I also just realised it is producing the message for both, I just wasn’t seeing it on the working version of SLA because it was running outside of my scrolling range as soon as I picked up the call with TPORT_LOG=9 set

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale
Sent: October-17-12 12:56 PM
To: FreeSWITCH Users Help
Subject: Suspicious URL:Re: [Freeswitch-users] Suspicious URL:RE: Suspicious URL:Re: SLA/BLF causing 482 loop detected errors on powerpc build

Maybe its not the same? Look at the sip messages and the configs again?

On Wed, Oct 17, 2012 at 9:30 AM, KEN KELLY-TURNER <KEN.KELLY-TURNER@adtran.com> wrote:

Why would I only be getting that warning on my PPC freeswitch with the same phones and configurations?

Thanks,

Ken

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale
Sent: October-16-12 11:49 AM
To: FreeSWITCH Users Help
Subject: Suspicious URL:Re: [Freeswitch-users] SLA/BLF causing 482 loop detected errors on powerpc build

That is what it does when a line is supposed to be SLA and it does not contain the appearance-index in the call-info header.

On Tue, Oct 16, 2012 at 10:20 AM, KEN KELLY-TURNER <KEN.KELLY-TURNER@adtran.com> wrote:

Hi Anthony,

I upgraded to the git head, the problem persisted. I’m updating my phones to 4.0.3 now but I just noticed an additional warning that is produced on my ppc build when I attempt to make a call to my SLA line:

[WARNING] sofia.c:8906 Auto-Fixing Broken SLA [sip:10.10.11.1;appearance-index=1]

Any thoughts?

And I am a co-op student for adtran, I’m just trying to determine functionality of freeswitch in a linux-powerpc environment.

Thanks,

Ken

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale
Sent: October-16-12 9:34 AM
To: FreeSWITCH Users Help
Subject: Suspicious URL:Re: [Freeswitch-users] SLA/BLF causing 482 loop detected errors on powerpc build

When you are working on debugging stuff its best to use GIT HEAD and not frozen releases.

Did you enable the logging on your phone to see what it may have to say? 4.0.x is still a buggy firmware on polycom so you might want to try the last 3.5 or 4.0.3, it may be a simple as a race condition based on the performance of the 2 boxes. We made some changes to accommodate such a situation in GIT HEAD last week.

BTW,

Couldn't help notice your domain name. Are you doing something on behalf of Adtran or you just happen to have an email addr there?

On Mon, Oct 15, 2012 at 2:41 PM, KEN KELLY-TURNER <KEN.KELLY-TURNER@adtran.com> wrote:

Hi all,

I’ve cross compiled freeswitch 1.2.3 for ppc and I’m trying to get SLA and BLF working on my polycom phones. I tested both features on a Ubuntu build of freeswitch 1.2.3 and they work perfectly. If I use the same configuration and phones on my powerpc version I get the following error:

send 1243 bytes to udp/[10.10.8.81]:5060 at 00:28:17.493372:

------------------------------------------------------------------------

NOTIFY sip:1003@10.10.8.81 SIP/2.0

Via: SIP/2.0/UDP 10.10.11.1;rport;branch=z9hG4bKX2crS8D8HQtaB

Max-Forwards: 70

From: <sip:1002@10.10.11.1>;tag=0KH1Bj6SVsLd

To: "free3" <sip:1003@10.10.11.1>;tag=739B1DFC-3CEB89D3

Call-ID: 4a84c5e6-67b90e1d-2a96ef64@10.10.8.81

CSeq: 4052937957 NOTIFY

Contact: <sip:1002@10.10.11.1:5060;transport=udp>

User-Agent: FreeSWITCH-mod_sofia/1.2.3

Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE

Supported: timer, precondition, path, replaces

Event: presence

Allow-Events: talk, hold, conference, presence, dialog, line-seize, call-info, sla, include-session-description, presence.winfo, message-summary, refer

Subscription-State: active;expires=3572

Content-Type: application/xpidf+xml

Content-Length: 430

<?xml version="1.0"?>

<!DOCTYPE presence PUBLIC "-//IETF//DTD RFCxxxx XPIDF 1.0//EN" "xpidf.dtd">

<note>Registered(UDP)</note>

</status>

</address>

</atom>

</presence>

------------------------------------------------------------------------

recv 395 bytes from udp/[10.10.8.81]:5060 at 00:28:17.513912:

------------------------------------------------------------------------

SIP/2.0 482 Loop Detected

Via: SIP/2.0/UDP 10.10.11.1;rport;branch=z9hG4bKX2crS8D8HQtaB

From: <sip:1002@10.10.11.1>;tag=0KH1Bj6SVsLd

To: "free3" <sip:1003@10.10.11.1>;tag=739B1DFC-3CEB89D3

CSeq: 2147483647 NOTIFY

Call-ID: 4a84c5e6-67b90e1d-2a96ef64@10.10.8.81

Event: presence

User-Agent: PolycomSoundPointIP-SPIP_550-UA/4.0.2.11307_0004f2149566

Accept-Language: en

Content-Length: 0

------------------------------------------------------------------------

Anybody else encounter this or have any suggestions on how to resolve?

Thanks,

Ken

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm
MSN:anthony_minessale@hotmail.com
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org
googletalk:conf+888@conference.freeswitch.org
pstn:+19193869900