Thanks for the
explanation, Brian; it was lost on me before.
It was a DLink
DIR-625 which had UPnP enabled. I turned it off.
It looks like
the error message only appears on the console when started without the nc
option; and it does not appear in log/freeswitch.log in any case.
2009-06-09 16:24:32.271913 [INFO] switch_event.c:564 Activate
Eventing Engine.
2009-06-09 16:24:32.274131 [DEBUG] switch_event.c:552 Create
event dispatch thread 0
2009-06-09 16:24:32.663627 [INFO] switch_nat.c:159 Scanning for
NAT
2009-06-09 16:24:32.664053 [DEBUG] switch_nat.c:127 Checking for
PMP 1/5
2009-06-09 16:24:32.913583 [DEBUG] switch_nat.c:127 Checking for
PMP 2/5
2009-06-09 16:24:32.914581 [DEBUG] switch_nat.c:127 Checking for
PMP 3/5
2009-06-09 16:24:33.415479 [DEBUG] switch_nat.c:127 Checking for
PMP 4/5
2009-06-09 16:24:34.415249 [DEBUG] switch_nat.c:127 Checking for
PMP 5/5
2009-06-09 16:24:36.413782 [DEBUG] switch_nat.c:164 Checking for
UPnP
2009-06-09 16:24:38.906588 [ERR] switch_nat.c:96 uPNP Device
(url: http://192.168.10.253:4444/wipconn) returned an invalid external address
of 0.0.0.0. Disabling uPNP
2009-06-09 16:24:38.906633 [INFO] switch_nat.c:174 No PMP or
UPnP NAT detected!
2009-06-09 16:24:38.908650 [INFO] switch_core_sqldb.c:507
Opening DB
2009-06-09 16:24:38.950200 [NOTICE] switch_scheduler.c:166
Starting task thread
Thanks, Lars
From:
freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian
West
Sent: Tuesday, June 09, 2009 2:33 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Can't hear outbound calls
You have to start freeswitch without -nc to see it. Only
happens during start up.
/b
On Jun 9, 2009, at 4:26 PM, Lars Zeb wrote:
Rupa,
Thanks for the
detailed response. After upgrading from 13639 to 13732, I see no log errors. I
am accessing Freeswitch vi fs_cli, but I did look in log/freeswitch.log.
Certainly I see nothing that looks like your ERR below.
I too have a
dlink router. I will look at its configuration and see if upnp is enabled.
Lars