Hi Anthony,

Thank you very much for your response.

Sorry, I meant that we are using the _latest_ git HEAD at time of writing.

I have now tried passthru_ptime_mismatch=true, and it fixed the recording of some of the cases of asynchronous ptime, but also broke other previously "working" cases.


Kind regards,


Colin



On 8 June 2012 21:03, Anthony Minessale <anthony.minessale@gmail.com> wrote:
have you tried updating lately?
also try global_setvar passthru_ptime_mismatch=true


On Fri, Jun 8, 2012 at 3:29 AM, <colins@succinct.co.za> wrote:
> Hi,
>
> Please, I was wondering if there is anything obvious that we are missing
> when trying to record a G729 call with asynchronous pimes (in: 20ms, out:
> 60ms).
>
> The problem case call flow is:  inbound leg (ptime 20 ms), start recording,
> playback a short message, bridge to outbound (destination can only handle a
> ptime of 60 ms).   We are using mod_com_g729's codec.   The audio while on
> the call in normally fine (rarely there is one way speech depending on
> inbound/outbound provider), but the recording has a garbled outbound
> (Callee) leg (inbound/Caller voice is fine.).
>
> We have tried all the combinations of  G729@20i, G729@60i,
> rtp-autofix-timing, and default-ptimes to no avail.
>
> We are using git HEAD.
>
> I do see this on fs_cli:
>
> 2012-06-07 16:56:45.543269 [INFO] mod_com_g729.c:78 ENCODER DESTROYX -
> 0xa8894898 (nil)
> 2012-06-07 16:56:45.543269 [INFO] mod_com_g729.c:79 DECODER DESTROYX -
> 0xa8894898 (nil)
> 2012-06-07 16:56:45.583270 [WARNING] mod_sofia.c:1158 Asynchronous PTIME not
> supported, changing our end from 20 to 60
> 2012-06-07 16:56:45.583270 [DEBUG] sofia_glue.c:2931 Changing Codec from
> G729@20ms@8000hz to G729@60ms@8000hz
> 2012-06-07 16:56:45.623271 [INFO] mod_com_g729.c:78 ENCODER DESTROYX -
> 0xa86fe340 0xa86f1e78
>
> Should this be working, are we missing something obvious?
>
>
> Thank you,
>
>
> Kind regards,
>
>
> Colin