Hi, Tihomir
 
Have you rewriten your modules, especialy mod_radius?
If so - is it supports interrim updates and where we can get them from?
 
26.01.2011, 20:57, "Tihomir Culjaga" <tculjaga@gmail.com>:
points taken :=)


just updated to latest git, included the mod_xml_cdr modifications and i can recover the calls now. Thanks for your help.

anyhow, im going to move the functionalities to appropriate modules instead.



On Wed, Jan 26, 2011 at 8:20 PM, Steven Ayre <steveayre@gmail.com> wrote:
Tihomir,

Are you saying all of those are implemented in mod_xml_cdr?

If so, that's probably not the best place to implement them. They'd be better off in their own separate modules.


well, i have tested it with the original module ... don't wary about that :=) ... I always use default modules if i have issues to see the behaviour.
There's no reason it should work in a default module if it wouldn't work in its own.
- added radius accounting interface

There's already a module for this I believe?
http://wiki.freeswitch.org/wiki/Mod_radius_cdr

sorry to say that and pls don't get me wrong, but its not good ... and doesn't support adding  custom VSAs  (something as in mod_rad_auth).

Fair enough. If you think it can be improved post jira tickets requesting new features and possibly supplying patches to improve it.

 
- not the best place but

I don't agree with you here, mod_xml_cdr has already two interfaces (curl and fs) .. why not add radius and odbc as well ?
curl and fs are writing the same generated XML cdr content. The fs support is there partly to give the ability to store CDRs when the HTTP request fails so they can be resent later.
Radius and ODBC on the otherhand aren't XML, so it's an entirely different type of CDR. (Well, ODBC could be but it's probably not the best way to store it).

-Steve
 



On 26 January 2011 18:12, Tihomir Culjaga <tculjaga@gmail.com> wrote:


On Wed, Jan 26, 2011 at 4:34 PM, Steven Ayre <steveayre@gmail.com> wrote:
Tihomir,

Are you saying all of those are implemented in mod_xml_cdr?

If so, that's probably not the best place to implement them. They'd be better off in their own separate modules.


well, i have tested it with the original module ... don't wary about that :=) ... I always use default modules if i have issues to see the behaviour.

 
- added radius accounting interface

There's already a module for this I believe?
http://wiki.freeswitch.org/wiki/Mod_radius_cdr

sorry to say that and pls don't get me wrong, but its not good ... and doesn't support adding  custom VSAs  (something as in mod_rad_auth).

- added odbc cdr interface

This would be better in its own module.

- not the best place but

I don't agree with you here, mod_xml_cdr has already two interfaces (curl and fs) .. why not add radius and odbc as well ?


Of course i can move all of that in separate modules ... but why.. i look at that as additional interfaces where i can send the CDR.


LCR stuff is on the roadmap already... and i agree its has no place here.
 
  added a function to build up my dial-string... basically the same functionality of LCR module but much more simpler :=)
 
Indeed it's not, I don't see how CDRs and LCR is related.
This would be better as something like mod_custom_lcr. mod_lcr may well do what you need though with custom SQL.

Warm Regards,
-Steve





On 26 January 2011 14:03, Tihomir Culjaga <tculjaga@gmail.com> wrote:
patch for mod_xml_cdr

- added radius accounting interface
- added odbc cdr interface

- not the best place but
  added a function to build up my dial-string... basically the same functionality of LCR module but much more simpler :=)
 




On 26 January 2011 13:28, Steven Ayre <steveayre@gmail.com> wrote:
It shouldn't be hard to update them. Most interfaces haven't changed, and those that have won't have changed much. Any changes will show up as compile-time errors. If you wrote them in the first place then you'll be easily capable of updating them for the latest version.

If you have any patches that you think would be beneficial for the entire community you can share them on http://jira.freeswitch.org, then they'll get considered for adding to the trunk - what's the patch for?

Patches to trunk modules will always be easier for you to maintain if you can get them into trunk.

-Steve
 



On 26 January 2011 10:53, Tihomir Culjaga <tculjaga@gmail.com> wrote:
hello Anthony,

ya, i was afraid of that... this means moving all my modules & patches to the latest git...

radius cdr interface
odbc cdr interface

within mod_xml_cdr <= i can share this as a patch... if you are interested.


mod_say_hr - really bad programming .. needs big re-factoring but lack of time :(
patches for mod_say_de & mod_say_fr - because wrong playing in some scenarios

and some small stuff i made within mod_commands... anyhow this was on the road.


anyhow i was really into understanding the way the call context replication works... this may be the DB connection issue as the ODBC connection is reset on switchover (im switching entire resource .. floating IP, & database)


so what really happens is the FS on 2nd node just getting sessions from sip_recovery

from sofia_glue_recover: i see you are selecting sip_recovery table.


select * from sip_recovery;
runtime_uuid profile_name hostname uuid metadata  
24f77a1f-f315-4beb-904f-f779e8767c75 internal cxss01 102b2c7f-466f-4b6d-a795-e2cc25630e78    
24f77a1f-f315-4beb-904f-f779e8767c75 external cxss01 52834d99-c1be-4832-bee9-7ba05238871d    
 
 




so, what do you do afterward?


on the recovering node i see some portion of dialplan is executed and re-INVITEs being sent ... where do you get the DSP info for the recovering re-INVITE ?




thanks for your help,
Tihomir.
 





On Wed, Jan 26, 2011 at 1:12 AM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
There is an xml_cdr snapshot in sip_recovery sql table that contains
the data used for the recovery.
Also based on your logs, you are not using latest git.  I would try
that first before anything else.
 



On Tue, Jan 25, 2011 at 7:24 AM, Tihomir Culjaga <tculjaga@gmail.com> wrote:
> yap, both using the same config
>
>
> can you advice where is FS getting the SDP info for the re-INVITE ?
>
>
> On Tue, Jan 25, 2011 at 2:03 PM, Avi Marcus <avi@avimarcus.net> wrote:
>>
>> Are you using two machines for the HA? do both have the same configs?
>> -Avi
>>
>> On Tue, Jan 25, 2011 at 11:41 AM, Tihomir Culjaga <tculjaga@gmail.com>
>> wrote:
>> > Here is the debug: http://pastebin.freeswitch.org/15133
>> >
>> > i have set verbose_sdp=true in vars.xml as.
>> >   <X-PRE-PROCESS cmd="set" data="verbose_sdp=true"/>
>> >
>> > but not much to be seen of the verbose thing in the debug...
>> >
>> > Still, FS is sending a re-INVITE with wrong SDP. The call to be
>> > recovered is
>> > using ALAW... and ULAW is not supported.
>> > FS sends a re-INVITE with ULAW and CN in SDP. The re-INVITE is rejected
>> > due
>> > to incompatible SDP.
>> >
>> > Where does FS get the information for the SDP in re-INVITE message?
>> >
>> >
>> > please advice,
>> > T.
>> >
>> >
>> >
>> > On Tue, Jan 25, 2011 at 12:01 AM, Tihomir Culjaga <tculjaga@gmail.com>
>> > wrote:
>> >>
>> >> yap, i do have PCMA ... and the debug shows it correctly :=)
>> >>
>> >> i will try to see what it does with verbose. Post new debug tomorrow.
>> >>
>> >> ty.
>> >>
>> >>
>> >> On Mon, Jan 24, 2011 at 11:29 PM, Steven Ayre <steveayre@gmail.com>
>> >> wrote:
>> >>>
>> >>> Brian, it has PCMU in the sdp, but Sofia thinks it's setting PCMA?
>> >>>
>> >>> Steve on iPhone
>> >>>
>> >>> On 24 Jan 2011, at 20:17, Brian West <brian@freeswitch.org> wrote:
>> >>>
>> >>> > What makes you think that fails?  It has ULAW and CN in the codec
>> >>> > list!
>> >>> >  Sounds like you need the verbose sdp... set the global variable
>> >>> > "verbose_sdp=true"
>> >>> >
>> >>> > /b
>> >>> >
>> >>> > On Jan 24, 2011, at 1:50 PM, Tihomir Culjaga wrote:
>> >>> >
>> >>> >>
>> >>> >>
>> >>> >> i configured FS HA and looks like its trying to recover the call ..
>> >>> >> but the re-INVITE fails due to "wrong/missed" codec capability.
>> >>> >
>> >>> >
>> >>> > _______________________________________________
>> >>> > FreeSWITCH-users mailing list
>> >>> > FreeSWITCH-users@lists.freeswitch.org
>> >>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >>> >
>> >>> >
>> >>> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >>> > http://www.freeswitch.org
>> >>>
>> >>> _______________________________________________
>> >>> FreeSWITCH-users mailing list
>> >>> FreeSWITCH-users@lists.freeswitch.org
>> >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >>>
>> >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >>> http://www.freeswitch.org
>> >>
>> >
>> >
>> > _______________________________________________
>> > FreeSWITCH-users mailing list
>> > FreeSWITCH-users@lists.freeswitch.org
>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> > http://www.freeswitch.org
>> >
>> >
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users@lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users@lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>



--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm
MSN:anthony_minessale@hotmail.com
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org
googletalk:conf+888@conference.freeswitch.org
pstn:+19193869900

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

 
 
--
wbr,
Serge