to 0.020 (20ms). The difference is that the current head does not automatically adjust so I needed to specify the 30ms Codecs in defaults. The codecs are loaded, just not identified as valid defaults.** **

****

Thank you to everyone who helped or at least tried.****

Sean****

****

*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Sergey Okhapkin *Sent:* Tuesday, April 23, 2013 9:53 AM****

*To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] URGENT HELP! Customers cant make any calls -after MAKE CURRENT****

****

As a workaround I added "PCMU@8000h@30i,G729@8000h@30i" to global_codec_prefs.****

It looks like PCMU in codec list now means PCMU@20*i* instead of expected PCMU@any*i*****

On 04/23/13 09:34, Jeff Lenk wrote:****

There seems to be a possible behavior change between head a stable with this.****

I opened a potential bug report to discuss this with the team.****

http://jira.freeswitch.org:8080/browse/FS-5331****

****

****

****

--****

View this message in context: http://freeswitch-users.2379917.n2.nabble.com/URGENT-HELP-Customers-cant-mak...

Sent from the freeswitch-users mailing list archive at Nabble.com.****

****

_________________________________________________________________________****

Professional FreeSWITCH Consulting Services:****

consulting@freeswitch.org****

http://www.freeswitchsolutions.com****

****

FreeSWITCH-powered IP PBX: The CudaTel Communication Server****

http://www.cudatel.com****

****

Official FreeSWITCH Sites****

http://www.freeswitch.org****

http://wiki.freeswitch.org****

http://www.cluecon.com****

****

FreeSWITCH-users mailing list****

FreeSWITCH-users@lists.freeswitch.org****

http://lists.freeswitch.org/mailman/listinfo/freeswitch-users****

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users****

http://www.freeswitch.org****

****

****

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org****

** **

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com

Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org