On Jul 17, 2018, at 11:09 AM, Royce Mitchell III <royce3@gmail.com> wrote:According to this page:"Note that a limit is active within a given context - if you transfer an inbound call from the public dialplan to an extension in the default dialplan - any limit you just set in the public dialplan will be reset."Either I am misunderstanding something, or this statement may not be 100% accurate for version FreeSWITCH Version 1.6.20+git~20180507T185611Z~43a9feb7f8~64bit (git 43a9feb 2018-05-07 18:56:11Z 64bit)The following is an excerpt from the logs showing a call in the public context getting transferred to another destination in the public context and the limit is getting reset:EXECUTE sofia/external/CENSORED@CE.NS.OR.ED limit(hash inbound IHCAV 2 didlimit$1)2018-07-17 10:30:15.452366 [DEBUG] switch_limit.c:126 incr called: inbound_IHCAV max:2, interval:02018-07-17 10:30:15.452366 [DEBUG] mod_hash.c:196 Usage for inbound_IHCAV is now 1/2EXECUTE sofia/external/CENSORED@CE.NS.OR.ED transfer(freedom2 xml public)2018-07-17 10:30:15.452366 [DEBUG] switch_ivr.c:2165 (sofia/external/CENSORED@CE.NS.OR.ED) State Change CS_EXECUTE -> CS_ROUTING2018-07-17 10:30:15.452366 [DEBUG] mod_hash.c:297 Usage for inbound_IHCAV is now 02018-07-17 10:30:15.452366 [NOTICE] switch_ivr.c:2172 Transfer sofia/external/CENSORED@CE.NS.OR.ED to xml[freedom2@public]Am I missing something? Is there a way to keep the call in the limit count when transferring it to the same context?