-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there Soon the Raspberry Pis will be available and I'm planning to buy a bunch of them. I think with a 4GB SD Card, ethernet port and 2x USB port it should be fine. However in one office that I plan on setting up FS is still ISDN being used. There are no plans on changing to VoIP however having an internal FS system would be nice. My question is, how can I hookup the Raspberry Pi to the ISDN lines. I guess I'd need some USB<->ISDN Adapter. The only thing I could find this far were USB ISDN modems. But modems are for data transmission and not voice - at least that's what I think. So, any of you have suggestions how I can hook up the Raspberry Pi to ISDN? Thx Stephan -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk8EYAEACgkQ9KcSxJrwrxgIjgCfaMa4sYLN1TD17+YMXd7WY0YW /CUAnAgPR6v0Dr2RhM7D9aWhO5770wST =m666 -----END PGP SIGNATURE-----
On 04-01-12 15:19, lists.freeswitch.org@sjau.ch wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi there
Soon the Raspberry Pis will be available and I'm planning to buy a bunch of them. I think with a 4GB SD Card, ethernet port and 2x USB port it should be fine.
However in one office that I plan on setting up FS is still ISDN being used. There are no plans on changing to VoIP however having an internal FS system would be nice.
My question is, how can I hookup the Raspberry Pi to the ISDN lines. I guess I'd need some USB<->ISDN Adapter. The only thing I could find this far were USB ISDN modems. But modems are for data transmission and not voice - at least that's what I think.
So, any of you have suggestions how I can hook up the Raspberry Pi to
How about a beroNet gateway? http://www.beronet.com/product/berofix-gateways/ You did not mention if the office uses BRI or PRI lines. There used to be cheap USB HFC chipset based ISDN BRI (not PRI) Terminal Adapters (e.g. Billion tinyUSB ISDN TA 128k) but they don't seem available anymore. Afaik FreeSWITCH does not support them (a HFC BRI/PRI module would be cool) but they should work with the latest dahdi+zaphfc patch/libpri/asterisk or mISDN/lcr/asterisk. Thinking of it maybe you could make lcr talk to FreeSWITCH but I never investigated that. Regards, Patrick
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I think it's BRI. Right now we can only have 4 incoming/outgoing calls. So I think it's 2 BRI Lines with 2 channels each. But how to find out for sure? Well, I'd prefer fully going the VoIP route but the others are sceptical. As for the rest, I'm completely lost. What's HFC? From what I read on the FS wiki there are ISDN modules: http://wiki.freeswitch.org/wiki/FreeTDM#ISDN_Modules . Would those help somehow? Thanks for the reply Stephan On 01/04/2012 06:23 PM, Patrick Lists wrote:
You did not mention if the office uses BRI or PRI lines. There used to be cheap USB HFC chipset based ISDN BRI (not PRI) Terminal Adapters (e.g. Billion tinyUSB ISDN TA 128k) but they don't seem available anymore. Afaik FreeSWITCH does not support them (a HFC BRI/PRI module would be cool) but they should work with the latest dahdi+zaphfc patch/libpri/asterisk or mISDN/lcr/asterisk. Thinking of it maybe you could make lcr talk to FreeSWITCH but I never investigated that.
Regards, Patrick
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk8EjhEACgkQ9KcSxJrwrxgNDwCcCkNRNbHDusPWYkXY7tkLpsqe 9acAnRTrpjepL1IoNmO/T76DqeVlGa6h =vvrx -----END PGP SIGNATURE-----
Please do not top post. On 04-01-12 18:36, lists.freeswitch.org@sjau.ch wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
I think it's BRI. Right now we can only have 4 incoming/outgoing calls. So I think it's 2 BRI Lines with 2 channels each.
But how to find out for sure?
Check the invoice or the actual phone setup?
Well, I'd prefer fully going the VoIP route but the others are sceptical.
As for the rest, I'm completely lost. What's HFC? From what I read on
HFC is an ISDN chipset made by Cologne http://www.colognechip.com
the FS wiki there are ISDN modules: http://wiki.freeswitch.org/wiki/FreeTDM#ISDN_Modules . Would those help somehow?
Sangoma ISDN module is for Sangoma products which it clearly mentions on the wiki ("only supported with Sangoma cards"). If you have no experience with/knowledge of integrating ISDN into FreeSWITCH and/or Asterisk then you may be better off with something like a beroNet gateway or hire a Consultant. Regards, Patrick
A better choice would be to get a T1-E1 interface card over USB. What if we can use the GPIO pins? On 2012-01-04 9:24 AM, "Patrick Lists" <freeswitch-list@puzzled.xs4all.nl> wrote:
On 04-01-12 15:19, lists.freeswitch.org@sjau.ch wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi there
Soon the Raspberry Pis will be available and I'm planning to buy a bunch of them. I think with a 4GB SD Card, ethernet port and 2x USB port it should be fine.
However in one office that I plan on setting up FS is still ISDN being used. There are no plans on changing to VoIP however having an internal FS system would be nice.
My question is, how can I hookup the Raspberry Pi to the ISDN lines. I guess I'd need some USB<->ISDN Adapter. The only thing I could find this far were USB ISDN modems. But modems are for data transmission and not voice - at least that's what I think.
So, any of you have suggestions how I can hook up the Raspberry Pi to
How about a beroNet gateway? http://www.beronet.com/product/berofix-gateways/
You did not mention if the office uses BRI or PRI lines. There used to be cheap USB HFC chipset based ISDN BRI (not PRI) Terminal Adapters (e.g. Billion tinyUSB ISDN TA 128k) but they don't seem available anymore. Afaik FreeSWITCH does not support them (a HFC BRI/PRI module would be cool) but they should work with the latest dahdi+zaphfc patch/libpri/asterisk or mISDN/lcr/asterisk. Thinking of it maybe you could make lcr talk to FreeSWITCH but I never investigated that.
Regards, Patrick
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
They got BRI, almost for sure. Try to look into Fritz products, or other German products, they're very strong on BRI. Maybe an embedded BRI<->SIP gateway will fit nicely your bill. -giovanni On Wed, Jan 4, 2012 at 6:37 PM, curriegrad2004 <curriegrad2004@gmail.com> wrote:
A better choice would be to get a T1-E1 interface card over USB. What if we can use the GPIO pins?
On 2012-01-04 9:24 AM, "Patrick Lists" <freeswitch-list@puzzled.xs4all.nl> wrote:
On 04-01-12 15:19, lists.freeswitch.org@sjau.ch wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi there
Soon the Raspberry Pis will be available and I'm planning to buy a bunch of them. I think with a 4GB SD Card, ethernet port and 2x USB port it should be fine.
However in one office that I plan on setting up FS is still ISDN being used. There are no plans on changing to VoIP however having an internal FS system would be nice.
My question is, how can I hookup the Raspberry Pi to the ISDN lines. I guess I'd need some USB<->ISDN Adapter. The only thing I could find this far were USB ISDN modems. But modems are for data transmission and not voice - at least that's what I think.
So, any of you have suggestions how I can hook up the Raspberry Pi to
How about a beroNet gateway? http://www.beronet.com/product/berofix-gateways/
You did not mention if the office uses BRI or PRI lines. There used to be cheap USB HFC chipset based ISDN BRI (not PRI) Terminal Adapters (e.g. Billion tinyUSB ISDN TA 128k) but they don't seem available anymore. Afaik FreeSWITCH does not support them (a HFC BRI/PRI module would be cool) but they should work with the latest dahdi+zaphfc patch/libpri/asterisk or mISDN/lcr/asterisk. Thinking of it maybe you could make lcr talk to FreeSWITCH but I never investigated that.
Regards, Patrick
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Addon: How would I connect the berofix gateway to the raspberry pi board? Btw, I just search a bit for usb isdn 128 TAs and I came accross a Minivigor 128 ( http://www.draytek.de/produkte/archiv/minivigor128.html ). Could that work? I could try to obtain such a device and give SSH access to interested parties. Stephan On 01/04/2012 06:23 PM, Patrick Lists wrote:
How about a beroNet gateway? http://www.beronet.com/product/berofix-gateways/
You did not mention if the office uses BRI or PRI lines. There used to be cheap USB HFC chipset based ISDN BRI (not PRI) Terminal Adapters (e.g. Billion tinyUSB ISDN TA 128k) but they don't seem available anymore. Afaik FreeSWITCH does not support them (a HFC BRI/PRI module would be cool) but they should work with the latest dahdi+zaphfc patch/libpri/asterisk or mISDN/lcr/asterisk. Thinking of it maybe you could make lcr talk to FreeSWITCH but I never investigated that.
Regards, Patrick -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk8ElhsACgkQ9KcSxJrwrxj1AgCgw0QxWqGoDlrM0KpRewQvNINJ ohsAn0IgWmDOrbBh3oGoace9WME/lZzt =bnGq -----END PGP SIGNATURE-----
He Stephan, As far as I know, these devices are normally connected via ethernet. The gateways of Patton Inalp (aka "Smartnode") are also great. Georg
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Addon: How would I connect the berofix gateway to the raspberry pi board?
Btw, I just search a bit for usb isdn 128 TAs and I came accross a Minivigor 128 ( http://www.draytek.de/produkte/archiv/minivigor128.html ). Could that work?
I could try to obtain such a device and give SSH access to interested parties.
Stephan
On 01/04/2012 06:23 PM, Patrick Lists wrote:
How about a beroNet gateway? http://www.beronet.com/product/berofix-gateways/
You did not mention if the office uses BRI or PRI lines. There used to be cheap USB HFC chipset based ISDN BRI (not PRI) Terminal Adapters (e.g. Billion tinyUSB ISDN TA 128k) but they don't seem available anymore. Afaik FreeSWITCH does not support them (a HFC BRI/PRI module would be cool) but they should work with the latest dahdi+zaphfc patch/libpri/asterisk or mISDN/lcr/asterisk. Thinking of it maybe you could make lcr talk to FreeSWITCH but I never investigated that.
Regards, Patrick -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk8ElhsACgkQ9KcSxJrwrxj1AgCgw0QxWqGoDlrM0KpRewQvNINJ ohsAn0IgWmDOrbBh3oGoace9WME/lZzt =bnGq -----END PGP SIGNATURE-----
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Georg I see.... well, they kinda defeat the purpose of a Raspberry Pi. Instead of buying a Beronet box I could just make a full PC instead. The beauty of the Raspberry Pi lies in it's size, pricetag and power consumption. Thanks for your explanation. Stephan On 01/04/2012 07:15 PM, georg@riseup.net wrote:
He Stephan,
As far as I know, these devices are normally connected via ethernet. The gateways of Patton Inalp (aka "Smartnode") are also great.
Georg -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk8EmmoACgkQ9KcSxJrwrxgERgCZAa/KE7XHszqAbOepIGnB38KI yaQAn0DVXwSo4OXVlzehr+CDpEZ2UYa2 =dwxa -----END PGP SIGNATURE-----
Please do not top post. On 04-01-12 19:10, lists.freeswitch.org@sjau.ch wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Addon: How would I connect the berofix gateway to the raspberry pi board?
You would use a LAN connection.
Btw, I just search a bit for usb isdn 128 TAs and I came accross a Minivigor 128 ( http://www.draytek.de/produkte/archiv/minivigor128.html ). Could that work?
If it has a HFC chipset then yes. If not then no. Call Draytek and find out.
I could try to obtain such a device and give SSH access to interested parties.
If you want to hire a Consultant then contact the FreeSWITCH developer team (I have no affiliation). Email consulting@freeswitch.org or call +1-918-420-9266 or tollfree +1-877-742-2583. Regards. Patrick
participants (5)
-
curriegrad2004
-
georg＠riseup.net
-
Giovanni Maruzzelli
-
lists.freeswitch.org＠sjau.ch
-
Patrick Lists