---

CC: freeswitch-users@lists.freeswitch.org
From: steveayre@gmail.com
Date: Fri, 13 Jul 2012 13:30:38 +0100
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] One Way RTP (no NAT) - Freeswitch sends RTP to the remote source port instead of SDP negotiated destination port (with disable_rtp_auto_adjust=true)

We're testing a feature that requires an extra Application Server (B2BUA) on our call path, on the egress side of the call from FreeSwitch.
With the extra AS, we have only one-way RTP (Caller -> Callee). Without, RTP is fine.
We narrowed it down to FS enforcing symmetric RTP while AS only works with asymmetric RTP. We cannot change the behavior of the AS at this time.

Call:  

Caller - >NTW -> SBC -> FS -> AS -> SBC -> NTW -> Callee.


RTP streams, as negotiated (SDP):

Caller - > SBCOut:50460 ->FSIn:29526 -> FSOut:17818 -> ASIn:8080 -> ASOutB:19040 -> SBCOut:49162  -> Callee (can't hear a thing)

Callee  -> SBCOut:49162 ->ASIn:8082 -> ASOut:19000 -> FSIn:17818 -> FSOut:29526 -> SBCIn:50460 -> Caller (good RTP)

 

RTP streams, as sent/receiced:

FS negotiates 8080 as the RTP destination to AS in the "caller - > callee" direction. For about .5s, that's how the RTP flows : FSOut:17818 -> ASIn:8080
FS negotiates 19000 as the RTP source from AS in the "callee -> caller" direction. This is how the RTP flows for the duration of the call.: ASOut:19000 -> FSIn:17818
FS switches its RTP stream in the "caller - > callee" direction ~.5s into the call : FSOut:17818 -> ASIn:19000. [ASIn listens on 8080, the caller - > called RTP is dead.]

All this from Wireshark trace.

I tried the following, with no success:

1. Added to MyFSApp.xml and dialplan\public.xml:
    <action application="set" data="disable_rtp_auto_adjust=true"/>
    <action application="set" data="rtp_manual_rtp_bugs=accept_any_packets"/>
Restarted, FS, same result.

2. Commented out
<param name="ext-rtp-ip" value="auto-nat"/>
<param name="ext-sip-ip" value="auto-nat"/>
<param name="use-rtp-timer" value="true"/>
Restarted, FS, same result.

3. Started FS with -nonat, then nonatmap
Same result.

Other info :
- Our App on FS runs in B2BUA mode, doesn't proxy the call. We answers the incoming leg before initiating the outgoing leg. I can attach the Wireshark is I didn't provide enough info - I have both FS and AS pcaps.
- Our FS code about 2 weeks old.

What else can I try? Any other settings I can enable/disable? Can I enable extra RTP logs on FreeSwitch for debug?

Thanks,
A.C.

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

Join Us At ClueCon - Aug 7-9, 2012

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com Join Us At ClueCon - Aug 7-9, 2012 FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org