Typo fixed, thanks!

Yes that is correct, you can put more than one transcoding board on one system. We also have working in our labs a version of the transcoding module which can use transcoding resources from other machines (so if you have a transcoding board in another box in the same LAN you can use those transcoding resources too). Hopefully we will have this module in FreeSWITCH trunk soon!

Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | NEW 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada
t. 1 905 474 1990 x128 | e. moy@sangoma.com



On Wed, Jul 28, 2010 at 12:45 PM, Nyamul Hassan <mnhassan@usa.net> wrote:
Thank you for your answer Moises.  There is a minor error in the page that you linked in your email.  The first paragraph in http://wiki.sangoma.com/sangoma-media-transcoding#sng_freeswitch_usage mistakenly says "Asterisk" instead of "FreeSWITCH".

So, if slots on the motherboard are available, we can have 4xA108 and 2xD100 on one system.  Correct?

Regards
HASSAN



On Wed, Jul 28, 2010 at 21:53, Moises Silva <moises.silva@gmail.com> wrote:
Not sure about that. You'd have to test and hopefully let us know. You may also purchase a Sangoma PCI transcoding card to offload all transcoding to hardware, up to 480 transcoding sessions (2 legs per session) per card :-)

http://wiki.sangoma.com/sangoma-media-transcoding


Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | NEW 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada
t. 1 905 474 1990 x128 | e. moy@sangoma.com



On Wed, Jul 28, 2010 at 11:17 AM, Nyamul Hassan <mnhassan@usa.net> wrote:
Nice!

Can a single quad core also do transcoding between G.729 and G.711?

Regards
HASSAN



On 2010-07-28, Moises Silva <moises.silva@gmail.com> wrote:
>> *From:* freeswitch-users-bounces@lists.freeswitch.org [mailto:
>> freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Imthiyaz
>> Ahmed
>> *Sent:* Tuesday, July 27, 2010 12:11 PM
>> *To:* FreeSWITCH Users Help
>> *Subject:* [Freeswitch-users] Freeswitch Sangoma support for 32 E1 in one
>> server
>>
>>
>>
>> Hi all
>>
>>
>>
>> I would like to know it is a good idea that we install 32  sangoma E1s in
>> one server with freeswitch ,openzap and run it on production? We expect
>> about 960 concurrent tdm calls to go through from the server.
>>
>>
> We do such setups regularly as part of our stress testing with our SS7 and
> PRI/BRI stacks. Typically a quad-core with 4 A108's.
>
> Moises Silva
> Senior Software Engineer
> Sangoma Technologies Inc. | NEW 100 Renfrew Drive, Suite 100, Markham ON L3R
> 9R6 Canada
> t. 1 905 474 1990 x128 | e. moy@sangoma.com


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org