Hi,

Just updating on this, if I use the enterprise originate delimiter I can pickup the call, however it only calls the first user in the huntgroup, which I believe is by design.

So therefore I still cannot get pickup to work when using with dial-string in directory, has anyone got this working before?

Thanks

Jon

From: hunterj91@hotmail.com
To: freeswitch-users@lists.freeswitch.org
Subject: dial-string pickup possible after group call?
Date: Wed, 27 Apr 2016 17:43:26 +0000

Hi Guys,

Just wondering if its possible to use the user dial-string command to do call pickup after a call has been sent to a hunt group using the bridge and group_call function?

So basically a call to group 5000, sends calls to  extension 1000 and 2000 which are in the group.

This all works fine but I want to be able to pickup the call by dialling *8 then either 1000 or 2000.

I can do this if I am not using the group_call function, and its just a normal inbound call to the extension I want to pickup, so just wondered if its possible to do a pickup of one of the extensions in the group?

To start the group_call Im using in my dialplan;

Dialing 5000 results in;


<action application="bridge" data="${group_call(huntgroup1@test.com+A}"/>


Which then rings both extension 1000 and 2000 which have the dial-string defined;


<param name="dial-string" value="sofia/internal/${dialed_user}@test.com,pickup/${dialed_user}@test.com"/>


If I add pickup after group_call, this allows be to pickup extension 5000, but I need to be able to create the pickup channel using the dial-string, am I doing this wrong or does anyone have an idea how to achieve this?


And just to be clear pickup works fine for normal inbound calls, its just when implementing group_call.

Many thanks


Jon