Hi All,
Just to make sure I am correct, the profile that SIP trunks register is the external profile, and that profile is listening on :5080?
When I try to call in, on the firewall I see the sip provider sourceip:5060-> destinationip:5080 being forwarded to the box. When I run a tcpdump port 5080 on the box I see nothing hitting it.
root@PBX:/home/pbxadmin# tcpdump port 5080
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
any ideas?
Thanks, Jackson Fisher
Jackson Fisher | Network Engineer | 02 6162 0070 | Jackson@forwardit.com.au
-----Original Message-----
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of William King
Sent: Tuesday, 16 June 2015 10:12 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Freeswitch NAT bahind PFSENSE no inbound calls hitting FS_CLI
Siptrace on the FS box would be the next step. Check confluence for the command line syntax for tcpdump.
William King
Senior Engineer
Quentus Technologies, INC
1037 NE 65th St Suite 273
Seattle, WA 98115
Main: (877) 211-9337
Office: (206) 388-4772
Cell: (253) 686-5518
On 6/15/15 4:51 PM, Jackson Fisher - Forward.IT wrote:
> Hi Moishe,
>
>
>
> Thank you for replying. I have issued the command “sofia profile
> external start” and the service starts successfully, there is no
> iptables installed on the box (debian 7) and I am confident that
> tcp/udp
> 5060-5080 are being forwarded correctly.
>
>
>
> I am tearing my hair out with this one any assistance is greatly
> appreciated.
>
>
>
>
>
> Thanks, Jackson Fisher
>
>
>
> Email-signature.jpg
>
>
>
> * *
>
> *Jackson Fisher* | Network Engineer | 02 6162 0070 |
> _Jackson@forwardit.com.au <mailto:Jackson@forwardit.com.au>_
>
>
>
>
>
> *From:*freeswitch-users-bounces@lists.freeswitch.org
> [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of
> *Moishe Grunstein
> *Sent:* Tuesday, 16 June 2015 9:35 AM
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] Freeswitch NAT bahind PFSENSE no
> inbound calls hitting FS_CLI
>
>
>
> If you don’t see anything in fscli then it is not reaching Freeswitch,
> make sure the profile is started and listening on 5080, if it is the
> issue is outside of Freeswitch either your PFsense or IPtables.
>
>
>
> Thanks,
>
>
>
> Moishe Grunstein
>
> Tornado Computer Systems, Inc.
>
> 212.400.7650 888.IPPBX.US
> *Service Request Email:
support@nysolutions.com
> <mailto:support@nysolutions.com> *
>
> cid:image001.jpg@01C72F94.9EE45D60 <http://www.nysolutions.com/>
>
> Computer Networking * Managed Services * IP Video Surveillance *
> Network Assessments * Web Solutions * Voice over IP * Disaster
> Recovery * Network Security * Site Surveys * CMS
>
>
>
> *From:*freeswitch-users-bounces@lists.freeswitch.org
> <mailto:freeswitch-users-bounces@lists.freeswitch.org>
> [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of
> *Jackson Fisher - Forward.IT
> *Sent:* Monday, June 15, 2015 7:24 PM
> *To:*
freeswitch-users@lists.freeswitch.org
> <mailto:freeswitch-users@lists.freeswitch.org>
> *Subject:* [Freeswitch-users] Freeswitch NAT bahind PFSENSE no inbound
> calls hitting FS_CLI
>
>
>
> Hi All,
>
>
>
> I am having some issues with a Freeswitch install I am trying to stand
> up. Currently the Freeswitch server is sitting behind a PFsense
> firewall, I have 5060-5080 & 16384 – 32768 forwarded onto the box.
>
>
>
> Sip trunk is registering fine and outbound call work without issue,
> however when I call inbound I see the SIP invite cross the firewall
> destined for :5080 but in fs_cli with external siptrace on I do not
> see any calls connecting.
>
>
>
> Trunk is internode nodephone, and I have set it up following the
> freeswitch guide.
>
>
>
> My end goal is to set up a Multi-tennant system, if that makes a
> difference to any of the config.
>
>
>
> I am pretty new to freeswitch so if anybody could give me any pointers
> on where to start that would be fantastic.
>
>
>
>
>
>
>
>
>
> Thanks, Jackson Fisher
>
>
>
>
>
>
>
> Email-signature.jpg
>
>
>
> *Jackson Fisher** *|* *Network Engineer
>
>
>
> A: Level 1 - Unit 8, 55-57 Lathlain Street, Belconnen ACT 2617
>
> P :(02) 6162 0070
>
> E :*Jackson@forwardit.com.au <mailto:Jackson@forwardit.com.au>*
>
> W :*http://www.forwardit.com.au* <http://www.forwardit.com.au/>
>
>
>
>
>
>
>
> ----------------------------------------------------------------------
> --
>
>
> Spam
> Phish/Fraud
> Not spam
> Forget previous vote
>
>
>
> ______________________________________________________________________
> ___ Professional FreeSWITCH Consulting Services:
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://confluence.freeswitch.org
>
> FreeSWITCH-users mailing list
>
FreeSWITCH-users@lists.freeswitch.org
>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
> rs
>
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://confluence.freeswitch.org
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
--
BEGIN-ANTISPAM-VOTING-LINKS
------------------------------------------------------
Teach CanIt if this mail (ID 02OEMeiua) is spam:
Spam:
https://antispam.roaringpenguin.com/canit/b.php?i=02OEMeiua&m=edab584281f2&t=20150615&c=s
Fraud/Phish:
https://antispam.roaringpenguin.com/canit/b.php?i=02OEMeiua&m=edab584281f2&t=20150615&c=p
Not spam:
https://antispam.roaringpenguin.com/canit/b.php?i=02OEMeiua&m=edab584281f2&t=20150615&c=n
Forget vote:
https://antispam.roaringpenguin.com/canit/b.php?i=02OEMeiua&m=edab584281f2&t=20150615&c=f
------------------------------------------------------
END-ANTISPAM-VOTING-LINKS