Hi

Can u help me a bit here. I have a scenario like

GW_priority_1_30_ports
GW_priority_2_60_ports


So if first gatway is down or fails with giving cause code (480 or 503 ) OR its 30 channels are occupied then next carrier should be selected. And so on.

I can see failover config in dial plan http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_bridge#Implementing_Failover . But blending it with limit and doing failover on Gateway down and on the basis of some cause code is confusing.

Your help and hints are appreciated.

--waisee