Sounds like you need to enable INFO dtmf or set it for liberal dtmf
On 7/9/13 6:01 PM, "Henry Huang" <red.rain.seven@gmail.com> wrote:
Anthony,
May I ask what version of FreeSWITCH is running on webrtc.freeswitch.org <http://webrtc.freeswitch.org> ? I am getting different result when pressing dtmf from webrtc client over my FreeSWITCH (Version 1.5.3b git e0210d7 2013-07-03 20:01:03Z) with default sip_profile configuration.
2013-07-09 22:58:57.724523 [WARNING] sofia.c:7598 IGNORE INFO DTMF(1) (This channel was not configured to use INFO DTMF!)
Thanks,
Henry
On Wed, Jul 3, 2013 at 9:48 PM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
The liberal dtmf option will allow all types of dtmf.
On Jul 3, 2013 10:03 PM, "Henry Huang" <red.rain.seven@gmail.com> wrote:
I don't know what it is, but I am getting caught in more issues. I really want to say thank you and it seems like issue on my end since your demo site is working fine.
I don't think the vanilla config is using dtmf-type "info" by default. I noticed that because my dtmf info start to break. I have from the beginning used dtmf-type info in my internal sip profile and it has been working since April when I dial into 5000 IVR with JsSIP. But since I upgraded to the latest Git last week, I am getting log message saying my channel doesn't support dtmf info, therefore I can't try anything after dialing into the 5000 IVR.
I am on the verge to reinstall everything and start over. But before I do that, is there anything I am not doing correctly here? Is it Ubuntu? and why would the dtmf info stops working?
Thanks,
Henry
On Wed, Jul 3, 2013 at 7:04 PM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
Its the defaults from the vanilla config with the webrtc opened up.
On Wed, Jul 3, 2013 at 6:09 PM, Henry Huang <red.rain.seven@gmail.com> wrote:
Thanks, the demo site does work. Is it possible that you can share the sip_profile configuration for the demo site here?
On Wed, Jul 3, 2013 at 2:15 PM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
you should use ext up in 9xxx for chrome too, those lower ext spaces are reserved for other stuff.
On Wed, Jul 3, 2013 at 3:45 PM, Henry Huang <red.rain.seven@gmail.com> wrote:
Anthony,
Thanks, I am able to register a regular SIP to extension 9001 on webrtc.freeswitch.org <http://webrtc.freeswitch.org> and I have a user: 4000 on Chrome. When I dial from 9001 to 4000, I get a voice prompt asking for "please enter your ID followed by #" and I don't know how to get pass that.
Thanks,
Henry
On Wed, Jul 3, 2013 at 10:02 AM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
You can register normal sip clients to that demo too, it has blind reg enabled.
Just pick some unique ext numbers up in the 9xxx range
On Wed, Jul 3, 2013 at 11:45 AM, Henry Huang <red.rain.seven@gmail.com> wrote:
Michael,
I understand that webrtc.freeswitch.org <http://webrtc.freeswitch.org> works and so is my test server. The one thing I can't verify from webrtc.freeswitch.org <http://webrtc.freeswitch.org> is calling from regular SIP client back to webrtc client, and this happened to be the only thing I am having issue with. Everything you see and do on webrtc.freeswitch.org <http://webrtc.freeswitch.org> works fine on my test environment.
So again, is there anyone who can call from pstn/sip to webrtc without problems?
Henry
On Wed, Jul 3, 2013 at 12:58 AM, Michael Jerris <mike@jerris.com> wrote:
yes. you can see it working on the demo at http://webrtc.freeswitch.org.
On Jul 3, 2013, at 12:53 AM, Henry Huang <red.rain.seven@gmail.com> wrote:
Anyone getting audio working bridging call to webrtc client without bypassing media?
On Jul 2, 2013 6:45 PM, "João Mesquita" <jmesquita@freeswitch.org> wrote:
I think you might need to re bootstrap maybe?
On Jul 2, 2013 8:54 PM, "Henry Huang" <red.rain.seven@gmail.com> wrote:
I did, and just in case I ran it again.
./configure
make
make install
restart freeswitch
This is what I am still seeing.
2013-07-02 16:40:51.135302 [ALERT] switch_core_media.c:1310 Dispatched RTCP event
2013-07-02 16:40:51.175310 [ALERT] switch_rtp.c:3883 Drop audio packet 70 bytes (dtls not ready!) b=4294967168
2013-07-02 16:40:52.255306 [ALERT] switch_rtp.c:1510 Setting RTCP src-1 to 10.128.7.103
2013-07-02 16:40:52.255306 [ALERT] switch_rtp.c:1515 Setting RTCP src-1 LENGTH to 12 (1280, 10.128.7.103)
2013-07-02 16:40:52.255306 [ALERT] switch_rtp.c:1516 Setting msw = -1267375797, lsw = -601115572
2013-07-02 16:40:52.255306 [ALERT] switch_rtp.c:1517 now = 0, now lo = 0, now hi = 0
Henry
On Tue, Jul 2, 2013 at 3:13 PM, Ken Rice <krice@freeswitch.org> wrote:
Did you reconfigure?
On 7/2/13 4:29 PM, "Henry Huang" <red.rain.seven@gmail.com <http://red.rain.seven@gmail.com/> > wrote:
Ok, I have upgraded openssl to 1.0.1e, recompiled FreeSWITCH, but I am still getting the "dtls not ready!" alerts and no audio
2013-07-02 14:26:47.695312 [ALERT] switch_rtp.c:4408 sofia/internal/1004@10.128.7.103 <http://sofia/internal/1004@10.128.7.103> Hot Hit 2
2013-07-02 14:26:47.695312 [ALERT] switch_rtp.c:4425 sofia/internal/1004@10.128.7.103 <http://sofia/internal/1004@10.128.7.103> timer while HOT
2013-07-02 14:26:47.715313 [ALERT] switch_rtp.c:5443 Skip sending audio packet 172 bytes (dtls not ready!)
Here is my openssl version:
root@fusionpbx:/usr/src# openssl version
OpenSSL 1.0.1e 11 Feb 2013
On Tue, Jul 2, 2013 at 9:35 AM, Michael Collins <msc@freeswitch.org <http://msc@freeswitch.org/> > wrote:
You'll need to make sure you have OpenSSL 1.0.1e which was released in Feb of this year. I suspect the version in Ubuntu might not be older.
-MC
On Tue, Jul 2, 2013 at 9:02 AM, Henry Huang <red.rain.seven@gmail.com <http://red.rain.seven@gmail.com/> > wrote:
Michael,
I am just using whatever comes with Ubuntu 12.04 64bit.
Package: openssl
Version: 1.0.1-4ubuntu5.8
Depends: libc6 (>= 2.15), libssl1.0.0 (>= 1.0.1)
Thanks,
Henry
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org <http://consulting@freeswitch.org/>
http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com <http://www.cudatel.com/>
Official FreeSWITCH Sites
http://www.freeswitch.org <http://www.freeswitch.org/>
http://wiki.freeswitch.org <http://wiki.freeswitch.org/>
http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org <http://FreeSWITCH-users@lists.freeswitch.org/>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org <http://www.freeswitch.org/>
--
Ken
http://www.FreeSWITCH.org
http://www.ClueCon.com
http://www.OSTAG.org
irc.freenode.net #freeswitch