Hi Karl,

Did you test the milliwatt tone using the FXS port? I asked because you said it's not sending the ringing signal. Do you mean the phones did not ring. The Digium cards require a separate power supply feed. Without it - it can't generate the 100V ringing voltage. This is very obvious but let's not discounting this possibility. :-)

/Nandy 


On Thu, Aug 15, 2013 at 11:21 AM, Karl Schmidt <karl@xtronics.com> wrote:
Looks like rxgain and txgain are not working - I was testing using the cool mW extension (thanks -
whoever put that in)  and could not change the level - did some digging and dahdi_diag shows that
the gains don't change.

; Aug 14 18:16:51 malaysia kernel: [350647.964612] dahdi: rxgain: ffffffffa02e7c70, txgain:
ffffffffa02e7c70, gainalloc: 0

; Aug 14 18:20:33 malaysia kernel: [350869.980742] dahdi: rxgain: ffffffffa02e7c70, txgain:
ffffffffa02e7c70, gainalloc: 0

Even tried changes over a reboot.


This card has absorbed a lot of time:
(Digium, Inc. Wildcard AEX410 4-port analog card (PCI-Express)) [OT]:(and now I find that it fails
to put out a real ring signal.  Apparently, whoever designed it did not know the difference between
RMS and peak voltage... fails to ring 3 out of 4 modems I tested. Gump, hiss,groan).

I can go in and modify the modem so it can detect the weak ring signal, but out of the box the audio
levels on the card are way off ( they were also off in Asterisk ) and if I want to have this working
well , I need to tweak those levels.


BTW - I can use the 1 dBm test tone stream to monitor the transmitted level - is there a way to
monitor a level coming back the other way?





--------------------------------------------------------------------------------
Karl Schmidt                                  EMail Karl@xtronics.com
Transtronics, Inc.                              WEB http://secure.transtronics.com
3209 West 9th Street                             Ph (785) 841-3089
Lawrence, KS 66049                              FAX (785) 841-0434

The lawyer was about two bubbles off plumb.
--------------------------------------------------------------------------------

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org