On Fri, Mar 4, 2011 at 5:26 AM, GillesToo <codecomplete@free.fr> wrote:

I assume Freeswitch will have the same issue since FreeTDM relies on Dahdi
to work with this type of hardware, but I'd like confirmation of this.

FreeTDM currently has the same limitation unless your telco/switch sends polarity reverse on answer. If polarity reversal is enabled, then FreeTDM will not put the channel in state UP until the telco reverses the polarity to signal answer.

This has nothing to do with the dependency on DAHDI for Digium cards btw.

Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada
t. 1 905 474 1990 x128 | e. moy@sangoma.com