Hi sparklezou,
Why are you repeating yourself? If my previous reply didn't fully answer
your questions you might at least reply to that and seek further help.
Regards,
Steve
On 04/11/2014 10:35 AM, sparklezou wrote:
> Hi All,
> I have reviewed the Mod spandsp wiki
> http://wiki.freeswitch.org/wiki/Mod_spandsp
> There is an example about T.38 FAX.
> *Samples*
>
> *Here is a working example using FreeSWITCH as a T.38-gateway. *
>
> *I used the following software and devices: *
>
> * *FAX_B: Infotec IF2100e *
> * *ATA_B: Cisco 186 v3.2.1 *
> * *FAX_A: RICOH FAX2000L (Super G3, 14.400 Baud) *
> * *ATA_A: Grandstream HandyTone 502 *
> o *Product model: HT-502 V1.2A *
> o *Firmware: Program-- 1.0.3.10 Bootloader-- 1.0.0.9 Core--
> 1.0.3.6 Base-- 1.0.3.8 *
> * *FreeSWITCH: git head of 2010-11-19 *
> * *PRI E1-Stack: openzap *
> * *Sangoma-Wanpipe: version 3.5.17 *
> * *TDM-Card: Sangoma A104d*
>
> My questions:
> 1. Is there any detail configuration manual for *RICOH FAX2000L? I
> could NOT find on google also.*
> **
> 2. I'm using RICHO MP2000. From the manual, seems it support T.38. But
> only could set account, NO password. Freeswitch could accept account
> without password? I also use Wireshark to catch the IP package. seems
> NO sip regiest info from the RICHO MP2000. Also NO very detail
> configuration manual from RICHO.
> 3. Here the T.38 could connect to Freeswitch without ATA or NOT? it's
> just in LAN?
> Thanks all!
> 2014-04-09
> ------------------------------------------------------------------------
> sparklezou
>