When I need to do something like this, what I do is set sipp2 to have 2 scripts both using the same IP and port.

One sends the register and deals with authentication \ OK.
The other is then run after this to wait and receive the incoming call.

So you would run them like

sipp2_register                   - Performs registration and ends
sipp2_receiveCall              - Waits for incoming call, while listening on same IP \ Port as sipp2_register
sipp1_makeCall                - Makes outgoing call

A sample register scenario is

<scenario name="Register">
<send start_rtd="1" retrans="500">
    <![CDATA[

      REGISTER sip:[remote_ip]:[remote_port] SIP/2.0
      Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]1;rport
      Max-Forwards: 70
      To: TestUser1 <sip:user@[remote_ip]:[remote_port]>
      From: TestUser1 <sip:user@[remote_ip]:[remote_port]>;tag=[pid][call_number]
      Call-ID: [call_id]
      CSeq: 1 REGISTER
      Contact: <sip:user@[local_ip]:[local_port]>
      Expires: 240
      User-Agent: SIPp
      Content-Length: 0

    ]]>
</send>

<recv response="401" rtd="1" auth="true">
</recv>

<send start_rtd="2" retrans="500">
    <![CDATA[

      REGISTER sip:[remote_ip]:[remote_port] SIP/2.0
      Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]2;rport
      Max-Forwards: 70
      To: TestUser1 <sip:user@[remote_ip]:[remote_port]>
      From: TestUser1 <sip:user@[remote_ip]:[remote_port]>;tag=[pid][call_number]
      Call-ID: [call_id]
      CSeq: 2 REGISTER
      Contact: <sip:user@[local_ip]:[local_port]>
      Expires: 240
      User-Agent: SIPp
      [authentication username=user password=pass]
      Content-Length: 0

    ]]>
</send>

<recv response="200" rtd="2">
</recv>

<ResponseTimeRepartition value="10, 20, 30, 40, 50, 100, 250, 500"/>

</scenario>

2009/3/26 Jonas Gauffin <jonas.gauffin@gmail.com>

Hello

I want to achive this: Sipp1 -> FS -> Sipp2

Sipp1 emulates a inbound calls (easy to achive)
Sipp2 should emulate a registered user (i.e. register with FS and then just wait for calls and hangup when sipp1 hangsup)

How do I configure sipp as "Sipp2"?

Thanks,
Jonas

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org