Nokia SIP clients: share your working config?
I have a pretty basic setup where many nokia sip clients (user agent: Nokia-SIPUA) behind different home NATs need to connect to a publicly accessible IP address running Freeswitch (freeswitch is then connected to SIP trunks and either routes the calls between handsets or outbound to the PSTN). I'm wondering if anyone could share their configurations for getting this to work *well*. I never really got it working well enough to be considered production quality on Asterisk but was hoping that someone had gone through some learning that would save me some debugging hours. Ideally I'm looking for a combination of client configuration options and server configuration that works well together - like should I use the IP address of the server on the client or a DNS name? And whats the best way to configure Freeswitch to make like easier for a random sip-capable Nokia handset to connect to freeswitch. Could anyone post working freeswitch configurations before I start on what turned out to be an endless and ultimately unsuccessful pursuit in Asterisk-land? S. -- Simon Tennant _____________________________________________ fixed: .uk +44 20 7043 6756 .de +49 89 420 955 854 mob: .uk +44 78 5335 6047 .de +49 17 8545 0880 xmpp: simon@buddycloud.com
I have used a Nokia 6300i (SIP client) with asterisk without problems. With FreeSWITCH i have some problem (i think NAT problem) but i can make and receive calls. When i will have time i will write a post in the wiki. Bye
I would really appreciate this. Some of the problems I have been unable to solve are: * inbound callerid presentation. SIP inbound to nokia have "0123456" (quotes included) instead of just a number that would then be matched with a phone book entry to display the name of the caller. * random call drop-outs (am debugging on the wifi ap at the moment) * intermittent NAT one-way audio problems S. bakko wrote:
I have used a Nokia 6300i (SIP client) with asterisk without problems.
With FreeSWITCH i have some problem (i think NAT problem) but i can make and receive calls.
When i will have time i will write a post in the wiki.
Bye
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Simon Tennant _____________________________________________ fixed: .uk +44 20 7043 6756 .de +49 89 420 955 854 mob: .uk +44 78 5335 6047 .de +49 17 8545 0880 xmpp: simon@buddycloud.com
I just installing FS in my new server. When i can make tests y will write you. Regards
On Sun, May 24, 2009 at 8:17 PM, bakko <asannucci@gmail.com> wrote:
I just installing FS in my new server. When i can make tests y will write you.
bakko: its really quite simple ... and should work straight out of the box first install your server - http://wiki.freeswitch.org/wiki/Installation_Guide then get started using the - http://wiki.freeswitch.org/wiki/Getting_Started_Guide then configure Nokia - http://wiki.freeswitch.org/wiki/Nokia_N95 -- wasim h. baig | principal consultant | convergence pk | +92 300 8508070 | peace be upon you ...
...actually it's not "quite simple". Nokia handsets have a myriad of other options that help fine tune things like STUN server resolution and are only editable after installing some nokia supplied software. We've gone through all those steps and still calls will fail for odd reasons or more than one handset cannot access another handset behind the same NAT. Or handsets will have STUN resolution problems or caller-id problems. /me wishes SNOM made mobiles. S. Wasim Baig wrote:
On Sun, May 24, 2009 at 8:17 PM, bakko <asannucci@gmail.com <mailto:asannucci@gmail.com>> wrote:
I just installing FS in my new server. When i can make tests y will write you.
bakko:
its really quite simple ... and should work straight out of the box
first install your server - http://wiki.freeswitch.org/wiki/Installation_Guide then get started using the - http://wiki.freeswitch.org/wiki/Getting_Started_Guide then configure Nokia - http://wiki.freeswitch.org/wiki/Nokia_N95
-- wasim h. baig | principal consultant | convergence pk | +92 300 8508070 | peace be upon you ... ------------------------------------------------------------------------
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Simon Tennant _____________________________________________ fixed: .uk +44 20 7043 6756 .de +49 89 420 955 854 mob: .uk +44 78 5335 6047 .de +49 17 8545 0880 xmpp: simon@buddycloud.com
On Mon, May 25, 2009 at 4:13 PM, Simon Tennant <simon@imaginator.com> wrote:
...actually it's not "quite simple". Nokia handsets have a myriad of other options that help fine tune things like STUN server resolution and are only editable after installing some nokia supplied software.
concur, but those are related to Nokia, and would affect any softswitch beyond the nat ... not just fs We've gone through all those steps and still calls will fail for odd
reasons or more than one handset cannot access another handset behind the same NAT. Or handsets will have STUN resolution problems or caller-id problems.
my original point of it being simple was under the caveat of a simple setup, same lan, default configs, works out of the box ...
/me wishes SNOM made mobiles.
indeed ... -- wasim h. baig | principal consultant | convergence pk | +92 300 8508070 | peace be upon you ...
Thank you, but with nokia 6300i i have to configure manualy the xml configuration file and then upload it tu my cellphone :) Regards
participants (3)
-
bakko
-
Simon Tennant
-
Wasim Baig