I tested it and I definitely had that ip on the box and port was not taken.

it seems that the code just falls back to use sip-ip instead of taking an ip from the ws settings.

On Thu, Jul 17, 2014 at 10:24 PM, Michael Jerris <mike@jerris.com> wrote:

If putting an ip before the : doesn't work, its due to that IP not being on the box to bind to, or that port not being available to bind on that port.

On Jul 17, 2014, at 1:31 AM, Yosi Taguri <yosi@taguri.com> wrote:

we have machines with two network cards, one is private and one is public.

It seems that FS doesn't allow to specify the ip for ws-binding and wss-binding.

<param name="wss-binding" value=":7443"/>

trying to put an ip before the colon ends up with a profile not being loaded. 

from looking at the source code it seems that the code looks for sip-ip setting which in our case is set to the internal ip.

Am I missing something?

--

Yosi Taguri | Founder & CTO | Yalo | http://yaloapp.com | Mobile: +972-54-4816020 | Google Voice US Mobile: +1 (415) 935-1126 | Email: yosi@taguri.com