Hey Anthony

Thx for ur help again. I did use the extension you provided and I did set console to debug mode. Adding to that I do have sip and dingaling in debug mode and sip trace set to on in the outbound.xml so if a call is triggered to SIP I can see it immediately. However I doubt that the jingle call is transformed to SIP. The trace for a call is

I saw a lot of

2008-04-14 13:06:11 [DEBUG] libdingaling.c:448 parse_session_code() Duplicate Pref!

And at the end there was

· 2008-04-14 13:06:21 [DEBUG] switch_channel.c:1355 switch_channel_perform_hangup() Kill DingaLing/new [KILL]

· 2008-04-14 13:06:21 [DEBUG] libdingaling.c:284 ldl_session_destroy() Destroyed Session 1747058827

But not SIP traces

Can you please take a look at it Anthony ?

Thx

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale
Sent: Monday, April 14, 2008 5:00 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Dingaling In Component Mode "How ToCallJingleTo SIP"

Try this:

If you issue "console loglevel debug" first on the cli you should see what the call is doing.

</condition>

</extension>

On Mon, Apr 14, 2008 at 8:45 AM, Ali Jawad <ali.jawad@splendor.net> wrote:

I did that and I do have a user online called ext+1000 and I do have a route setup as follows in my dialplan "This is the first route"

</condition>

</extension>

And I do have a gateway called c5gateway so as per this extension all incoming calls should pass here right ?

This works in gtalk, did I miss something here ?

Thanks Anthony for your help. I really would like to get this working..my client is jabbin by the way.

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale
Sent: Monday, April 14, 2008 4:33 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Dingaling In Component Mode "How To CallJingleTo SIP"

The easiest way to do it in component mode is to use the special ext name space which has a permanent active status.
Add ext+1234@mydomain.com to your buddy list. if this leads to FreeSWITCH component it will automatically add the buddy and mark
it active at all times. Then when you call this id it will hit the dial plan with the exact string ext+1234@mydomain.com as the destination number which you can parse with regex and route to sip.

On Mon, Apr 14, 2008 at 1:30 AM, Ali Jawad <ali.jawad@splendor.net> wrote:

Dear All

This might be a duplicate post, I am sorry if it is. Normally I get direct feedback from the list. But this time I did not get any reply. So I was afraid it might not have been delivered.

First I would like to state that dingaling is working in client mode with gtalk perfectly. I can call from gtalk to my sip extension "1000". I have setup component mode now I am using FS with Openfire, open does show the following:

1 fs.jabber2.mydomain.net LibDingaLing gateway

However stats on the jabber server are Session Statistics: Packets Received/Sent: 1/1

So the component is REGISTERED, so far so good my problem now is how to initiate a call from XMPP to a SIP extension. Using client mode I would do the following:

Setup GTALK account and assign extension to it
Login with another gtalk account and dial the first gtalk account
The assigned extension rings

I don't know how to do the same using component mode. Adding sip+1000@mydomain to the jabber client "Jabbin" does not popup an "add contact" on XTEN.

Anything I missed here ?

Thanks for any hints or suggestions

The Freeswitch server logs are below:

2008-04-11 13:57:32 [NOTICE] libdingaling.c:1276 on_log() SEND:

-------------------------------------------------------------------------------

<stream:stream xmlns:stream="http://etherx.jabber.org/streams" xmlns="jabber:component:accept" to="fs" version="1.0"></stream:stream>

2008-04-11 13:57:32 [INFO] libdingaling.c:1274 on_log() RECV:

-------------------------------------------------------------------------------

<stream:stream xmlns:stream="http://etherx.jabber.org/streams" xmlns="jabber:component:accept" from="fs.jabber2.MyDomain" id="69fcaa7b"></stream:stream>

2008-04-11 13:57:32 [NOTICE] libdingaling.c:1276 on_log() SEND:

-------------------------------------------------------------------------------

<handshake>72dac833190326bb82dddedae558b2b794df5e1b</handshake>

2008-04-11 13:57:32 [INFO] libdingaling.c:1274 on_log() RECV:

-------------------------------------------------------------------------------

2008-04-11 13:57:32 [INFO] libdingaling.c:1274 on_log() RECV:

-------------------------------------------------------------------------------

</iq>

2008-04-11 13:57:32 [NOTICE] libdingaling.c:1276 on_log() SEND:

-------------------------------------------------------------------------------

</query>

</iq>

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/

AIM: anthm
MSN:anthony_minessale@hotmail.com
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org
iax:guest@conference.freeswitch.org/888
googletalk:conf+888@conference.freeswitch.org
pstn:213-799-1400

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.