RE: re: AutoNAT - Local Networks not excluded

Are you registering your phones to the internal sip profile? Do you have anything like aggressive NAT detection enabled for that profile? For the extensions, are you rewriting the contact IP/port (is NDLB-connectile-dysfuncion or NDLB-tls-connectile-dysfunction specified for sip-force-contact)?

Do a ‘show registrations’ from the fs_cli as well as a ‘sofia status profile internal reg’ and post the results here (you may want to partially obscure any external IP addresses shown before posting) to give us more of an idea of what’s going on.

- Phil

_____________________________________________
From: Phil Quesinberry [mailto:philq@qsystemsengineering.com]
Sent: Tuesday, July 24, 2012 3:19 PM
To: 'freeswitch-users@lists.freeswitch.org'
Subject: re: AutoNAT - Local Networks not excluded

Set rtp-ip and sip-ip to your internal IP address. I believe that you should also be able to set it to: $${local_ip_v4} or $${bind_server_ip} as well.

- Phil

----------

VirteX g.d.monnezza at tiscali.it
Tue Jul 24 16:12:08 MSD 2012

Hi guys. I appreciate so much the Auto-NAT for uPnP capable firewalls. But

I'm experiencing an issue.

I have a FreeSwitch server behind a NAT, but I can't find a way to avoid

FreeSwitch using external IP (for SIP and RTP) for local networks (i.e.

192.168.0.0/16).

In my sip profiles for various interfaces I have NOT set the .

Anyway, the sofia status for all interfaces shows the EXT-RTP-IP and

EXT-SIP-IP set (with my public gateway IP). That's ok, even if I didn'

declard it with

My SIP phones register from a network different from the server one, but

still a local network. Then, SIP phones receive (from the server) the rtp

and sip signalling with its external IP. This prevent any communication.

How it is possible to tell FreeSwitch to NOT use ext IP for particular

networks?

Thanks to anyone who will point me in the right direction.

View this message in context: http://old.nabble.com/AutoNAT---Local-Networks-not-excluded-tp34201844p34201844.html

Sent from the Freeswitch-users mailing list archive at Nabble.com.

Phil Quesinberry

Q Systems Engineering, Inc.

Electronic Controls and Embedded Systems Development

(410) 969-8002

http://www.qsystemsengineering.com