; !! THIS IS A SAMPLE CONFIGURATION ONLY !!

; refer to http://wiki.freeswitch.org/wiki/FreeTDM for further documentation

[general]
; whether to launch a thread for CPU usage monitoring
cpu_monitor => no

; How often (in milliseconds) monitor CPU usage 
cpu_monitoring_interval => 1000

; At what CPU percentage raise a CPU alarm
cpu_set_alarm_threshold => 80

; At what CPU percentage stop the CPU alarm
cpu_clear_alarm_threshold => 70

; Which action to take when the CPU alarm is raised
; it can be warn and/or reject calls
; cpu_alarm_action => warn,reject
cpu_alarm_action => warn

; Where to dump DTMF debug files (see per span debugdtmf=yes option)
debugdtmf_directory=/full/path/to/dtmf/directory

; spans are defined with [span <span type> <span name>]
; the span type can either be zt, wanpipe or pika
; the span name can be any unique string
;[span wanpipe myWanpipe]

; valid trunk types are: FXO, FXS, EM, E1, T1, J1, BRI, BRI_PTMP
;trunk_type => FXS

; add FXS channels from 3 to 4 at wanpipe span 1 to this freetdm span
;fxs-channel => 1:3-4

; IO stats. Defaults to yes, you can print the stats with ftdm iostats print <span> <chan>
; This feature depends on the span IO type, currently only Wanpipe spans support it
; This may cause a warning to be printed once in a while if audio is not provided fast enough
; and causes the driver to transmit an idle frame (when there is no data provided by the application)
iostats => yes

;[span wanpipe myWanpipe2]
;trunk_type => FXO
; This number will be used as DNIS for FXO devices
;fxo-channel => 1:1-2

;[span zt myZaptelSpan]
;number => 9999
;fxs-channel => 1

;[span zt mySecondZaptelSpan]
; This number will be used as DNIS for FXO devices
;number => 2
;fxo-channel => 3

; MFC-R2 typical span configuration

; MFC-R2 with wanpipe (Sangoma)
;[span wanpipe myWanpipeSpan]
;trunk_type => E1
;cas-channel => 1-15:1101
;cas-channel => 17-31:1101

; MFC-R2 with Zaptel/DAHDI
;[span zt myWanpipeSpan]
;trunk_type => E1
;cas-channel => 1-15:1101
;cas-channel => 17-31:1101

; generic channel parameters
; this parameters are accepted by any type of span/channel
; remember that for generic channel parameters only channels
; below the parameter within the span will be affected

; Channel audio gain
; rxgain => 0.0
; txgain => 0.0

; Whether to perform media dumps for DTMF debugging
; debugdtmf => yes
;ISDN PRI with DAHDI                                                                                                           
[span zt FreeTDM1]
name => FreeTDM1
number => 1
trunk_type => E1
b-channel=1-15
d-channel=16
B-channel=17-31

[span zt FreeTDM2]
name => FreeTDM2
number => 2 
trunk_type => E1
b-channel=32-46
d-channel=47
B-channel=48-62

[span zt FreeTDM3]
name => FreeTDM3
number => 3 
trunk_type => E1
b-channel=63-77
d-channel=78
B-channel=79-93

[span zt FreeTDM4]
name => FreeTDM4
number =>4 
trunk_type => E1
b-channel=94-108
d-channel=109
B-channel=110-124

[span zt FreeTDM5]
name => FreeTDM5
number =>5 
trunk_type => E1
b-channel=125-139
d-channeL=140
B-channel=141-155

[span zt FreeTDM6]
name => FreeTDM6
number =>6
trunk_type => E1
b-channel=156-170
d-channeL=171
B-channel=172-186

[span zt FreeTDM7]
name => FreeTDM7
number =>7
trunk_type => E1
b-channel=187-201
d-channeL=202
B-channel=203-217

[span zt FreeTDM8]
name => FreeTDM8
number =>8
trunk_type => E1
b-channel=218-232
d-channeL=233
B-channel=234-248