I spent a couple of hours trying to get it going today but no luck.  I did have it working before but I would say its never been something I have been comfortable with.

My work around would be to use individual extensions and BLF keys.  Just make sure you have the following set on advanced under the account on the Yealink:

  * Subscribe Period(seconds) - 1800
  * Subscribe Register - Enabled
  * Dialog-Info Call Pickup - Enabled

Then on the DSS keys page configure the buttons like this:

- Type BLF
- Value  - The remote extension e.g. 1002
- Line - The account number registered e.g. Line 1 = Account 1
- Extension - Your intercept dial plan my case **

When you put the call on hold on one of the phones it will flash on the BLF key.  Then if you push the button it should dial **MONITORED_EXTENSION e.g. **1001

Here is an example of my Intercept dial plan.

      <extension>
        <condition field="destination_number" expression="^\*\*([0-9]{4})$">
          <action application="answer"/>
          <action application="intercept" data="${db(select/${domain}-last_dial_ext/$1}"/>
          <action application="log" data="INFO INTERCEPT ${db(select/${domain}-last_dial_ext/$1}"/>
          <action application="sleep" data="1000"/>
        </condition>
      </extension>


In the dial plan that dials your extensions extensions I would insert some db entries like this, replace YOUR-DOMAIN, my installation is a multi-domain scenario:

      <extension name="9000 Default">
        <condition field="destination_number" expression="^(9000)$">
          <action application="set" data="hangup_after_bridge=true"/>
          <action application="set" data="ignore_early_media=true"/>
          <action application="set" data="continue_on_fail=true"/>
          <action application="set" data="call_timeout=20"/>
          <action application="db" data="insert/YOUR-DOMAIN-last_dial_ext/1001/${uuid}"/>
          <action application="db" data="insert/YOUR-DOMAIN-last_dial_ext/1023/${uuid}"/>
          <action application="bridge" data="user/1001@YOUR-DOMAIN/>
        </condition>
      </extension>


This is how I have got around the issue.  

ash.

On 22/02/2012, at 3:02 PM, Yehavi Bourvine wrote:

Last time I tried (about half a year ago) it didn't work.
 
                   __Yehavi:


2012/2/21 Ira Tessler <ira@connectmevoice.com>

Does anybody have any documentation on how to get Yealink phones to work with Shared Line Appearance?

 

Ira Tessler

ConnectMe

(732) 490-9007 x2

www.connectmevoice.com

 

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org