Yes, the
internal profile exists.
Name Type Data State
=================================================================================================
internal profile
sip:mod_sofia@192.168.10.25:5060 RUNNING (0)
internal-ipv6 profile
sip:mod_sofia@[::1]:5060 RUNNING (0)
external profile
sip:mod_sofia@192.168.10.25:5080 RUNNING (0)
example.com gateway sip:joeuser@example.com
NOREG
192.168.10.25
alias internal ALIASED
=================================================================================================
3 profiles 1 alias
From:
freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org]
On Behalf Of Michael Collins
Sent: Tuesday, December 22, 2009 11:15 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Freeswitch not seeing Register requests
On Tue, Dec 22, 2009 at 10:50 AM, Larry Marshall <lcm@marshap.com> wrote:
I
have set up a second FreeSWITCH box on the same LAN. I have v16018 installed on
it and have changed nothing.
I
configured a Polycom phone to register one of its four lines to this second
box, but it does not register. When looking at the console, there is no
activity. However, there is SIP activity on the box which I have captured via
ngrep. It looks like the phone is sending out REGISTER requests but there is no
response. The request on the pastebin repeats forever, with only the timestamp
varying.
On the new box do "sofia status" - does the
internal profile exist?
Is the problem that there are two FreeSWITCHes? Any suggestions on how I can make it work?
On the original and the new box in vars.xml "external_sip_ip=stun:stun.freeswitch.org"
On the original box in vars.xml "external_sip_port=5090" but in the new it is 5080.
Do I need to hardcode the external_sip_ip addresses in both boxes?
http://pastebin.freeswitch.org/11600
Thanks Lars