Hi to all, I have configured opensips that works like load_balancer (wiki on FS page). So, we have SBC, trunk is made to Opensips, than opensips is load_balacing to FSs. When you call from FS, call is going to Opensips, then opensips redirect the call to SBC, if call must go outside. My question: FSs boxes are all the same (same dialplan, directory configuration, etc.). What happens if call is made to a user, which is registered on one of the FS box? I guess I must change dialplan and set that all trafic FS send to opensips (not internally), because if someone calls to a local user, but user is registered on other FS box, FS will behave as user is not registered. So, will opensips know which user is registered on which FS box when opensips will be doing load_balacing? Thanks for explenation. Regards, Miha
Hi Miha, I have a similar problem and would appreciate if you could give me a clue. I ve opensips as sbc and FS but i wonder why calls do not reach fs box. Could you please help me in configuring opensips with freeswitch as u made it? Thank u in advance regards, Sherif --- On Tue, 4/17/12, Miha <miha@softnet.si> wrote: From: Miha <miha@softnet.si> Subject: [Freeswitch-users] Freeswitch and Opensips To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Tuesday, April 17, 2012, 11:41 AM Hi to all, I have configured opensips that works like load_balancer (wiki on FS page). So, we have SBC, trunk is made to Opensips, than opensips is load_balacing to FSs. When you call from FS, call is going to Opensips, then opensips redirect the call to SBC, if call must go outside. My question: FSs boxes are all the same (same dialplan, directory configuration, etc.). What happens if call is made to a user, which is registered on one of the FS box? I guess I must change dialplan and set that all trafic FS send to opensips (not internally), because if someone calls to a local user, but user is registered on other FS box, FS will behave as user is not registered. So, will opensips know which user is registered on which FS box when opensips will be doing load_balacing? Thanks for explenation. Regards, Miha -----Inline Attachment Follows----- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Sherif, I hope I can give you a bit of help as my knowledge of Opensips is not quite good:) First I have configured opensips as is written on FS wiki (http://wiki.freeswitch.org/wiki/Enterprise_deployment_OpenSIPS). Did you fallow steps? This shoud work and opensips should load balacing calls to FS box. Than I have made like this: if (is_method("INVITE")) { if($rU=~"^[0]+"){ if (!load_balance("1","pstn","1")) { send_reply("503","Service Unavailable"); exit; } } else{ rewritehostport("xxx.xxx.xxx.xxx:5060"); } } Regards, Miha On 4/17/2012 11:47 AM, Sherif Omran wrote:
Hi Miha,
I have a similar problem and would appreciate if you could give me a clue. I ve opensips as sbc and FS but i wonder why calls do not reach fs box.
Could you please help me in configuring opensips with freeswitch as u made it?
Thank u in advance
regards, Sherif
--- On *Tue, 4/17/12, Miha /<miha@softnet.si>/* wrote:
From: Miha <miha@softnet.si> Subject: [Freeswitch-users] Freeswitch and Opensips To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Tuesday, April 17, 2012, 11:41 AM
Hi to all,
I have configured opensips that works like load_balancer (wiki on FS page). So, we have SBC, trunk is made to Opensips, than opensips is load_balacing to FSs. When you call from FS, call is going to Opensips, then opensips redirect the call to SBC, if call must go outside.
My question:
FSs boxes are all the same (same dialplan, directory configuration, etc.). What happens if call is made to a user, which is registered on one of the FS box? I guess I must change dialplan and set that all trafic FS send to opensips (not internally), because if someone calls to a local user, but user is registered on other FS box, FS will behave as user is not registered.
So, will opensips know which user is registered on which FS box when opensips will be doing load_balacing?
Thanks for explenation.
Regards, Miha
-----Inline Attachment Follows-----
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org </mc/compose?to=consulting@freeswitch.org> http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org </mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
My question:
FSs boxes are all the same (same dialplan, directory configuration, etc.). What happens if call is made to a user, which is registered on one of the FS box? I guess I must change dialplan and set that all trafic FS send to opensips (not internally), because if someone calls to a local user, but user is registered on other FS box, FS will behave as user is not registered.
So, will opensips know which user is registered on which FS box when opensips will be doing load_balacing?
No, opensips will not know which user is registered to which FS box.
Good read http://blog.2600hz.com/post/18096749028/understanding-how-fs-supports-opensi... 17 апреля 2012 г. 13:41 пользователь Miha <miha@softnet.si> написал:
Hi to all,
I have configured opensips that works like load_balancer (wiki on FS page). So, we have SBC, trunk is made to Opensips, than opensips is load_balacing to FSs. When you call from FS, call is going to Opensips, then opensips redirect the call to SBC, if call must go outside.
My question:
FSs boxes are all the same (same dialplan, directory configuration, etc.). What happens if call is made to a user, which is registered on one of the FS box? I guess I must change dialplan and set that all trafic FS send to opensips (not internally), because if someone calls to a local user, but user is registered on other FS box, FS will behave as user is not registered.
So, will opensips know which user is registered on which FS box when opensips will be doing load_balacing?
Thanks for explenation.
Regards, Miha
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On 4/17/2012 2:15 PM, Anton Kvashenkin wrote:
Good read http://blog.2600hz.com/post/18096749028/understanding-how-fs-supports-opensi...
17 ?????? 2012 ?. 13:41 ???????????? Miha <miha@softnet.si <mailto:miha@softnet.si>> ???????:
Hi to all,
I have configured opensips that works like load_balancer (wiki on FS page). So, we have SBC, trunk is made to Opensips, than opensips is load_balacing to FSs. When you call from FS, call is going to Opensips, then opensips redirect the call to SBC, if call must go outside.
My question:
FSs boxes are all the same (same dialplan, directory configuration, etc.). What happens if call is made to a user, which is registered on one of the FS box? I guess I must change dialplan and set that all trafic FS send to opensips (not internally), because if someone calls to a local user, but user is registered on other FS box, FS will behave as user is not registered.
So, will opensips know which user is registered on which FS box when opensips will be doing load_balacing?
Thanks for explenation.
Regards, Miha
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org HI,
thank you all for your answers . So If I would like to do load_balacing with opensips I would need some kind of logic for every registered phone I must know to which FS is registerd, so I would know to which one I must FDW call. But in this case this script do not work (as is written on FS wiki): if (is_method("INVITE")) { if (!load_balance("1","pstn","1")) { send_reply("503","Service Unavailable"); exit; } } else if (is_method("REGISTER")) { if (!ds_select_dst("1", "0")) { send_reply("503","Service Unavailable"); exit; } } else { send_reply("405","Method Not Allowed"); exit; } # route the request if (!t_relay()) { sl_reply_error(); } Example:. You have three users.A and B user are registered to FS1 and C user to FS2. A and C are talking if B gets a call as Opensips do not know to which box B is registered It could FWD it to FS2, which will not work as B is registered to FS1. Am I right? Rergards, Miha
Hi, I have configured Opensips to behave also as registrar. Only invites are load_balance to one of the FS boxes. What must I do in FS configuration as FS now reply Originate Failed. Cause: USER_NOT_REGISTERED. This is logically to me as users are registering to Opensips and FS handles media and etc. Is there any threat on wiki about this (I did not find)? p.s.: I have put opensips IP to FS ACL. Thanks for all your help! Regards, MIha On 4/20/2012 10:14 AM, Miha wrote:
On 4/17/2012 2:15 PM, Anton Kvashenkin wrote:
Good read http://blog.2600hz.com/post/18096749028/understanding-how-fs-supports-opensi...
17 ?????? 2012 ?. 13:41 ???????????? Miha <miha@softnet.si <mailto:miha@softnet.si>> ???????:
Hi to all,
I have configured opensips that works like load_balancer (wiki on FS page). So, we have SBC, trunk is made to Opensips, than opensips is load_balacing to FSs. When you call from FS, call is going to Opensips, then opensips redirect the call to SBC, if call must go outside.
My question:
FSs boxes are all the same (same dialplan, directory configuration, etc.). What happens if call is made to a user, which is registered on one of the FS box? I guess I must change dialplan and set that all trafic FS send to opensips (not internally), because if someone calls to a local user, but user is registered on other FS box, FS will behave as user is not registered.
So, will opensips know which user is registered on which FS box when opensips will be doing load_balacing?
Thanks for explenation.
Regards, Miha
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org HI,
thank you all for your answers . So If I would like to do load_balacing with opensips I would need some kind of logic for every registered phone I must know to which FS is registerd, so I would know to which one I must FDW call.
But in this case this script do not work (as is written on FS wiki):
if (is_method("INVITE")) { if (!load_balance("1","pstn","1")) { send_reply("503","Service Unavailable"); exit; } } else if (is_method("REGISTER")) { if (!ds_select_dst("1", "0")) { send_reply("503","Service Unavailable"); exit; } } else { send_reply("405","Method Not Allowed"); exit; }
# route the request if (!t_relay()) { sl_reply_error(); }
Example:. You have three users.A and B user are registered to FS1 and C user to FS2. A and C are talking if B gets a call as Opensips do not know to which box B is registered It could FWD it to FS2, which will not work as B is registered to FS1. Am I right?
Rergards, Miha
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Anton Kvashenkin
-
Miha
-
Sherif Omran
-
Vik Killa