I’ve tried this setting as well:

Neither way seems to work. What’s strange is, I have an Adtran voice gateway at 172.16.15.11 that is sending calls to the FS box without any problems. The sipX server on the same subnet, 10.10.3.0 /25 can’t send calls without generating the Proxy Authentication Required message. Is this just because it’s on the same LAN as the FS box?

Thanks,

Ken

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of David Ponzone
Sent: Tuesday, April 20, 2010 3:25 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Two Major Problems

ken,

are you sure it's not apply-inbound-acl you want to set ?

David Ponzone Direction Technique

email: david.ponzone@ipeva.fr

tel: 01 74 03 18 97

gsm: 06 66 98 76 34

Service Client IPeva

tel: 0811 46 26 26

www.ipeva.fr - www.ipeva-studio.com

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.

Le 20/04/2010 à 22:03, Ken Fulmer a écrit :

I’m now using an ACL list called “lan”.

</list>

In the external sip profile, I have the following statement:

I still get the Proxy Authentication Required error. Am I doing something wrong?

Thanks,

Ken

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Tjardick van der Kraan
Sent: Sunday, April 11, 2010 4:36 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Two Major Problems

Use the CIDR XML key not domain:

http://wiki.freeswitch.org/wiki/Acl

Regards,

On 09 Apr 2010, at 19:07, Ken Fulmer wrote:

Per your suggestion, I changed the following in the conf/autoload_configs/acl.conf.xml file:

</list>

10.10.3.10 and 10.10.3.11 are the ip addresses of our internal servers. However, the calls still fail with the 407 Proxy Authentication Required message.

I get the following log output when I issue the command, reloadacl:

2010-04-09 12:06:31.259954 [NOTICE] switch_core.c:954 Created ip list rfc1918.auto default (deny)

freeswitch@internal> 2010-04-09 12:06:31.259954 [NOTICE] switch_utils.c:195 Adding 10.0.0.0/8 (allow) [] to list rfc1918.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_utils.c:195 Adding 172.16.0.0/12 (allow) [] to list rfc1918.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_utils.c:195 Adding 192.168.0.0/16 (allow) [] to list rfc1918.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_core.c:962 Created ip list wan.auto default (allow)

2010-04-09 12:06:31.259954 [NOTICE] switch_utils.c:195 Adding 10.0.0.0/8 (deny) [] to list wan.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_utils.c:195 Adding 172.16.0.0/12 (deny) [] to list wan.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_utils.c:195 Adding 192.168.0.0/16 (deny) [] to list wan.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_core.c:970 Created ip list nat.auto default (deny)

2010-04-09 12:06:31.259954 [NOTICE] switch_core.c:972 Adding 10.10.3.12/255.255.255.128 (deny) to list nat.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_utils.c:195 Adding 10.0.0.0/8 (allow) [] to list nat.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_utils.c:195 Adding 172.16.0.0/12 (allow) [] to list nat.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_utils.c:195 Adding 192.168.0.0/16 (allow) [] to list nat.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_core.c:981 Created ip list loopback.auto default (deny)

2010-04-09 12:06:31.259954 [NOTICE] switch_utils.c:195 Adding 127.0.0.0/8 (allow) [] to list loopback.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_core.c:987 Created ip list localnet.auto default (deny)

2010-04-09 12:06:31.259954 [NOTICE] switch_core.c:990 Adding 10.10.3.12/255.255.255.128 (allow) to list localnet.auto

2010-04-09 12:06:31.259954 [NOTICE] switch_core.c:1015 Created ip list domains default (deny)

2010-04-09 12:06:31.259954 [WARNING] switch_core.c:1046 Cannot locate domain 10.10.3.10

2010-04-09 12:06:31.259954 [WARNING] switch_core.c:1046 Cannot locate domain 10.10.3.11

Am I doing something incorrectly?

Thanks,

Ken

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins
Sent: Thursday, April 08, 2010 6:25 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Two Major Problems

On Thu, Apr 8, 2010 at 3:18 PM, Ken Fulmer <kenfulmer@icstechnologysolutions.com> wrote:

Actually, I did purchase a license and installed it today. One call establishes at 729. When I hang up the phone and try again, it’s 711.

Make sure that the encoder/decoder isn't still in use prior to trying the second call. After you hang up, do a "show channels" and see if the call is still "up" or not. Also, do "g729_status" to see if the encoder or decoder is in use. Keep doing "g729_status" until the 'coders are not in use. If there is a long delay then open up a JIRA ticket on jira.freeswitch.org.

The Proxy Authentication Required is being sent by FreeSwitch to the internal PBX. I have registration disabled on the FreeSwitch gateway and the internal server.

By default the SIP profile will challenge if the IP address of the caller is not in the ACL. Open conf/autoload_configs/acl.conf.xml and locate the "domains" node. Add your PBX's IP address. You'll see an example in the comments. Once you're done editing, save the file and then go to the fs_cli and do:
reloadacl reloadxml

Then make a call from PBX to FS and it should go through.
-MC

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org