Fwd: Change the signaling port after the ACK
I’d have to see the sip trace to answer this better… From the ladder diagram, i don’t see the ack looking any difference than the invite. The BYE is sent I assume to exactly where the contact tells us to send it to.
On May 12, 2017, at 10:46 AM, Joaquin Peral <j.peral@airenetworks.es> wrote:
Hi all, I have a special case, a user with a Cisco system. He uses the standard 5060 port but uses NAT. Everything is correct until send the ACK signaling and the port changes. Any ideas?
external cfg: <settings> <param name='dialplan' value='XML'/> <param name='user-agent-string' value='NP000'/> <param name='username' value='NP000' /> <param name='ext-sip-ip' value='auto'/> <param name='ext-rtp-ip' value='auto'/> <param name='rtp-ip' value='auto'/> <param name='sip-ip' value='auto'/> <param name='sip-port' value='5060'/> <param name='nonce-ttl' value='60'/> <param name='rtp-timeout-sec' value='300'/> <param name='rtp-hold-timeout-sec' value='1800'/> <param name='rtp-timer-name' value='soft'/> <param name='aggressive-nat-detection' value='True'/> <param name='NDLB-received-in-nat-reg-contact' value='False'/>
<param name='NDLB-broken-auth-hash' value='False'/> <param name='enable-timer' value='True'/> <param name='session-timeout' value='1800'/> <param name='apply-nat-acl' value='rfc1918'/> <param name='inbound-codec-prefs' value='PCMA,PCMU,G729'/> <param name='outbound-codec-prefs' value='PCMA,PCMU,G729'/> <param name='inbound-codec-negotiation' value='greedy'/> <param name='disable-transcoding' value='True'/> <param name='debug' value='0'/> <param name='rfc2833-pt' value='101'/> <param name='dtmf-duration' value='100'/> <param name='disable-register' value='False'/> <param name='challenge-realm' value='auto_from'/> <param name='auth-calls' value='True'/> <param name='log-auth-failures' value='True'/> <param name='context' value='public'/> <param name='apply-inbound-acl' value='domains'/> <!--<param name='inbound-late-negotiation' value='true'/>-->
<param name="pass-rfc2833" value="true"/> <param name='pass-callee-id' value='true'/> <param name='manage-presence' value='false'/> </settings>
-- [Joaquin Peral Cascales] Departamento de Telefonía 911090048 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
you most likely never want aggressive nat detection on. Turning it on in most situations is a sign you don't have other nat config correct, or simply thought it might be good. It should not be used unless absolutely required, which it rarely is. On Tue, May 16, 2017 at 9:40 AM Joaquin Peral <j.peral@airenetworks.es> wrote:
FS assumes that the user is doing NAT.
Solved with
<param name='aggressive-nat-detection' value='False'/>
in a new profile.
Thanks!
On 15/05/17 17:11, Michael Jerris wrote:
I’d have to see the sip trace to answer this better… From the ladder diagram, i don’t see the ack looking any difference than the invite. The BYE is sent I assume to exactly where the contact tells us to send it to.
On May 12, 2017, at 10:46 AM, Joaquin Peral <j.peral@airenetworks.es> wrote:
Hi all, I have a special case, a user with a Cisco system. He uses the standard 5060 port but uses NAT. Everything is correct until send the ACK signaling and the port changes. Any ideas?
external cfg: <settings> <param name='dialplan' value='XML'/> <param name='user-agent-string' value='NP000'/> <param name='username' value='NP000' /> <param name='ext-sip-ip' value='auto'/> <param name='ext-rtp-ip' value='auto'/> <param name='rtp-ip' value='auto'/> <param name='sip-ip' value='auto'/> <param name='sip-port' value='5060'/> <param name='nonce-ttl' value='60'/> <param name='rtp-timeout-sec' value='300'/> <param name='rtp-hold-timeout-sec' value='1800'/> <param name='rtp-timer-name' value='soft'/> <param name='aggressive-nat-detection' value='True'/> <param name='NDLB-received-in-nat-reg-contact' value='False'/>
<param name='NDLB-broken-auth-hash' value='False'/> <param name='enable-timer' value='True'/> <param name='session-timeout' value='1800'/> <param name='apply-nat-acl' value='rfc1918'/> <param name='inbound-codec-prefs' value='PCMA,PCMU,G729'/> <param name='outbound-codec-prefs' value='PCMA,PCMU,G729'/> <param name='inbound-codec-negotiation' value='greedy'/> <param name='disable-transcoding' value='True'/> <param name='debug' value='0'/> <param name='rfc2833-pt' value='101'/> <param name='dtmf-duration' value='100'/> <param name='disable-register' value='False'/> <param name='challenge-realm' value='auto_from'/> <param name='auth-calls' value='True'/> <param name='log-auth-failures' value='True'/> <param name='context' value='public'/> <param name='apply-inbound-acl' value='domains'/> <!--<param name='inbound-late-negotiation' value='true'/>-->
<param name="pass-rfc2833" value="true"/> <param name='pass-callee-id' value='true'/> <param name='manage-presence' value='false'/> </settings>
-- [Joaquin Peral Cascales] Departamento de Telefonía 911090048
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
-- [Joaquin Peral Cascales] Departamento de Telefonía 911090048
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I wonder on what case would it be required? (Never used it myself) On Tue, May 16, 2017 at 3:46 PM Michael Jerris <mike@jerris.com> wrote:
you most likely never want aggressive nat detection on. Turning it on in most situations is a sign you don't have other nat config correct, or simply thought it might be good. It should not be used unless absolutely required, which it rarely is.
On Tue, May 16, 2017 at 9:40 AM Joaquin Peral <j.peral@airenetworks.es> wrote:
FS assumes that the user is doing NAT.
Solved with
<param name='aggressive-nat-detection' value='False'/>
in a new profile.
Thanks!
On 15/05/17 17:11, Michael Jerris wrote:
I’d have to see the sip trace to answer this better… From the ladder diagram, i don’t see the ack looking any difference than the invite. The BYE is sent I assume to exactly where the contact tells us to send it to.
On May 12, 2017, at 10:46 AM, Joaquin Peral <j.peral@airenetworks.es> wrote:
Hi all, I have a special case, a user with a Cisco system. He uses the standard 5060 port but uses NAT. Everything is correct until send the ACK signaling and the port changes. Any ideas?
external cfg: <settings> <param name='dialplan' value='XML'/> <param name='user-agent-string' value='NP000'/> <param name='username' value='NP000' /> <param name='ext-sip-ip' value='auto'/> <param name='ext-rtp-ip' value='auto'/> <param name='rtp-ip' value='auto'/> <param name='sip-ip' value='auto'/> <param name='sip-port' value='5060'/> <param name='nonce-ttl' value='60'/> <param name='rtp-timeout-sec' value='300'/> <param name='rtp-hold-timeout-sec' value='1800'/> <param name='rtp-timer-name' value='soft'/> <param name='aggressive-nat-detection' value='True'/> <param name='NDLB-received-in-nat-reg-contact' value='False'/>
<param name='NDLB-broken-auth-hash' value='False'/> <param name='enable-timer' value='True'/> <param name='session-timeout' value='1800'/> <param name='apply-nat-acl' value='rfc1918'/> <param name='inbound-codec-prefs' value='PCMA,PCMU,G729'/> <param name='outbound-codec-prefs' value='PCMA,PCMU,G729'/> <param name='inbound-codec-negotiation' value='greedy'/> <param name='disable-transcoding' value='True'/> <param name='debug' value='0'/> <param name='rfc2833-pt' value='101'/> <param name='dtmf-duration' value='100'/> <param name='disable-register' value='False'/> <param name='challenge-realm' value='auto_from'/> <param name='auth-calls' value='True'/> <param name='log-auth-failures' value='True'/> <param name='context' value='public'/> <param name='apply-inbound-acl' value='domains'/> <!--<param name='inbound-late-negotiation' value='true'/>-->
<param name="pass-rfc2833" value="true"/> <param name='pass-callee-id' value='true'/> <param name='manage-presence' value='false'/> </settings>
-- [Joaquin Peral Cascales] Departamento de Telefonía 911090048
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
-- [Joaquin Peral Cascales] Departamento de Telefonía 911090048
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
David Villasmil
-
Joaquin Peral
-
Michael Jerris