On Oct 11, 2017, at 3:33 PM, vikas sharma <vikas452@gmail.com> wrote:Thanks Michael for responding.I will check that.I also found difference in the RTP packet count received on A Leg port of Freeswitch and sent out from B Leg port.I have taken packet dump on server and checked this in RTP streams stats in wireshark.For example 500 video packets were received on A Leg of Freeswitch and then 70 packets were sent out from B Leg to the private ip/port and 350 were sent to public ip/port but still 80 packets are missing.I found a significant difference for bad network condition.Could you please give me some suggestions for this issue??On 12-Oct-2017 12:07 AM, "Michael Jerris" <mike@jerris.com> wrote:check out the confluence page on handling nat, and make sure your clients are sending the public not the private ip for media addr.On Oct 11, 2017, at 6:26 AM, vikas sharma <vikas452@gmail.com> wrote:I have also found that Freeswitch starts sending RTP on the private ip/port first.Ideally it shall not be there.Please let me know if there is any specific setting for RTP nat handling so that Freeswitch send directly on public ip/port only.thanksOn Wed, Oct 11, 2017 at 12:03 PM, vikas sharma <vikas452@gmail.com> wrote:ThanksHiCan i get some suggestions to improve the video call quality and reduce packet loss with Freeswitch server.On Wed, Sep 27, 2017 at 11:00 AM, vikas sharma <vikas452@gmail.com> wrote:Anything that can help me in this regard??On Mon, Sep 25, 2017 at 4:03 PM, vikas sharma <vikas452@gmail.com> wrote:ThanksHow can we improve the video call quality in moderate network conditions.Can somebody help me to understand what exactly happens with the RTP packets on server and why there is a difference in the RTP count??HiI am making a linphone to linphone call using Freeswitch server in Defualt mode but i am facing huge RTP loss and the video call is getting stuck in between.I have also found that there is a difference between the RTP packets received on A Leg and sent from B-leg and vice versa.