I will take a look at this today. What
OS/version are you using again?
Mike
From:
freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jason Steele
Sent: Friday, April 13, 2007 7:01
AM
To:
Subject: Re: [Freeswitch-users] My
first call
Jonas,
Thanks for your reply.
I checked that the system
at conference.freeswitch.org was up and running.
When you say “try
adding some actions” do you mean to the call plan for 1234?
During initialisation the
following is shown in the console:
Pa_GetDeviceInfo: Num
input channels reported as 65535! Changed to 2.
Pa_GetDeviceInfo: Num
input channels reported as 65535! Changed to 2.
Pa_GetDeviceInfo: Num
output channels reported as 65535! Changed to 2.
Pa_GetDeviceInfo: Num
output channels reported as 65535! Changed to 2.
And also:
2007-04-13 11:30:15 [ERR]
mod_portaudio.c:1030 load_config() Invalid ring device configured using output
device!
2007-04-13 11:30:15
[CONSOLE] switch_loadable_module.c:453 switch_loadable_module_load_file()
Successfully Loaded [mod_p
ortaudio]
2007-04-13 11:30:15
[DEBUG] mod_portaudio.c:895 switch_module_load() Input Device: 0, Output
Device: 3, Ring Device: 3 S
ample Rate: 8000 MS: 20
Do these look right?
Many thanks,
Jason
From: freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jonas Gauffin
Sent: 12 April 2007 15:43
To:
Subject: Re: [Freeswitch-users] My
first call
The default
dialplan will divert calls to the conference system at freeswitch.org.
that system may have been down when you tried.
try adding some actions which plays sound files instead. Action should be
" playback", and data
should be the full path to a wave file