The ztcfg seems okay since it set the signaling to kewlstart. What part is not working? Be sure to pastebin your openzap.conf and openzap.conf.xml files as well as a full debug of what happens when loading mod_openzap.
-MC

On Wed, Oct 7, 2009 at 3:40 AM, Woody Dickson <woodydickson@gmail.com> wrote:
Hi,

I am trying to setup a Digium TDM400P following the instruction on the wiki. 
It is a 1 fxo and 1 fxs card, so I tried
loadzone=in
defaultzone=in
fxsks=2
fxoks=1

and

loadzone=in
defaultzone=in
fxsks=1
fxoks=2

None works.  Does anyone know how it should be configured?

Here is what I get by following the wiki.

[root@localhost zaptel]# ztcfg -vv

Zaptel Version: SVN-branch-1.4-r4629M
Echo Canceller: MG2
Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)

2 channels to configure.

Changing signalling on channel 1 from FXO Kewlstart to FXS Kewlstart
Changing signalling on channel 2 from FXS Kewlstart to FXO Kewlstart


[root@localhost zaptel]# ztcfg -vv

Zaptel Version: SVN-branch-1.4-r4629M
Echo Canceller: MG2
Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)

2 channels to configure.

Changing signalling on channel 1 from FXS Kewlstart to FXO Kewlstart
Changing signalling on channel 2 from FXO Kewlstart to FXS Kewlstart


[root@localhost zaptel]# lspci
00:14.0 Ethernet controller: Digium, Inc. TDM400P (rev 11)


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org