> I am new to freeSWITCH, and working trough the examples from the

> FreeSWITCH (1.2)  Book.

> 

> I have the system built, and running, and everything looks OK. The

> system registers with my VoIP provider (voip.ms), an IP phone registers

> with FreeSWITCH, and I can call out to the POTS. However, when I try to

> call into the IP phone, I can see the incoming call information at

> fs_cli, but it instantly hangs up, and never goes through to the

> intended destination set up in dialplan/public/01_voipms.xml. The

> message that I get is

> 

> [NOTICE] switch_core_state_machine.c:315

> sofia/external/613XXXXXXX@158.85.70.XXX has executed the last dialplan

> instruction, hanging up

Suggest you take a look at:

Since is has 'executed the last dialplan instruction' it has failed to find a match within

any of the dialplan instructions and it hangs up.

Take a look back through the lines appearing in your fs_cli and try to find the line

containing a reference to '01_voipms.xml' and you will probably notice the problem

a few characters after: 'Regex (FAIL)'

This will be where your incoming voip.ms phone number fails to match what you have

in the dialplan intended destination setup.

Hope this helps.

-kim