Hi,
Getting a strange issue, all incoming calls work great, but outgoing calls are getting dropped.
Initially though that it was a NAT issue but verified the NAT and it is working properly. The proper external IP is being used and the gateway is registering with the service provider without issue.
Checked the call flow with sngrep and wireshark and found some strange issues.
- From my end, making the outbound call I see the call being connected and I receive a 200 OK that the call is connected and I have a connection. It will last about 1.5 minutes while at the same time I see 5-6 INVITE being sent from my Freeswitch to my service provider and then a BYE that it is hanging up.
- From my service provider, they see the call established and then: SIP/SDP 82 Request: INVITE sip: telephonnumber@IPxxxxxx:5060; transport=udp, in-dialog
The question is what is the “in-dialog” it seems to be causing the call to not be recognize that it is active and INVITE being generated and not being answered which causes the Bye Command to occur.
Not certain how to fix. Any suggestions would be appreciated.
