Hi Delphini, all,

Thanks for the tip, I read the doc and it give me some tips but it is not what I need. My design would be

Phones---internet--> FREESWITCH ----- internal netw with public ips ---> network node

I need Freeswitch to pass registrations on to network node. That is very important since provisioning in a hell on that network and trying to reproduce it on freeswitch is out of the scope…

But I need Freeswitch to handle the location information, since The network would call the phones and this call need to pass through freeswitch and progress to the phones after changing the ips according to the top hiding.

In my case the phones are connecting through internet, they are on the “outside world”

Does it look like something do-able with Freeswitch?

Thanks again!!

Helena

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of A.B.Delphini (Dell) - CIO Asterisk Libre(tm)
Sent: viernes, 21 de marzo de 2014 15:58
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Freeswitch as A-SBC

Hello Helena,

I needed to do the same thing as you.

I used this article

http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc

Luck!

delphini
www.asterisklibre.org

_
°v° Asterisk Libre
/(_)\ http://www.asterisklibre.org/
^ ^
Seja livre, use Asterisk Puro!
--------------------------
Open Source \o/\o/ - Milhares de mentes abertas não podem estar enganadas!

Pense bem antes de imprimir
Você esta preservando a natureza, as árvores agradecem!

“A Vontade de Deus nunca irá levá-lo aonde a Graça dEle não possa protegê-lo"

*************** ATENÇÃO ***************

Ao re-encaminhar esta mensagem, por favor:

1. Apague o meu e-mail e o meu nome.

2. Apague também os endereços dos amigos antes de reenviar.

3. Encaminhe como cópia oculta (Cco ou Bcc) aos SEUS destinatários.

Agindo sempre assim dificultaremos a disseminação de vírus, spams e banners, e quem não quiser receber tantos e-mals avise-me não quero ser inconveniente.

Muito Obrigado

Suporte Delphini System™

2014-03-21 10:46 GMT-03:00 Helena Garcia-Nieto <helena.gnieto@morodo.co.uk>:

Hi All,

I am newbie at freeswitch but what I have read so far seems a great project!

I am interested on deploying a freeswitch used as Access SBC for a network.
I am still trying to outline the design but I'd like your advice about the
feasibility of doing all that with freeswitch in a more or less standard way
(since I still have to learn a lot about freeswitch) conditions would be
something like:

-TCP via public link with apps
-UDP via private link with current network

-pass registers and invites form apps to network to handle doing the top
hiding. ( that point is critical since all the provisioning process is too
complex to connect the "sbc" with that)
-receive invites from network to terminate on app
-receive invites from apps to deliver to the network

-anchoring media to solve audio problems due NAT. But no codec transcoding

My initial idea was to set the network in the internal profile and the
external accepting incoming messages from all apps.

I'll appreciate your comments on if that is easy for a newbie with
freeswitch. I'll keep reading the files and the info!!

Thanks in advanced

Helena

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org