Highly recommend Sangoma for PRI or BRI, used both in the past, they’re straight forward to install and Sangoma officially support FreeSWITCH.

 

We used the Sangoma A101E for PRI.

FreeSWITCH installation guide and sample configuration here: https://wiki.freepbx.org/display/PC/Telephony+Cards+for+FreeSWITCH

 

There are various models available depending on the number of ports and channels but you should always get the E version which includes the echo cancellation module (it’s tricky to buy the echo cancellation module separately):

http://www.sangoma.com/products/digital-telephony-cards/

 

 

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Deepika Yadav
Sent: 04 May 2017 10:12
To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>
Subject: [Freeswitch-users] Freeswitch PRI support

 

Hi,

 

I am using Freeswitch in an application that initiates conference calls amongst 20 users in cellular network (mobile phones in GSM network). Currently, for the VOIP-GSM gateway, we are using the service from a company called Doorvaani. 

 

But, since, the cost of call estimates to be high and we cannot debug the call drops; we are thinking to buy our own PRI card. 

 

I am seeking recommendation on following points:

  1. Which card should I buy that is most easily configurable with the Freeswitch i.e. company and type. 
  2. Reference on how should I start to make Freeswitch configure with the PRI card and start sending and receiving calls. For the current gateway service in use, I simply put the authentication credentials for the corresponding VOIP line offered by the company Doorvaani in the external SIP Profile. In case of PRI, what all changes are needed?

Regards,

Deepika

 

--

Regards
Deepika
https://www.iiitd.edu.in/~deepikay/


______________________________________________________________________
This message has been checked for all known viruses by MessageLabs Virus Scanning Service.
______________________________________________________________________

Shaun Stokes - Infrastructure Analyst
T : 01453 700713
E : shaun.stokes@itec-support.co.uk
W : www.itec-support.co.uk
Registered Address :- ITEC Support, Suite 2 Prospect House, Bath Road, Stroud, Gloucestershire GL5 3QF
Company No. 06908001

CONFIDENTIALITY NOTICE
This communication and the information it contains are intended for the person or organisation to which it is addressed. Its contents are confidential and may be protected in law. Unauthorised use, copying or disclosure of any of it may be unlawful. If you are not the intended recipient, please contact us immediately.
The contents of any attachments in this e-mail may contain software viruses, which could damage your own computer system. While ITEC Support has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checking procedure before opening any attachment.

______________________________________________________________________
This message has been checked for all known viruses by MessageLabs Virus Scanning Service.
______________________________________________________________________