Ghost Sessions in CLI after a longterm test
Hi All, I ran some longer tests with FS 1.0.3 acting as an SBC. The test machine has the following specs: - Intel Quad Core Q9550 - 8GB RAM (far too much from what I saw) After 3 days running SIPP with 750 simultaneous calls (1500 channels) at 20cps mean (50cps max) and call duration of 35s, I stopped SIPP. In the CLI, using status command I got this: freeswitch@internal> status UP 0 years, 2 days, 22 hours, 48 minutes, 3 seconds, 859 milliseconds, 607 microseconds 15817560 session(s) since startup 22 session(s) 0/500 But when I use "show channels" or "show calls", I see nothing. So I'm wondering where are these 22 sessions ? FYI, FS has run flawlessly with 750 sim. calls with 25-30% free CPUs. Successful call --> 5271434 Failed call ---> 1554 (less than 0.03%) regards, rod. complete SIPP summary: ------------------------------ Scenario Screen -------- [1-9]: Change Screen -- Call-rate(length) Port Total-time Total-calls Remote-host 50.0(35000 ms)/1.000s 5060 254259.42 s 5273022 10.10.10.254:5060(UDP) 0 new calls during 0.856 s period 7 ms scheduler resolution 0 calls (limit 750) Peak was 750 calls, after 15 s 0 Running, 34 Paused, 0 Woken up 15544 out-of-call msg (discarded) 1 open sockets 9213070274 Total echo RTP pckts 1st stream 0.000 last period RTP rate (kB/s) 0 Total echo RTP pckts 2nd stream 0.000 last period RTP rate (kB/s) Messages Retrans Timeout Unexpected-Msg INVITE ----------> 5273022 0 0 100 <---------- 5273022 0 1554 180 <---------- 0 0 0 183 <---------- 0 0 0 200 <---------- E-RTD1 5271434 0 0 ACK ----------> 5271434 0 Pause [ 35.0s] 5271434 0 BYE ----------> 5271434 0 0 200 <---------- 5271434 0 0 ------------------------------ Test Terminated -------------------------------- ----------------------------- Statistics Screen ------- [1-9]: Change Screen -- Start Time | 2009-02-27 09:11:31 Last Reset Time | 2009-03-02 07:49:10 Current Time | 2009-03-02 07:49:11 -------------------------+---------------------------+-------------------------- Counter Name | Periodic value | Cumulative value -------------------------+---------------------------+-------------------------- Elapsed Time | 00:00:00:857 | 70:37:39:429 Call Rate | 0.000 cps | 20.739 cps -------------------------+---------------------------+-------------------------- Incoming call created | 0 | 0 OutGoing call created | 0 | 5273022 Total Call created | | 5273022 Current Call | 34 | -------------------------+---------------------------+-------------------------- Successful call | 0 | 5271434 Failed call | 0 | 1554 -------------------------+---------------------------+-------------------------- Response Time 1 | 00:00:00:000 | 00:00:00:240 Call Length | 38:32:13:386 | 00:00:36:131 ------------------------------ Test Terminated --------------------------------
Could you please post this to jira along with a thread apply all bt of a core file taken from the process with the stuck sessions. Mike On Mar 2, 2009, at 2:06 AM, rod wrote:
Hi All,
I ran some longer tests with FS 1.0.3 acting as an SBC. The test machine has the following specs: - Intel Quad Core Q9550 - 8GB RAM (far too much from what I saw)
After 3 days running SIPP with 750 simultaneous calls (1500 channels) at 20cps mean (50cps max) and call duration of 35s, I stopped SIPP.
In the CLI, using status command I got this:
freeswitch@internal> status UP 0 years, 2 days, 22 hours, 48 minutes, 3 seconds, 859 milliseconds, 607 microseconds 15817560 session(s) since startup 22 session(s) 0/500
But when I use "show channels" or "show calls", I see nothing. So I'm wondering where are these 22 sessions ?
FYI, FS has run flawlessly with 750 sim. calls with 25-30% free CPUs.
Successful call --> 5271434 Failed call ---> 1554 (less than 0.03%)
regards, rod.
complete SIPP summary:
------------------------------ Scenario Screen -------- [1-9]: Change Screen -- Call-rate(length) Port Total-time Total-calls Remote-host 50.0(35000 ms)/1.000s 5060 254259.42 s 5273022 10.10.10.254:5060(UDP)
0 new calls during 0.856 s period 7 ms scheduler resolution 0 calls (limit 750) Peak was 750 calls, after 15 s 0 Running, 34 Paused, 0 Woken up 15544 out-of-call msg (discarded) 1 open sockets 9213070274 Total echo RTP pckts 1st stream 0.000 last period RTP rate (kB/s) 0 Total echo RTP pckts 2nd stream 0.000 last period RTP rate (kB/s)
Messages Retrans Timeout Unexpected-Msg INVITE ----------> 5273022 0 0 100 <---------- 5273022 0 1554 180 <---------- 0 0 0 183 <---------- 0 0 0 200 <---------- E-RTD1 5271434 0 0 ACK ----------> 5271434 0 Pause [ 35.0s] 5271434 0 BYE ----------> 5271434 0 0 200 <---------- 5271434 0 0
------------------------------ Test Terminated --------------------------------
----------------------------- Statistics Screen ------- [1-9]: Change Screen -- Start Time | 2009-02-27 09:11:31 Last Reset Time | 2009-03-02 07:49:10 Current Time | 2009-03-02 07:49:11 -------------------------+--------------------------- +-------------------------- Counter Name | Periodic value | Cumulative value -------------------------+--------------------------- +-------------------------- Elapsed Time | 00:00:00:857 | 70:37:39:429 Call Rate | 0.000 cps | 20.739 cps -------------------------+--------------------------- +-------------------------- Incoming call created | 0 | 0 OutGoing call created | 0 | 5273022 Total Call created | | 5273022 Current Call | 34 | -------------------------+--------------------------- +-------------------------- Successful call | 0 | 5271434 Failed call | 0 | 1554 -------------------------+--------------------------- +-------------------------- Response Time 1 | 00:00:00:000 | 00:00:00:240 Call Length | 38:32:13:386 | 00:00:36:131 ------------------------------ Test Terminated --------------------------------
Hi Michael, I checked on wiki, is the following the good way to go (sorry I'm not very familiar with your debugging tool). $ gdb bin/freeswitch core.xxx bt bt full thread apply all bt thread apply all bt full If I understand well I have to rerun the tests, as I did not start FS using GDB. regards, rod Michael Jerris wrote:
Could you please post this to jira along with a thread apply all bt of a core file taken from the process with the stuck sessions.
Mike
On Mar 2, 2009, at 2:06 AM, rod wrote:
Hi All,
I ran some longer tests with FS 1.0.3 acting as an SBC. The test machine has the following specs: - Intel Quad Core Q9550 - 8GB RAM (far too much from what I saw)
After 3 days running SIPP with 750 simultaneous calls (1500 channels) at 20cps mean (50cps max) and call duration of 35s, I stopped SIPP.
In the CLI, using status command I got this:
freeswitch@internal> status UP 0 years, 2 days, 22 hours, 48 minutes, 3 seconds, 859 milliseconds, 607 microseconds 15817560 session(s) since startup 22 session(s) 0/500
But when I use "show channels" or "show calls", I see nothing. So I'm wondering where are these 22 sessions ?
FYI, FS has run flawlessly with 750 sim. calls with 25-30% free CPUs.
Successful call --> 5271434 Failed call ---> 1554 (less than 0.03%)
regards, rod.
complete SIPP summary:
------------------------------ Scenario Screen -------- [1-9]: Change Screen -- Call-rate(length) Port Total-time Total-calls Remote-host 50.0(35000 ms)/1.000s 5060 254259.42 s 5273022 10.10.10.254:5060(UDP)
0 new calls during 0.856 s period 7 ms scheduler resolution 0 calls (limit 750) Peak was 750 calls, after 15 s 0 Running, 34 Paused, 0 Woken up 15544 out-of-call msg (discarded) 1 open sockets 9213070274 Total echo RTP pckts 1st stream 0.000 last period RTP rate (kB/s) 0 Total echo RTP pckts 2nd stream 0.000 last period RTP rate (kB/s)
Messages Retrans Timeout Unexpected-Msg INVITE ----------> 5273022 0 0 100 <---------- 5273022 0 1554 180 <---------- 0 0 0 183 <---------- 0 0 0 200 <---------- E-RTD1 5271434 0 0 ACK ----------> 5271434 0 Pause [ 35.0s] 5271434 0 BYE ----------> 5271434 0 0 200 <---------- 5271434 0 0
------------------------------ Test Terminated --------------------------------
----------------------------- Statistics Screen ------- [1-9]: Change Screen -- Start Time | 2009-02-27 09:11:31 Last Reset Time | 2009-03-02 07:49:10 Current Time | 2009-03-02 07:49:11 -------------------------+--------------------------- +-------------------------- Counter Name | Periodic value | Cumulative value -------------------------+--------------------------- +-------------------------- Elapsed Time | 00:00:00:857 | 70:37:39:429 Call Rate | 0.000 cps | 20.739 cps -------------------------+--------------------------- +-------------------------- Incoming call created | 0 | 0 OutGoing call created | 0 | 5273022 Total Call created | | 5273022 Current Call | 34 | -------------------------+--------------------------- +-------------------------- Successful call | 0 | 5271434 Failed call | 0 | 1554 -------------------------+--------------------------- +-------------------------- Response Time 1 | 00:00:00:000 | 00:00:00:240 Call Length | 38:32:13:386 | 00:00:36:131 ------------------------------ Test Terminated --------------------------------
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yes, you may also link (or copy) the .gdbinit file found in the support-d folder to your home directory. This is going to enable some GDB macros written for FS. Once thats done you can do the following commands and include them too: list_sessions hash_it_str_x session_manager.session_table switch_core_session_t channel->state Its important to know that what you see in "show channels" and "show calls" is just a DB query to sqlite, Those commands will go directly in the core and list those sessions. Math On 3-Mar-09, at 2:07 AM, rod wrote:
Hi Michael,
I checked on wiki, is the following the good way to go (sorry I'm not very familiar with your debugging tool).
$ gdb bin/freeswitch core.xxx
bt bt full thread apply all bt thread apply all bt full
If I understand well I have to rerun the tests, as I did not start FS using GDB.
regards, rod
Michael Jerris wrote:
Could you please post this to jira along with a thread apply all bt of a core file taken from the process with the stuck sessions.
Mike
On Mar 2, 2009, at 2:06 AM, rod wrote:
Hi All,
I ran some longer tests with FS 1.0.3 acting as an SBC. The test machine has the following specs: - Intel Quad Core Q9550 - 8GB RAM (far too much from what I saw)
After 3 days running SIPP with 750 simultaneous calls (1500 channels) at 20cps mean (50cps max) and call duration of 35s, I stopped SIPP.
In the CLI, using status command I got this:
freeswitch@internal> status UP 0 years, 2 days, 22 hours, 48 minutes, 3 seconds, 859 milliseconds, 607 microseconds 15817560 session(s) since startup 22 session(s) 0/500
But when I use "show channels" or "show calls", I see nothing. So I'm wondering where are these 22 sessions ?
FYI, FS has run flawlessly with 750 sim. calls with 25-30% free CPUs.
Successful call --> 5271434 Failed call ---> 1554 (less than 0.03%)
regards, rod.
complete SIPP summary:
------------------------------ Scenario Screen -------- [1-9]: Change Screen -- Call-rate(length) Port Total-time Total-calls Remote-host 50.0(35000 ms)/1.000s 5060 254259.42 s 5273022 10.10.10.254:5060(UDP)
0 new calls during 0.856 s period 7 ms scheduler resolution 0 calls (limit 750) Peak was 750 calls, after 15 s 0 Running, 34 Paused, 0 Woken up 15544 out-of-call msg (discarded) 1 open sockets 9213070274 Total echo RTP pckts 1st stream 0.000 last period RTP rate (kB/s) 0 Total echo RTP pckts 2nd stream 0.000 last period RTP rate (kB/s)
Messages Retrans Timeout Unexpected-Msg INVITE ----------> 5273022 0 0 100 <---------- 5273022 0 1554 180 <---------- 0 0 0 183 <---------- 0 0 0 200 <---------- E-RTD1 5271434 0 0 ACK ----------> 5271434 0 Pause [ 35.0s] 5271434 0 BYE ----------> 5271434 0 0 200 <---------- 5271434 0 0
------------------------------ Test Terminated --------------------------------
----------------------------- Statistics Screen ------- [1-9]: Change Screen -- Start Time | 2009-02-27 09:11:31 Last Reset Time | 2009-03-02 07:49:10 Current Time | 2009-03-02 07:49:11 -------------------------+--------------------------- +-------------------------- Counter Name | Periodic value | Cumulative value -------------------------+--------------------------- +-------------------------- Elapsed Time | 00:00:00:857 | 70:37:39:429 Call Rate | 0.000 cps | 20.739 cps -------------------------+--------------------------- +-------------------------- Incoming call created | 0 | 0 OutGoing call created | 0 | 5273022 Total Call created | | 5273022 Current Call | 34 | -------------------------+--------------------------- +-------------------------- Successful call | 0 | 5271434 Failed call | 0 | 1554 -------------------------+--------------------------- +-------------------------- Response Time 1 | 00:00:00:000 | 00:00:00:240 Call Length | 38:32:13:386 | 00:00:36:131 ------------------------------ Test Terminated --------------------------------
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
and you may want to update and try trunk to make sure it's not fixed On Tue, Mar 3, 2009 at 1:56 AM, Mathieu Rene <mrene_lists@avgs.ca> wrote:
Yes, you may also link (or copy) the .gdbinit file found in the support-d folder to your home directory. This is going to enable some GDB macros written for FS.
Once thats done you can do the following commands and include them too:
list_sessions
hash_it_str_x session_manager.session_table switch_core_session_t channel->state
Its important to know that what you see in "show channels" and "show calls" is just a DB query to sqlite, Those commands will go directly in the core and list those sessions.
Math
On 3-Mar-09, at 2:07 AM, rod wrote:
Hi Michael,
I checked on wiki, is the following the good way to go (sorry I'm not very familiar with your debugging tool).
$ gdb bin/freeswitch core.xxx
bt bt full thread apply all bt thread apply all bt full
If I understand well I have to rerun the tests, as I did not start FS using GDB.
regards, rod
Michael Jerris wrote:
Could you please post this to jira along with a thread apply all bt of a core file taken from the process with the stuck sessions.
Mike
On Mar 2, 2009, at 2:06 AM, rod wrote:
Hi All,
I ran some longer tests with FS 1.0.3 acting as an SBC. The test machine has the following specs: - Intel Quad Core Q9550 - 8GB RAM (far too much from what I saw)
After 3 days running SIPP with 750 simultaneous calls (1500 channels) at 20cps mean (50cps max) and call duration of 35s, I stopped SIPP.
In the CLI, using status command I got this:
freeswitch@internal> status UP 0 years, 2 days, 22 hours, 48 minutes, 3 seconds, 859 milliseconds, 607 microseconds 15817560 session(s) since startup 22 session(s) 0/500
But when I use "show channels" or "show calls", I see nothing. So I'm wondering where are these 22 sessions ?
FYI, FS has run flawlessly with 750 sim. calls with 25-30% free CPUs.
Successful call --> 5271434 Failed call ---> 1554 (less than 0.03%)
regards, rod.
complete SIPP summary:
------------------------------ Scenario Screen -------- [1-9]: Change Screen -- Call-rate(length) Port Total-time Total-calls Remote-host 50.0(35000 ms)/1.000s 5060 254259.42 s 5273022 10.10.10.254:5060(UDP)
0 new calls during 0.856 s period 7 ms scheduler resolution 0 calls (limit 750) Peak was 750 calls, after 15 s 0 Running, 34 Paused, 0 Woken up 15544 out-of-call msg (discarded) 1 open sockets 9213070274 Total echo RTP pckts 1st stream 0.000 last period RTP rate (kB/s) 0 Total echo RTP pckts 2nd stream 0.000 last period RTP rate (kB/s)
Messages Retrans Timeout Unexpected-Msg INVITE ----------> 5273022 0 0 100 <---------- 5273022 0 1554 180 <---------- 0 0 0 183 <---------- 0 0 0 200 <---------- E-RTD1 5271434 0 0 ACK ----------> 5271434 0 Pause [ 35.0s] 5271434 0 BYE ----------> 5271434 0 0 200 <---------- 5271434 0 0
------------------------------ Test Terminated --------------------------------
----------------------------- Statistics Screen ------- [1-9]: Change Screen -- Start Time | 2009-02-27 09:11:31 Last Reset Time | 2009-03-02 07:49:10 Current Time | 2009-03-02 07:49:11 -------------------------+--------------------------- +-------------------------- Counter Name | Periodic value | Cumulative value -------------------------+--------------------------- +-------------------------- Elapsed Time | 00:00:00:857 | 70:37:39:429 Call Rate | 0.000 cps | 20.739 cps -------------------------+--------------------------- +-------------------------- Incoming call created | 0 | 0 OutGoing call created | 0 | 5273022 Total Call created | | 5273022 Current Call | 34 | -------------------------+--------------------------- +-------------------------- Successful call | 0 | 5271434 Failed call | 0 | 1554 -------------------------+--------------------------- +-------------------------- Response Time 1 | 00:00:00:000 | 00:00:00:240 Call Length | 38:32:13:386 | 00:00:36:131 ------------------------------ Test Terminated --------------------------------
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
Hi, I'm already trying this. I will update this thread next week. regards. Anthony Minessale wrote:
and you may want to update and try trunk to make sure it's not fixed
On Tue, Mar 3, 2009 at 1:56 AM, Mathieu Rene <mrene_lists@avgs.ca <mailto:mrene_lists@avgs.ca>> wrote:
Yes, you may also link (or copy) the .gdbinit file found in the support-d folder to your home directory. This is going to enable some GDB macros written for FS.
Once thats done you can do the following commands and include them too:
list_sessions
hash_it_str_x session_manager.session_table switch_core_session_t channel->state
Its important to know that what you see in "show channels" and "show calls" is just a DB query to sqlite, Those commands will go directly in the core and list those sessions.
Math
On 3-Mar-09, at 2:07 AM, rod wrote:
> Hi Michael, > > I checked on wiki, is the following the good way to go (sorry I'm not > very familiar with your debugging tool). > > $ gdb bin/freeswitch core.xxx > > bt > bt full > thread apply all bt > thread apply all bt full > > > If I understand well I have to rerun the tests, as I did not start FS > using GDB. > > regards, > rod > > > > > Michael Jerris wrote: >> Could you please post this to jira along with a thread apply all bt >> of >> a core file taken from the process with the stuck sessions. >> >> Mike >> >> On Mar 2, 2009, at 2:06 AM, rod wrote: >> >> >>> Hi All, >>> >>> I ran some longer tests with FS 1.0.3 acting as an SBC. >>> The test machine has the following specs: >>> - Intel Quad Core Q9550 >>> - 8GB RAM (far too much from what I saw) >>> >>> After 3 days running SIPP with 750 simultaneous calls (1500 >>> channels) at >>> 20cps mean (50cps max) and call duration of 35s, I stopped SIPP. >>> >>> In the CLI, using status command I got this: >>> >>> freeswitch@internal> status >>> UP 0 years, 2 days, 22 hours, 48 minutes, 3 seconds, 859 >>> milliseconds, >>> 607 microseconds >>> 15817560 session(s) since startup >>> 22 session(s) 0/500 >>> >>> But when I use "show channels" or "show calls", I see nothing. So >>> I'm >>> wondering where are these 22 sessions ? >>> >>> FYI, FS has run flawlessly with 750 sim. calls with 25-30% free >>> CPUs. >>> >>> Successful call --> 5271434 >>> Failed call ---> 1554 (less than 0.03%) >>> >>> regards, >>> rod. >>> >>> >>> >>> complete SIPP summary: >>> >>> ------------------------------ Scenario Screen -------- [1-9]: >>> Change >>> Screen -- >>> Call-rate(length) Port Total-time Total-calls Remote-host >>> 50.0(35000 ms)/1.000s 5060 254259.42 s 5273022 >>> 10.10.10.254:5060(UDP) >>> >>> 0 new calls during 0.856 s period 7 ms scheduler resolution >>> 0 calls (limit 750) Peak was 750 calls, after >>> 15 s >>> 0 Running, 34 Paused, 0 Woken up >>> 15544 out-of-call msg (discarded) >>> 1 open sockets >>> 9213070274 Total echo RTP pckts 1st stream 0.000 last period RTP >>> rate >>> (kB/s) >>> 0 Total echo RTP pckts 2nd stream 0.000 last period RTP rate >>> (kB/s) >>> >>> Messages Retrans Timeout >>> Unexpected-Msg >>> INVITE ----------> 5273022 0 0 >>> 100 <---------- 5273022 0 1554 >>> 180 <---------- 0 0 0 >>> 183 <---------- 0 0 0 >>> 200 <---------- E-RTD1 5271434 0 0 >>> ACK ----------> 5271434 0 >>> Pause [ 35.0s] 5271434 0 >>> BYE ----------> 5271434 0 0 >>> 200 <---------- 5271434 0 0 >>> >>> ------------------------------ Test Terminated >>> -------------------------------- >>> >>> >>> ----------------------------- Statistics Screen ------- [1-9]: >>> Change >>> Screen -- >>> Start Time | 2009-02-27 >>> 09:11:31 >>> Last Reset Time | 2009-03-02 >>> 07:49:10 >>> Current Time | 2009-03-02 >>> 07:49:11 >>> -------------------------+--------------------------- >>> +-------------------------- >>> Counter Name | Periodic value | Cumulative >>> value >>> -------------------------+--------------------------- >>> +-------------------------- >>> Elapsed Time | 00:00:00:857 | >>> 70:37:39:429 >>> Call Rate | 0.000 cps | 20.739 >>> cps >>> -------------------------+--------------------------- >>> +-------------------------- >>> Incoming call created | 0 | >>> 0 >>> OutGoing call created | 0 | >>> 5273022 >>> Total Call created | | >>> 5273022 >>> Current Call | 34 >>> | >>> -------------------------+--------------------------- >>> +-------------------------- >>> Successful call | 0 | >>> 5271434 >>> Failed call | 0 | >>> 1554 >>> -------------------------+--------------------------- >>> +-------------------------- >>> Response Time 1 | 00:00:00:000 | >>> 00:00:00:240 >>> Call Length | 38:32:13:386 | >>> 00:00:36:131 >>> ------------------------------ Test Terminated >>> -------------------------------- >>> >> >> >> _______________________________________________ >> Freeswitch-users mailing list >> Freeswitch-users@lists.freeswitch.org <mailto:Freeswitch-users@lists.freeswitch.org> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> >> > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users@lists.freeswitch.org <mailto:Freeswitch-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org <mailto:Freeswitch-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 <http://iax:guest@conference.freeswitch.org/888> googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400 ------------------------------------------------------------------------
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Anthony Minessale
-
Mathieu Rene
-
Michael Jerris
-
rod