No thats not what we want to do. But, we figured out the issue. Our sipml5 webclient is sending media profile thats not supported by slandered SIP. sipml5 sends something like, 

m=audio 56381 UDP/TLS/RTP/SAVPF 109 0 8 101

However, as far as we concern, according to standard SIP definition, the UDP/TLS/ part shouldn't be there. (Probably this is an addition for webRTP). Our Asterisk server took the call cause we had SRTP-DTLS configured there. 

So, now we stripped off the UDP/TLS/  part from kamailio (sending RTP/AVP only) and now calls are going through. 

Thanks for your help guys!

--Forwarded Message Attachment--
From: brian@freeswitch.org
To: freeswitch-users@lists.freeswitch.org

Date: Wed, 20 Aug 2014 15:59:41 -0500

Subject: Re: [Freeswitch-users] WebRTC Calls via Kamailio rejecting with 488

have you tried talking directly to FreeSWITCH via websockets?

On Wed, Aug 20, 2014 at 3:23 PM, Kamrul Khan <dodul@live.com> wrote:

No I didnt

--Forwarded Message Attachment--
From: brian@freeswitch.org
To: freeswitch-users@lists.freeswitch.org
Date: Wed, 20 Aug 2014 14:03:43 -0500
Subject: Re: [Freeswitch-users] WebRTC Calls via Kamailio rejecting with 488

Have you modified the default sofia profile codec preferences at all?

On Wed, Aug 20, 2014 at 1:47 PM, Kamrul Khan <dodul@live.com> wrote:

Hi,

This is the continuation of my previous mail, "Freeswitch srtp rejecting SRTP with 488þ". I have changed the subject line as according to the feedback from this mailing list Im convinced its not a SRTP issue. Let me describe my scenario a bit more detail. 

I am generating call from a webclient using simpl5. The call then hits a Kamailio server and Kamailio here acts like a webRTC proxy that forwards the call to Freeswitch. Freeswitch receives the call on udp port 5060. (not over websocket)

We tested the same thing with asterisk and thats working fine. but when we try it with Freeswitch it rejects the call with 488. And in console log it shows   [CS_NEW] [INCOMPATIBLE_DESTINATION]

Now, we assume (as per the feedback from this mailing list) the issue is not with SRTP but with codec negotiation. Therefore, for testing purpose we stripped off all the codec attributes from our INVITE leaving only rtpmap:0 PCMU/8000 and tested again. We were hoping to see something new in our console log this time but surprisingly it showed up the exact same log as before. The console log is given below. Please somebody give us some clue whats going wrong? Thanks in advanced.

2014-08-20 05:03:42.183856 [DEBUG] sofia.c:5847 IP 192.168.146.133 Rejected by acl "domains". Falling back to Digest auth.

2014-08-20 05:03:42.253550 [DEBUG] sofia.c:5847 IP 192.168.146.133 Rejected by acl "domains". Falling back to Digest auth.

2014-08-20 05:03:42.269373 [NOTICE] switch_channel.c:669 New Channel sofia/internal/alice@192.168.146.133 [07526f12-2862-11e4-8afd-9de9b4eb98f8]

2014-08-20 05:03:42.272360 [DEBUG] switch_core_state_machine.c:314 (sofia/internal/alice@192.168.146.133) Running State Change CS_NEW

2014-08-20 05:03:42.272360 [DEBUG] switch_core_state_machine.c:320 (sofia/internal/alice@192.168.146.133) State NEW

2014-08-20 05:03:42.281094 [DEBUG] sofia.c:4153 Channel sofia/internal/alice@192.168.146.133 entering state [received][100]

2014-08-20 05:03:42.281094 [DEBUG] sofia.c:4164 Remote SDP:

v=0

o=Mozilla-SIPUA-31.0 20849 1 IN IP4 0.0.0.0

s=Doubango Telecom - firefox

t=0 0

a=ice-ufrag:ca607972

a=ice-pwd:dd5932ce75801e50fae435678cd6755b

a=fingerprint:sha-256 8B:B0:38:A0:DA:3D:7C:DE:7F:76:F0:35:AF:1A:DE:E9:25:8C:16:E7:D4:3F:75:B2:64:56:79:21:2D:16:7D:05

m=audio 57096 UDP/RTP 0

c=IN IP4 184.69.59.132

a=ptime:20

a=rtpmap:0 PCMU/8000

a=fmtp:101 0-15

a=extmap:1 urn:ietf:params:rtp-hdrext:ssrc-audio-level

a=setup:actpass

a=candidate:0 1 UDP 2128609535 172.16.1.188 57096 typ host

a=candidate:1 1 UDP 1692467199 184.69.59.132 57096 typ srflx raddr 172.16.1.188 rport 57096

a=candidate:5 1 UDP 2128543999 192.168.56.1 57097 typ host

a=candidate:10 1 UDP 2128478463 192.168.232.1 57098 typ host

a=candidate:15 1 UDP 2128412927 192.168.146.1 57099 typ host

a=candidate:0 2 UDP 2128609534 172.16.1.188 57100 typ host

a=candidate:1 2 UDP 1692467198 184.69.59.132 57100 typ srflx raddr 172.16.1.188 rport 57100

a=candidate:5 2 UDP 2128543998 192.168.56.1 57101 typ host

a=candidate:10 2 UDP 2128478462 192.168.232.1 57102 typ host

a=candidate:15 2 UDP 2128412926 192.168.146.1 57103 typ host

a=rtcp-mux

2014-08-20 05:03:42.281094 [NOTICE] sofia.c:4354 Hangup sofia/internal/alice@192.168.146.133 [CS_NEW] [INCOMPATIBLE_DESTINATION]

2014-08-20 05:03:42.281094 [DEBUG] switch_channel.c:2102 Send signal sofia/internal/alice@192.168.146.133 [KILL]

2014-08-20 05:03:42.282146 [DEBUG] switch_core_session.c:1021 Send signal sofia/internal/alice@192.168.146.133 [BREAK]

2014-08-20 05:03:42.282146 [DEBUG] switch_core_state_machine.c:314 (sofia/internal/alice@192.168.146.133) Running State Change CS_HANGUP

2014-08-20 05:03:42.282146 [DEBUG] switch_core_state_machine.c:499 (sofia/internal/alice@192.168.146.133) State HANGUP

2014-08-20 05:03:42.282146 [DEBUG] mod_sofia.c:414 Channel sofia/internal/alice@192.168.146.133 hanging up, cause: INCOMPATIBLE_DESTINATION

2014-08-20 05:03:42.328550 [DEBUG] mod_sofia.c:476 Responding to INVITE with: 488

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:46 sofia/internal/alice@192.168.146.133 Standard HANGUP, cause: INCOMPATIBLE_DESTINATION

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:499 (sofia/internal/alice@192.168.146.133) State HANGUP going to sleep

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:333 (sofia/internal/alice@192.168.146.133) State Change CS_HANGUP -> CS_REPORTING

2014-08-20 05:03:42.328550 [DEBUG] switch_core_session.c:1021 Send signal sofia/internal/alice@192.168.146.133 [BREAK]

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:314 (sofia/internal/alice@192.168.146.133) Running State Change CS_REPORTING

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:590 (sofia/internal/alice@192.168.146.133) State REPORTING

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:53 sofia/internal/alice@192.168.146.133 Standard REPORTING, cause: INCOMPATIBLE_DESTINATION

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:590 (sofia/internal/alice@192.168.146.133) State REPORTING going to sleep

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:327 (sofia/internal/alice@192.168.146.133) State Change CS_REPORTING -> CS_DESTROY

2014-08-20 05:03:42.328550 [DEBUG] switch_core_session.c:1021 Send signal sofia/internal/alice@192.168.146.133 [BREAK]

2014-08-20 05:03:42.328550 [DEBUG] switch_core_session.c:1164 Session 18 (sofia/internal/alice@192.168.146.133) Locked, Waiting on external entities

2014-08-20 05:03:42.328550 [NOTICE] switch_core_session.c:1182 Session 18 (sofia/internal/alice@192.168.146.133) Ended

2014-08-20 05:03:42.328550 [NOTICE] switch_core_session.c:1184 Close Channel sofia/internal/alice@192.168.146.133 [CS_DESTROY]

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:428 (sofia/internal/alice@192.168.146.133) Running State Change CS_DESTROY

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:439 (sofia/internal/alice@192.168.146.133) State DESTROY

2014-08-20 05:03:42.328550 [DEBUG] mod_sofia.c:341 sofia/internal/alice@192.168.146.133 SOFIA DESTROY

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:60 sofia/internal/alice@192.168.146.133 Standard DESTROY

2014-08-20 05:03:42.328550 [DEBUG] switch_core_state_machine.c:439 (sofia/internal/alice@192.168.146.133) State DESTROY going to sleep

From: freeswitch-users-request@lists.freeswitch.org
Subject: FreeSWITCH-users Digest, Vol 98, Issue 138
To: freeswitch-users@lists.freeswitch.org
Date: Wed, 20 Aug 2014 22:18:01 +0400

Send FreeSWITCH-users mailing list submissions to
	freeswitch-users@lists.freeswitch.org


 

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
or, via email, send a message with subject or body 'help' to



	freeswitch-users-request@lists.freeswitch.org
 
You can reach the person managing the list at
	freeswitch-users-owner@lists.freeswitch.org



 
When replying, please edit your Subject line so it is more specific
than "Re: Contents of FreeSWITCH-users digest..."

--Forwarded Message Attachment--
From: andretodd@verizon.net
To: freeswitch-users@lists.freeswitch.org
Date: Wed, 20 Aug 2014 13:35:01 -0400
Subject: Re: [Freeswitch-users] high pdd

Hi, I’m using the master. Should I try 1.4.7?
 
I’ve done a dump after things started to go bad/ backed up.
 
I see 8193 threads in _thread_cond_timedwait. Looks like its on line 81 of thread_cond.c  res = WaitForSingleObject(cond->semaphore, timeout_ms);
 
The value of timeout_ms is 2016850392.
 
Not sure if this means anything.
 
Thanks for the support guys.
 
Andre
 
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West
Sent: Wednesday, August 20, 2014 11:57 AM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] high pdd
 

1.2.X is EOL, 

 

1.4.7 is the current release.

 

We have releases and tags in git that no longer carry the 'stable' moniker starting with 1.4.  

 

On Sun, Aug 17, 2014 at 1:39 PM, Andre Demattia <andretodd@verizon.net> wrote:

Thanks, I'm using the newest master and the last stable 1.2.23
We are willing to pay to get this fixed.
Andre

---

From: Anthony Minessale
Sent: ý8/ý17/ý2014 12:30 PM

To: Freeswitch-users
Subject: Re: [Freeswitch-users] high pdd

We dont have a lot of tools to troubleshoot windows.  You should mention windows in your subject to have a better chance to get the attention of our windows users.
You should consider installing debian 7 on the same hardware and perform similar tests to help determine if your issue is o/s specific or not.
You also have not indicated the revision of FS.  If you have not worked with latest master, you should be also to rule out improvements.

On Aug 17, 2014 9:54 AM, "Andre Demattia" <andretodd@verizon.net> wrote:

Yes that's off and I believe all the databases are off too. No authentication or registration is enabled.  The sizes of the database are 0 until I call the shutdown command then its about 90k.  I have the DBS in Ra drive too.

Windows seems pretty good until the 3000 sessions per min mark. Then I just get long pdd and the threads get backed up then no more sessions can be created.

Funny thing is I has 10 profiles and the same results. I also tried two consoles with the same results.

FreeSWITCH is great.

I'd be grateful for help. I've worked on this for 2 years and hate to give up.

If any one from consulting@freeswitch.org is willing to help I'd appreciate that.

Thanks again,
Andre

---

From: Anthony Minessale
Sent: ý8/ý17/ý2014 10:13 AM
To: Freeswitch-users
Subject: Re: [Freeswitch-users] high pdd

Did you comment out manage-presence ?  Also we have no real idea how well FS performs in windows under extreme load.

On Aug 17, 2014 5:42 AM, "Andre Demattia" <andretodd@verizon.net> wrote:

Thanks Ken, I'll try the consulting again.
Andre

---

From: Ken Rice
Sent: ý8/ý17/ý2014 1:19 AM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] high pdd

if the last post does not work contact consulting@freeswitch.org for pro help from one of the developers... thats about as far as the list will take you

Ken

Sent from my iPad

On Aug 16, 2014, at 15:23, "Andre" <andretodd@verizon.net> wrote:

Going with the idea it’s IO related I did a db_cache status. I just disabled limit in my code by removing it but limit should be HASH not a database however I stills how a database.
 
Below is the results of the db cache status. I’m not real sure what its saying. I should have all registration and limit disabled and should not be using any sql database from my understanding.
 
Anyone know what the results mean? I’ve only tested 2 calls on this status.

 

[The entire original message is not included.]

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users

 

[The entire original message is not included.]

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

 

--

Brian West
brian@freeswitch.org

Twitter: @FreeSWITCH , @briankwest
http://www.freeswitchbook.com
http://www.freeswitchcookbook.com
T:+19184209001 | F:+19184209002 | M:+1918424WEST (9378)
iNUM:+883 5100 1420 9001 | ISN:410*543 | Skype:briankwest

--Forwarded Message Attachment--
From: stuart.mills3@btopenworld.com
To: freeswitch-users@lists.freeswitch.org
Date: Wed, 20 Aug 2014 19:17:34 +0100
Subject: Re: [Freeswitch-users] Media after hang-up???

Hi Mike,

 

Thanks for the reply.

 

I know for sure this isn’t FreeSWITCH causing the issue, I get the CDR posted at the right time and durations are correct, it’s almost as if the far end PBX hasn’t noticed the hang-up, even though the BYE does get sent.

 

My carrier mentioned today (following a full trace from their end) that the PBX isn’t sending an ACK to the BYE, does that make any sense given the issue I am seeing? My main issue here is if it’s a PBX configuration issue, I am unable to look at and diagnose myself, so some sort of starting point would be really helpful .

 

Cheers,

 

Stuart

 

From: Michael Jerris

Sent: Wednesday, August 20, 2014 5:25 PM

To: FreeSWITCH Users Help

Subject: Re: [Freeswitch-users] Media after hang-up???

 

I have never seen an issue like this, a pcap might tell you more, but i seriously doubt we are still sending media after the call hangs up.  I would suggest taking a look at a pcap and the debug logs and seeing that the call is actually being hung up on the leg facing the pbx and we really stop sending media.

 

Mike

 

On Aug 19, 2014, at 8:19 PM, Stuart Mills <stuart.mills3@btopenworld.com> wrote:

Hi,

 

I’m experiencing a strange issue calling a destination within the UK, whereby media seems to still be connected after hang up.

 

I only know this as the destination is a PBX, supplied by Unify (formerly Siemens), and that PBX on occasions records a voicemail, when a message is taken and after the call is hung up, there is a continuous tone heard on the end of the recording. The call logs show the right duration and the carrier has also confirmed that the call ended as the logs suggest.

 

So, I’m wondering if anyone else has come across the same sort of issue using FreeSWITCH? The end user has told me they never used to experience this issue using a different provider, and I can’t reproduce this issue at all using other types of PBX, all calls end as they should and voicemail recordings end when the call does.

 

This issue doesn’t seem to be a FreeSWITCH one, just thought it worth an ask to the group.

 

Cheers,

 

Stuart

---

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

--

Brian West
brian@freeswitch.org


Twitter: @FreeSWITCH , @briankwest
http://www.freeswitchbook.com
http://www.freeswitchcookbook.com
T:+19184209001 | F:+19184209002 | M:+1918424WEST (9378)
iNUM:+883 5100 1420 9001 | ISN:410*543 | Skype:briankwest

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

--

Brian West
brian@freeswitch.org


Twitter: @FreeSWITCH , @briankwest
http://www.freeswitchbook.com
http://www.freeswitchcookbook.com
T:+19184209001 | F:+19184209002 | M:+1918424WEST (9378)
iNUM:+883 5100 1420 9001 | ISN:410*543 | Skype:briankwest

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org