Hi Brian,

Thanks for your feedback.

I’ve attempted to create a decent bug:

http://jira.freeswitch.org/browse/OPENZAP-120

Cheers,
-Slim
--
Jeroen C. "Slim" van Gelderen

---

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West
Sent: Wednesday, December 01, 2010 17:23
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] "No Digits to send" on purpose?

This is NOT specifically a FreeSWITCH issue its mod_freetdm that has the parsing setup to require digits... small bug on jira would get this resolved.  http://jira.freeswitch.org

/b

On Dec 1, 2010, at 4:12 PM, Jeroen C. van Gelderen wrote:

The problem is that Freeswitch in its current incarnation insists that I send at least one DTMF digit out on the FXO port. I work around this issue by sending a ‘w’ “digit” as follows:

<action application="bridge" data="freetdm/span_fxo_csd/1/w"/>

This does not actually cause any DTMF tones to be sent out on the FXO port (so my dialtone is not disturbed) but it does cause a 5-second wait before the dialtone is heard on the FXS port.

What I really need is this:

<action application="bridge" data="freetdm/span_fxo_csd/1/"/>

Using this however results in the "No Digits to send" error.