Hi, I am using Postgres in the core as well as for mod_db because the limit subsystem needs to be shared with other hosts

for mod_db

and with switch.conf

DB host has a latency of 27 ms from FreeSWITCH server. Channels keep on piling up until the max_session limit is reached and the switch does not accept any more channels. Seems like the channel info is not being released from the database. Even now I have stopped sending any calls, the switch still shows 7000+ channels connected. Offcourse that’s the database only. But why this is happening?

freeswitch@internal> show calls count

7260 total.

freeswitch@internal> status

UP 0 years, 0 days, 0 hours, 24 minutes, 54 seconds, 940 milliseconds, 636 microseconds

FreeSWITCH (Version 1.4.6 git 9479729 2014-06-03 19:35:16Z 64bit) is ready

12884 session(s) since startup

0 session(s) - peak 10000, last 5min 0

0 session(s) per Sec out of max 500, peak 89, last 5min 0

10000 session(s) max

min idle cpu 0.00/99.83

Current Stack Size/Max 240K/8192K

show channels shows

0d01315c-ed00-11e3-a7c7-dfbcc3672627,inbound,2014-06-05 18:23:42,1402007022,sofia/Profile_250.218/vGriffins@88.208.219.118:5050,CS_EXECUTE,vGriffins,123456789,88.208.219.118,4414732506,,,RINGING,,,,,vBilling,,,,,,,,,,,,,,,,,,,,,

But when I try to kill that uuid,

freeswitch@internal> uuid_kill 0d01315c-ed00-11e3-a7c7-dfbcc3672627

-ERR No such channel!

I am not sure what’s going on except something is not allowing for the channels to be cleared from the database. I also have tried rtp-timer-name =soft and session-timeout=10 with enable-timer=true, but that does not helps. What should I look for now?

Thanks.

Sent with Unibox