Re: [Freeswitch-users] Configuring Sangoma U100
I'm new to FS, and experimenting with it on a constrained environment (PCEngines ALIX board running Voyage Linux 0.62).
So far, FS has compiled fine, and I can register multiple softphones and make calls between them, but I'm lost at how to configure a Sangoma U100 so I can make and receive calls over an analogue line.
I've installed the wanpipe drivers (3.5.4) from Sangoma, and the wanrouter utility detects the USB device, and I've compiled it to support the TDM API.
FS was compiled with the Openzap module - as best as I can tell.
I thought that I would be able to use the wancfg_tdmapi utility to configure the /etc/wanpipe/wanpipe1.conf and then use the generated configuration file as the basis for configuring autoload_configs/ openzap.conf.xml.
try wancfg_fs
Thanks for the suggestion Michael, but the same result occurs as when I try wancfg_tdmapi, ie: "No Sangoma voice compatible cards found/configured"
However, the wancfg utility doesn't generate the wanpipe1.conf, and I'm stumped.
Any pointers would be much appreciated.
What is the output of wantouter hwprobe? On Aug 3, 2009, at 3:12 AM, Merul Patel <merul@mac.com> wrote:
I'm new to FS, and experimenting with it on a constrained environment (PCEngines ALIX board running Voyage Linux 0.62).
So far, FS has compiled fine, and I can register multiple softphones and make calls between them, but I'm lost at how to configure a Sangoma U100 so I can make and receive calls over an analogue line.
I've installed the wanpipe drivers (3.5.4) from Sangoma, and the wanrouter utility detects the USB device, and I've compiled it to support the TDM API.
FS was compiled with the Openzap module - as best as I can tell.
I thought that I would be able to use the wancfg_tdmapi utility to configure the /etc/wanpipe/wanpipe1.conf and then use the generated configuration file as the basis for configuring autoload_configs/ openzap.conf.xml.
try wancfg_fs
Thanks for the suggestion Michael, but the same result occurs as when I try wancfg_tdmapi, ie:
"No Sangoma voice compatible cards found/configured"
However, the wancfg utility doesn't generate the wanpipe1.conf, and I'm stumped.
Any pointers would be much appreciated.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (2)
-
Merul Patel
-
Michael Jerris