Hello, Steven.
Thank you for reply.
Maybe my DID-provider is buggy, but I've succesfull calls in the
other pbx with the same number.
Short examples below - second example is work.
FS (1st test)
----> INVITE (PCMU,PCMA)
<---- 100 Trying
<---- 200 OK (PCMU)
----> ACK
----> Re-INVITE (PCMA)
<---- 100 Trying
<---- 488 Not Acceptable Here
CG (2nd test)
----> INVITE (PCMU,PCMA)
<---- 100 Trying
<---- 200 OK (PCMU, PCMA)
----> ACK
----> Re-INVITE (PCMA)
<---- 100 Trying
<---- 200 OK (PCMA)
----> ACK
02.02.2013 02:41, Steven Ayre пишет:
How can I manage set of codec in inbound calls?
<X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,G729,GSM"/>
<X-PRE-PROCESS cmd="set" data="inbound_codec_prefs=PCMU,PCMA,G729,GSM"/>
<param name="inbound-codec-prefs" value="$${inbound_codec_prefs}"/>
<param name="outbound-codec-prefs" value="$${outbound_codec_prefs}"/>
Your previous configuration used the global list for both parameters.
global_codec_prefs isn't actually then used, there's a codec-prefs param
for convenience only that sets both inbound and outbound at the same time
and isn't actually needed if you're setting both.
-Steve
On 1 February 2013 11:18, Александр Мустафин
<mustafin.aleksandr@gmail.com>wrote:
Hello.
My FS receive INVITE with 2 codecs in SDP: PCMA and PCMU. After hunting
dialplan, this call forwarding to IVR, and I see next message in log:
2013-01-31 01:23:22.388780 [DEBUG] sofia_glue.c:5094 Audio Codec Compare
[PCMU:0:8000:20:64000]/[PCMU:0:8000:20:64000]
2013-01-31 01:23:22.388780 [DEBUG] sofia_glue.c:3077 Set Codec
sofia/internal/9089080908@PSTN PCMU/8000 20 ms 160 samples 64000 bits
2013-01-31 01:23:22.388780 [DEBUG] switch_core_codec.c:111
sofia/internal/9089080908@PSTN Original read codec set to PCMU:0
And FS send 200 OK to remote side with one codec in SDP: PCMU.
My parameters:
In internal.xml (profile)
<param name="inbound-codec-prefs" value="$${global_codec_prefs}"/>
<param name="outbound-codec-prefs" value="$${global_codec_prefs}"/>
In vars.xml
<X-PRE-PROCESS cmd="set"
data="global_codec_prefs=PCMU,PCMA,G729,G722,GSM"/>
<X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,G729,GSM"/>
<X-PRE-PROCESS cmd="set" data="inbound_codec_prefs=PCMU,PCMA,G729,GSM"/>
This is normal behavior?How can I manage set of codec in inbound calls?
Best regards, Alexander.
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org