On Thu, Dec 8, 2011 at 6:49 PM, Ryan V <ryan@kaevee.com> wrote:

On Fri, Dec 9, 2011 at 2:13 AM, Brian West <brian@freeswitch.org> wrote:

its freetdm/spanname/channelnumber/numbertodial

You can't do a on those as far as I knew.

I could see it trying to dial out on span 3 channel 1 even though I had "a" in

<action application="bridge" data="freetdm/3/a/$1"/>

Here is the excerpt from logs.

[DEBUG] switch_core_state_machine.c:362 (FreeTDM/3:1/9449905000) Running State Change CS_HANGUP

Thanks,

Hi Ryan,

Try disabling dial tone detection just to see if it works.

You can also record the dial tone using "ftdm trace" command and then use wavesurfer (or perhaps audacity) to see the pair of frequencies used for dial tone and try to match them in your tones.conf if they are not already.

Moises Silva
Software Engineer, Development Manager

msilva@sangoma.com

Sangoma Technologies

100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada

t. +1 800 388 2475 (N. America)

t. +1 905 474 1990 x128

f. +1 905 474 9223

VegaStream is now part of Sangoma!

Ask us about both Gateway Appliances and Internal Gateways