Hi Guys,

I’ve been experimenting with originate_timeout and progress_timeout as follows…

However, shouldn’t the timeout trigger a 408 Request Timeout instead of 480 Temporary Failure if no Provisional response received?

Just curious, it seems to make sense to me.. but maybe SIP gods see differently.

I have also tried using ${originate_disposition} after both bridge attempts to fetch the timeout disposition

but instead this is set to NO_ANSWER (which would be correct for first attempt)

As I understand it originate_disposition is reset for each bridge completed either successfully or unsuccessfully.

Shouldn’t the second attempt with no 100 Trying ever received trigger a NO_USER_REPONSE on timeout?

According to RFC 4497 that would map to 408 Request Timeout

For this test

(please note progress_timeout set to low “2” value to test timeout)

Node 10.200.1.11 is setup in such a way it responds with 100 Trying but never reaches 180 or 183 before 2 sec timer expires (as desired for this test)

Node 10.200.1.12 (is disconnected and never even sends a provisional response, as desired)

I have tried…

<?xml version="1.0" encoding="UTF-8" standalone="no"?>

<document type="freeswitch/xml">

  <section name="dialplan" description="FSXML FastCgi Provided Dialplan">

    <context name="public">

      <extension name="FSXML.FCGI Generated Route">

        <condition>

          <action application="set" data="continue_on_fail=true"/>

          <action application="set" data="hangup_after_bridge=true"/>

          <action application="set" data="call_timeout=120"/>

          <action application="set" data="progress_timeout=2"/>

          <action application="bridge" data="sofia/inside/+17001231234@10.200.1.11:5060"/>

          <action application="bridge" data="sofia/inside/+17001231234@10.200.1.12:5060"/>

        </condition>

      </extension>

     </context>

  </section>

</document>

As well as …

<?xml version="1.0" encoding="UTF-8" standalone="no"?>

<document type="freeswitch/xml">

  <section name="dialplan" description="FSXML FastCgi Provided Dialplan">

    <context name="public">

      <extension name="FSXML.FCGI Generated Route">

        <condition>

          <action application="set" data="continue_on_fail=true"/>

          <action application="set" data="hangup_after_bridge=true"/>

          <action application="bridge" data="{originate_timeout=120,progress_timeout=2}sofia/inside/+17001231234@10.200.1.11:5060"/>

          <action application="bridge" data="{originate_timeout=120,progress_timeout=2}sofia/inside/+17001231234@10.200.1.12:5060"/>

        </condition>

      </extension>

     </context>

  </section>

</document>

Any thoughts, am I completely nuts and missing something in the spec?

Regards,

-Adam