On Thu, Feb 11, 2010 at 4:18 PM, Nikolay Kondratyev <kond@nstel.ru> wrote:

Tihomir,

Thanks for help.

I enabled fast start on IPO and I can hear voice now. But the ringback tone and voice appears to be wheezy, but I will investigate that tomorrow.


set framing time for your codec to 30ms in IPO, also play with  PI in alerting... set it to 2.

 

Thanks again.

Nikolay.

 

 

 

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Tihomir Culjaga
Sent: Thursday, February 11, 2010 2:34 PM


To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] h323 - sip call is not working

 

Nikolay, you are sending slow start with tunneling=true ?!?!



It is not gong to work :)

Please can you set fast start instead?


Your call failed because there was no mediaControll channel negotiated at all... actually the call had to be aborted because wrong signaling .. but anyhow.

Please on your IPO use FastStart with h245Tunneling=true... also, same settings on FS side as well (exclude h245 in setup as well).




Frame 13 (277 bytes on wire, 277 bytes captured)
Ethernet II, Src: AlliedTe_22:9b:4a (00:00:cd:22:9b:4a), Dst: Vmware_67:33:a7 (00:0c:29:67:33:a7)
Internet Protocol, Src: 172.23.14.2 (172.23.14.2), Dst: 172.23.22.49 (172.23.22.49)
Transmission Control Protocol, Src Port: oirtgsvc (4141), Dst Port: h323hostcall (1720), Seq: 1, Ack: 1, Len: 223
TPKT, Version: 3, Length: 223
Q.931
    Protocol discriminator: Q.931
    Call reference value length: 2
    Call reference flag: Message sent from originating side
    Call reference value: 0012
    Message type: SETUP (0x05)
    Bearer capability
    Display  'Gornak Alexandr>2853'
    Calling party number: '5840'
    Called party number: '2853'
    User-user
H.225.0 CS
    H323-UserInformation
        h323-uu-pdu
            h323-message-body: setup (0)
                setup
            h4501SupplementaryService: 1 item
            1... .... h245Tunneling: True






On Thu, Feb 11, 2010 at 9:18 AM, Nikolay Kondratyev <kond@nstel.ru> wrote:

> But I do recommenf to use SIP, since it's much better supported by FS.
>
> /Peter

But SIP is poorly supported by IPO.
Thanks and regards,

Nikolay.


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org

 


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org