Thanks Steven.

 

I changed it to <param name="odbc-dsn" value="freeswitch-connector:root:system123#"/> and now it’s working fine.

 

Now I will work on call parking and picking. I will be using valet_park for that.

 

Thanks again

 

Nitin

 

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Steven Ayre
Sent: Thursday, November 29, 2012 1:26 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] mod_db help needed

 

Server seems back up today. It's been under a DDOS attack for a few days.

 

Your main problem is that your db.conf setup is wrong:

      <param name="freeswitch-connector" value="freeswitch:root:system123#"/>

Should be:

      <param name="odbc-dsn" value="freeswitch:root:system123#"/>

 

Pretty much every module uses the 'odbc-dsn' parameter name. Any unknown parameters are ignored. This is why you're seeing no error, FS is never even seeing the odbc-dsn param has been set. It'll be using the sqlite files by default.

 

Fix the file then 'reloadxml' and 'reload_db' to pick up the change without restarting FS.

 

If still failing after correcting that...

 

Have you also installed the MyODBC driver? If you're installing unixodbc from a package on your distro then it'll likely be there but in a separate package.

 

You can confirm that your ODBC DSN is working correctly by using the isql program at the CLI. If that connects then you know that your unixODBC settings are correct.

 

-Steve

 

On 29 November 2012 04:40, Nitin Tomer <ntomer@newgen.co.in> wrote:

Since site was down yesterday, I did some hit and trials myself, made the following changes in db.conf.xml –

 

<configuration name="db.conf" description="LIMIT DB Configuration">
  <settings>

      <param name="freeswitch-connector" value="freeswitch:root:system123#"/>
  </settings>
</configuration>

 

And added this entry in dialplan –

 

<action application="db" data="insert/testapp/newcall1/${res}" />

 

When I tried running it, I didn’t get any error. But neither any entries were made in the database.

 

Please tell me what I am doing wrong.

 

Regards

 

Nitin

 

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Nitin Tomer
Sent: Tuesday, November 27, 2012 3:52 PM
To: 'FreeSWITCH Users Help'


Subject: Re: [Freeswitch-users] mod_db help needed

 

Hi Yiftach,

 

Thanks for your reply. I have installed and configured ODBC on my server.

 

/etc/odbc.ini has following entries –

 

[freesiwtch-connector]

Description           = MySQL connection to 'freeswitch' database

Driver                = MySQL

Database              = freeswitch

Server                = localhost

UserName              = root

Password              = system123

Port                  = 3306

Socket                = /var/run/mysqld/mysqld.sock

 

After this I did ./configure and “make && make install”

 

Now what all changes I need to make in Freeswitch so that I can make ODBC work in it? Please help me out.

 

N.B. Today Freeswitch.org is down and therefore I am not able to look for any help there

 

Regards

 

Nitin

 

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Yiftach Golan
Sent: Friday, November 16, 2012 3:03 AM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] mod_db help needed

 

Hi Nitin,
Just install odbc on you system, I used this one (http://www.asteriskdocs.org/en/3rd_Edition/asterisk-book-html-chunk/installing_configuring_odbc.html) but you can use FreeSWITCH's explanations as well (http://wiki.freeswitch.org/wiki/Using_ODBC_in_the_core)
Once you are done the configure should already know that you have odbc support, just hit regular configure or as FreeSWITCH docs says :

Compile FreeSWITCH with ODBC support

UnixODBC support will be autodetected by ./configure, and if found, will be compiled into FreeSWITCH.

As for the keys it is pretty easy just go to (http://wiki.freeswitch.org/wiki/Mod_db) the query should be something like : 

<action application="set" data="var=${db(select/realm/key)}"/>

The documentation is actually pretty good so try to read it again it will make sense
Thanks,
Yiftach.

On Thu, Nov 15, 2012 at 4:51 AM, Nitin Tomer <ntomer@newgen.co.in> wrote:

I understand that I will have to make changes in db.conf.xml -

 

<configuration name="db.conf" description="LIMIT DB Configuration">

  <settings>

    <!--<param name="odbc-dsn" value="dsn:user:pass"/>-->

  </settings>

</configuration>

 

But the wiki also says this – “ODBC must be configured to use ODBC resources (configure with --enable-core-odbc-support).” What does this mean? I couldn’t find any more references to it.

 

Wiki says – “Realm and key are arbitrary strings. Consider realm as a container for keys.” Does this mean that I can use a realm for a particular type of data e.g. “callerdata”, use caller number as key and set the entered data against that key. But how would I be able to access this data from outside FreeSwitch?

 

Is the realm mapped to a table in the database or something similar?

 

Thanks in advance

 

Nitin

 

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Nitin Tomer
Sent: Thursday, November 15, 2012 3:30 PM
To: 'FreeSWITCH Users Help'
Subject: [Freeswitch-users] mod_db help needed

 

Hi,

 

I am trying to enter some data (entered by caller, received by Play and Get Digits). But I am not able to get much information about it from mod_db wiki. I want to enter data in an Oracle database. Please tell me what all I need to do, in order to do this.

 

Regards

 

Nitin

 

Disclaimer :- This e-mail and any attachment may contain confidential, proprietary or legally privileged information. If you are not the original intended recipient and have erroneously received this message, you are prohibited from using, copying, altering or disclosing the content of this message. Please delete it immediately and notify the sender. Newgen Software Technologies Ltd (NSTL) accepts no responsibilities for loss or damage arising from the use of the information transmitted by this email including damages from virus and further acknowledges that no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of NSTL.

 

 

Disclaimer :- This e-mail and any attachment may contain confidential, proprietary or legally privileged information. If you are not the original intended recipient and have erroneously received this message, you are prohibited from using, copying, altering or disclosing the content of this message. Please delete it immediately and notify the sender. Newgen Software Technologies Ltd (NSTL) accepts no responsibilities for loss or damage arising from the use of the information transmitted by this email including damages from virus and further acknowledges that no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of NSTL.

 


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

 

 

Disclaimer :- This e-mail and any attachment may contain confidential, proprietary or legally privileged information. If you are not the original intended recipient and have erroneously received this message, you are prohibited from using, copying, altering or disclosing the content of this message. Please delete it immediately and notify the sender. Newgen Software Technologies Ltd (NSTL) accepts no responsibilities for loss or damage arising from the use of the information transmitted by this email including damages from virus and further acknowledges that no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of NSTL.

 

 

Disclaimer :- This e-mail and any attachment may contain confidential, proprietary or legally privileged information. If you are not the original intended recipient and have erroneously received this message, you are prohibited from using, copying, altering or disclosing the content of this message. Please delete it immediately and notify the sender. Newgen Software Technologies Ltd (NSTL) accepts no responsibilities for loss or damage arising from the use of the information transmitted by this email including damages from virus and further acknowledges that no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of NSTL.

 


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

 


Disclaimer :- This e-mail and any attachment may contain confidential, proprietary or legally privileged information. If you are not the original intended recipient and have erroneously received this message, you are prohibited from using, copying, altering or disclosing the content of this message. Please delete it immediately and notify the sender. Newgen Software Technologies Ltd (NSTL) accepts no responsibilities for loss or damage arising from the use of the information transmitted by this email including damages from virus and further acknowledges that no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of NSTL.