For internal calls between sipphones that work.

</condition>

</extension>

But for external calls doesn’t work.

So set actions are proceed, but not for external calls.

I try different and more variables.

Kind regards.

Erkan

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of David Ponzone
Sent: Monday, March 29, 2010 5:57 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Set the outgoing caller id

Erkan,

have you tried to set:

in the gateway params ?

Also, your provider is supposed to tell you which field they will trust as the CLID.

David Ponzone Direction Technique

email: david.ponzone@ipeva.fr

tel: 01 74 03 18 97

gsm: 06 66 98 76 34

Service Client IPeva

tel: 0811 46 26 26

www.ipeva.fr - www.ipeva-studio.com

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.

Le 29/03/2010 à 16:40, Erkan Ünlü a écrit :

The outgoing caller id don’t work.

I try many different fields/variables and also analyze your web link about the Channel Variables.

The outgoing id works for internal calls.

But for external calls don’t worked.

My provider support the outgoing caller id.

Here my example from Asterisk. That works.

exten => _00XX.,1,Set(CALLERID(num)=00492222222)

exten => _00XX.,n,Set(CALLERID(name)=00492222222)

….

The variables caller_id_name ande caller_id_number are read only.

Can we open it so I can write into the fields, because with effective_caller_id_name and number don’t work it.

Origination_caller…… are the same.

Hmmm… I don’t understand where is my failure.

Kind regards

Erkan

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins
Sent: Friday, March 26, 2010 5:37 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Set the outgoing caller id

Some providers have different ways of handling this. Using "effective_caller_id_number" and name are the usual ways of doing it. However some providers pick up the caller ID from a different field. Try experimenting with this:

http://wiki.freeswitch.org/wiki/Channel_Variables#sip_cid_type

Perhaps a bridge line like this would work:

<action application="bridge" data="{sip_cid_type=rpid}sofia/gateway/voicetrading.com/00000$1"/>

OR

<action application="bridge" data="{sip_cid_type=pid}sofia/gateway/voicetrading.com/00000$1"/>

Please try it and let us know what happens.
-MC

2010/3/25 Erkan Ünlü <erkan@speedingtrade.com>

Hi all,

I worked since 2 years with asterisk. But now I must use the Windows Platform.

So I found Freeswitch.

The first works with Freeswitch are very good, but I can’t set the outgoing caller id.

The outgoing caller id is shown at the phone on the end of the line.

I try some different variables but without result. My voip provider support to set the callerid, in asterisk it works.

….

</condition>

</extension>

….

Can anyone give me a idea for what can I do.

Kind regards

Erkan Unlu

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org