Hi Nazim,_______________________________________________
Do I need to add this into my deafult.xml file or public.xml file?
I have added bellow code into default.xml file
<extension name="Voicepulse">
<condition field="destination_number" expression="xxxxyyyxx"> // xxxyyyxx -- > my PRI number
<action application="transfer" data="1000 XML default"/>
</condition>
</extension>
After adding this rules, when I am trying to call from mobile to freeSwitch, its says that, number is busy.
then, I changed this code from default.xml to public.xml file.
Still, no luck :(
Regards,
Venkat.On Wed, Jul 21, 2010 at 8:49 PM, Nazim Aghabayov <nazim.aghabayov@gmail.com> wrote:
Hello Venkat,
I'm glad it works for you. For incoming you could do something like:
<extension name="telco-incoming">
<condition field="destination_number" expression="^(4970000)$">
<action application="transfer" data="1003 XML default"/>
</condition>
</extension>
Regards,
Nazim
On 07/20/2010 06:07 PM, ovvenkat wrote:
> Hi Nazim,
>
> Could you plz tell me, how to handle the incoming call if you could
> plz give me some sample dialplan to handle the incoming call would be
> great.
>
> Regards,
> Venkat.
>
>
>
> On Tue, Jul 20, 2010 at 6:32 PM, ovvenkat <ovvenkatesan@gmail.com
> <mailto:ovvenkatesan@gmail.com>> wrote:
>
>
>
>
> Thank you very much Nazim , It works :) .
>
>
> Regards,
> Venkat.
>
>
>
> On Tue, Jul 20, 2010 at 4:02 PM, Nazim Aghabayov
> <mailto:1000@192.168.1.110> <mailto:1000@192.168.1.110> <nazim.aghabayov@gmail.com <mailto:nazim.aghabayov@gmail.com>> wrote:
>
> Hello Venkat,
>
> Below is my working configuration for q931 euro-isdn.
> Please have a look at:
> http://wiki.sangoma.com/wanpipe-freeswitch-config
> && http://wiki.sangoma.com/wanpipe-pri-daemon-options
>
>
> openzap.conf
> ---------------------------------
> [span wanpipe PRI_1]
> name => PRI_1
> number => 1
> trunk_type => e1
> b-channel => 1:1-15
> b-channel => 1:17-31
>
>
> openzap.conf.xml
> -----------------------------------
> <configuration name="openzap.conf" description="OpenZAP
> Configuration">
> <settings>
> <param name="debug" value="0"/>
> </settings>
> <boost_spans>
> <span name="PRI_1">
> <!-- Log Levels: none, alert, crit, err, warning, notice,
> info, debug -->
> <param name="q921loglevel" value="alert"/>
> <param name="q931loglevel" value="debug"/>
> <param name="mode" value="user"/>
> <param name="dialect" value="q931"/>
> <param name="dialplan" value="XML"/>
> <param name="context" value="default"/>
>
> <!-- my mystical telco, they insisting on TON = NPI = 0 -->
> <param name="outbound-called-ton" value="unknown"/>
> <param name="outbound-called-npi" value="unknown"/>
> <param name="outbound-rdnis-ton" value="unknown"/>
> <param name="outbound-rdnis-npi" value="unknown"/>
> <param name="outbound-calling-ton" value="unknown"/>
> <param name="outbound-calling-npi" value="unknown"/>
> </span>
> </boost_spans>
> </configuration>
>
>
> dialplan
> ---------------
> <extension name="priout">
>
> <condition field="destination_number"
> expression="(?!4970000)\d{7}">
>
> <action application="set"
> data="effective_caller_id_number=4970000"/>
> <action application="set"
> data="effective_caller_id_name=4970000"/>
>
> <action application="bridge"
> data="openzap/PRI_1/a/${destination_number}@g1"/>
>
> </condition>
> </extension>
>
> Best Regards,
> Nazim
>
>
> On 07/19/2010 01:36 PM, ovvenkat wrote:
> > Hi to all,
> >
> > I am very new to this world. I am not able to do outbound
> call using
> > Sangoma A101 card and freeSwitch.
> >
> > Here is the procedure I have followed
> >
> > *openzap.conf*
> >
> > [span wanpipe smg_prid]
> > name => smg_prid
> > trunk_type =>e1
> > b-channel => 1:1-15
> > d-chennel => 1:16
> > b-channel => 1:17-31
> >
> > I have one span in *openzap.conf.xml*
> >
> > <configuration name="openzap.conf" description="OpenZAP
> Configuration">
> > <settings>
> > <param name="debug" value="0"/>
> > </settings>
> > <boot_spans>
> > <span id="smg_prid"/>
> > <param name="node" value="cpe"/>
> > <param name="switch" value="ni1">
> > <param name="dialplan" value="XML">
> > <param name="context" value="default">
> > </span>
> > <boot_spans>
> > <analog_spans>
> > </analog_spans>
> > </configuration >
> > </analog_spans>
> >
> > *My Dial plan is
> >
> > *added one extension in default.xml file
> >
> > <extension name="outgoing-pri">
> > <condition field="destination_number" expression="12345">
> > <action application="bridge" data="OpenZAP/smg_prid/a/<my
> number>@g1"/>
> > </condition>
> > </extension>
> >
> > When i trying to call "12345" I am getting following output
> in *fs_cli* ,
> >
> > 2010-07-19 01:50:17.531933 [DEBUG] sofia.c:5992 IP 192.168.1.100
> > Rejected by acl "domains". Falling back to Digest auth.
> > 2010-07-19 01:50:17.562934 [DEBUG] sofia.c:5992 IP 192.168.1.100
> > Rejected by acl "domains". Falling back to Digest auth.
> > 2010-07-19 01:50:17.581933 [NOTICE] switch_channel.c:776 New
> Channel
> > sofia/internal/1000@192.168.1.110
> <mailto:1000@192.168.1.110>>> <mailto:1000@192.168.1.110> <mailto:1000@192.168.1.110
> > [36c842f2-8078-4ca0-a6e0-36f5d65f81f8]
> > 2010-07-19 01:50:17.583936 [DEBUG]
> switch_core_state_machine.c:314
> > (sofia/internal/1000@192.168.1.110
> <mailto:1000@192.168.1.110>>)> <mailto:1000@192.168.1.110> <mailto:1000@192.168.1.110
> > Running State Change CS_NEW
> > 2010-07-19 01:50:17.583936 [DEBUG]
> switch_core_state_machine.c:320
> > (sofia/internal/1000@192.168.1.110
> <mailto:1000@192.168.1.110>>) State NEW> <mailto:1000@192.168.1.110> <mailto:1000@192.168.1.110
> > 2010-07-19 01:50:17.615937 [DEBUG] sofia.c:4310 Channel
> > sofia/internal/1000@192.168.1.110
> <mailto:1000@192.168.1.110>> entering> <mailto:FreeSWITCH-users@lists.freeswitch.org>
> > state [received][100]
> > 2010-07-19 01:50:17.615937 [DEBUG] sofia.c:4321 Remote SDP:
> > v=0
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users@lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
>
> --
>
> If you have come to help me, you are wasting your time.
> If you have come to because your liberation is bound up in mine,
> we can work together.
>
>
> Regards
> Venkatesan OV.
>
>
>
>
> --
>
> If you have come to help me, you are wasting your time.
> If you have come to because your liberation is bound up in mine, we
> can work together.
>
>
> Regards
> Venkatesan OV.
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users@lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
--
If you have come to help me, you are wasting your time.
If you have come to because your liberation is bound up in mine, we can work together.
Regards
Venkatesan OV.
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org